iPhone case made of aramid is light as paper but stronger than steel

You’ve no doubt heard of carbon fiber, but have you heard of aramid? How about kevlar? Kevlar is a trade name for aramid fibers which is short for “aromatic polyamide”. They are lightweight fibers with exceptional strength and thermal stability, making this material a perfect choice for an iPhone case like these new iPhone 7 and 7 Plus cases from Pitaka.

The cases are very thin and weigh less than 10g while remaining scratch resistant and grippy.

They are available in several colors including the ones you see here.

Unlike some metal phone cases, the aramid cases cause no interference to WiFi, GPS or your cellular signal.

The Pitaka aramid cases are priced at $47.99 for the iPhone 7 version and $49.99 for the iPhone 7 Plus version. For more info visit ipitaka.com and order one at a discount through Amazon. Also look for our review coming soon.

Filed in categories: Cases and Covers, News

Tagged:

iPhone case made of aramid is light as paper but stronger than steel originally appeared on on April 12, 2017 at 11:34 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Totallee iPhone 7 Plus case review

I have the iPhone 7 Plus, which is a big phone at 5.5 inches. I often look for the thinnest case possible to fit into my back pocket or small handbag. I still want protection, but without all the bulk. Totallee has released a super thin iPhone case called “the scarf”. Let’s take a look at how it fits the iPhone. 

I was given the frosted white and navy blue colors.  I like the white since it matches my silver iPhone 7 Plus and recently have been sporting the navy blue to change it up. Both cases are slightly frosted/transparent.

The case is only 0.02″ thin and made of plastic. It covers the back of the iPhone completely, as well as the sides.

The front of the case also protects the edges but doesn’t give a lot of padding.  I have dropped my phone plenty of times and to my surprise I haven’t had any dings yet with the scarf case-even on the front of the phone!

The speaker holes line up well and audio sounds normal. Some cases cover up the phone microphone and make them muffled, but with the scarf, there are no issues.

The power and volume buttons also lined up perfectly, and I was able to access them without any problems.

The camera is covered nicely, and the cutouts line up perfectly. The only thing I found a bit annoying is that the case scratches easily. I supposed that’s better than my iPhone getting scratched however.

I really enjoy using Totallee’s scarf case, as it gives me the grip I like and protection I need, without the bulk. Totallee includes a 2-year warranty for all purchases. For the price, it’s an excellent choice for anyone who is just looking for some minimal protection. Just keep in mind that if you tend to drop your phone a lot, there isn’t much thickness to the case. For me, it wasn’t a problem.

Source: The sample for this review was provided by Totallee. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $19
Manufacturer: Totallee
Retailer: Amazon
Requirements:
  • iPhone 5/5s/se
  • iPhone 6/6s
  • iPhone 6/6s plus
  • iPhone 7/7plus
Pros:
  • Very thin
  • Lightweight
  • Grippy
  • Great price
Cons:
  • Scratches easily

Filed in categories: Cases and Covers, iOS, Reviews

Tagged:

Totallee iPhone 7 Plus case review originally appeared on on March 13, 2017 at 1:24 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

DesignSkin The Slider iPhone 7 case review

Cases for smartphones are a constant subject of review here on The Gadgeteer. The latest craze I’ve seen in the case market is adding a place to store a few ID/Credit cards and some cash. The Slider, from DesignSkin, is one such case recently sent to me for testing.

Note: Photos may be tapped or clicked for a larger image.


The case is available for a handful of the most popular smartphones on the market and comes with many different graphic back panels. I requested the “Surprise the Universe” pattern. It arrived very quickly, and fit my iPhone 6s Plus perfectly. The interior of the case and the outer edges are a slightly pliant grey plastic.

There are cutouts in the usual places for camera, flash, ringer silencing switch, speaker, microphones, lightning port and headphone jack.

The volume buttons are covered, but their location is clearly marked on the case exterior. There is a similar denotation of the location of the Sleep/Wake button.

The case wraps around the screen and protrudes slightly – just enough to not actually touch any surface that you may place your phone on face down, but not really enough to protect it should there be sand or anything gritty on that surface. The edges, while not sharp, are not “grippy”, but slightly slippery. Though not as slick as a bare phone, it gives very little grip. The thickness of the plastic around the outside of the phone, however, should truly protect it in case of a drop, but that thickness works against things being connected through the ports. Docks, some headphones, several charging cables, and my DXO One camera are not able to connect well enough to operate normally. (See a dock and the regular Apple leather case versus the Slider in the two photos below.)


The “Slider” feature is just that: the rear panel of the case slides up to reveal a credit-card sized pocket that will hold 2 or 3 cards, depending on the thickness. The thin plastic that covers it shows no signs of being a screen for the wallet, so there is a good bit of stealth in the case as well. If you want to carry your driver’s license, a credit card, and a door access card, I’m sure you’d have no problem with the card being read through the backing. If you need to carry more than that, however, you’ll be out of luck, because there is zero “wiggle room” in the hidden pocket.


The printing on the back of the case is a matte finish and is evenly applied. The graphic actually appears to have depth in, but it’s just an optical illusion. Not sure if the paint will scratch off over time. It has zero scratches from the time I’ve been using it, but I usually don’t keep anything else in my shirt pocket with my phone.


All told, if you’re looking for a soft case with a nice look and a bit of protection that will let you hide a card or 3 inside, this could be your model. At $19.99, it won’t break the bank, even if you decide to get several designs.

Source: The sample for this review was provided by DesignSkin. Please visit Amazon.com to purchase.

 

Product Information

Price: $19.99
Manufacturer: DesignSkin
Retailer: Amazon
Requirements:
  • Device to protect
Pros:
  • Easy to insert phone into or to remove.
  • Allows easy, yet hidden access to cards.
  • Raises screen above tabletop
Cons:
  • Thick edges prevent some cords and accessories from attaching.

Filed in categories: Cases and Covers, iOS, Reviews

Tagged:

DesignSkin The Slider iPhone 7 case review originally appeared on on March 2, 2017 at 11:15 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

You’ll soon be able to transform your existing iPhone 7 into a jet white version

The jet black version of the iPhone 7 has been very popular and has sparked rumors that Apple might offer a jet white version of the iPhone. If a shiny white iPhone appeals to you, but the thought of having to buy a brand new phone doesn’t, Totallee has you covered. Actually, they will have your iPhone 7 covered with an ultra slim case that transforms the iPhone into a jet white look without the paying an arm and a leg for it. If this case is anything like Totallee’s other thin cases, the price will be very affordable. Check out their frosted white scarf case which is only $19 to see what I mean. Totallee’s jet white case won’t be available until March, so keep an eye out for it on their site and Amazon.

Filed in categories: Cases and Covers, News

Tagged:

You’ll soon be able to transform your existing iPhone 7 into a jet white version originally appeared on on February 23, 2017 at 10:01 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.