There’s a new Bluetooth product from Chicago – for Shure!

ARTICLE – It’s always fun to be invited to a press introduction of a new product, especially when it is as useful as this: The Shure High-Resolution Bluetooth 5 Earphone Communication Cable—or the Shure RMCE-BT2 cable. Shure wanted a way to allow owners of their detachable SE Sound Isolating Earphones to go wireless without having to shell out for all-new earphones. The RMCE-BT2 is that solution. Since the cables from all of Shure’s earphones are removable, the RMCE-BT2 simply snaps in place making the earphones wireless. 

“Portable listening technology continues to evolve and improve, both from a hardware and software standpoint,” said Sean Sullivan, Senior Manager of Global Product Management at Shure. “The circuitry in the new high-resolution Bluetooth communication cable features premium Bluetooth codec support for higher resolution wireless transfer and a high performance headphone amplifier to accurately and efficiently drive any of our Sound Isolating earphones. Our goal is to provide users with the best possible listening experience, and this product will help achieve that goal.” 

More on the RMCE-BT2 later.

But first, Shure treated invited audio writers to a tour of their facility in Niles—about 20 minutes outside of Chicago. Here we learned about the history of Shure—especially their microphones. I know very little about mics, but I still enjoyed how much pride Shure has in its products, notably the iconic Shure Unidyne microphone—something anyone will recognize (shown below).

Later, we got to experience an anechoic chamber where mics are tested. This is a room that is totally sound-proof with triangular-shaped sound-deadening material covering all surfaces—floor included. Actually, there was no floor; we stood on what looked like chicken wire. Once the doors closed, there was total and unnerving silence. Even when our host spoke, his voice sounded flat and well—dead. 

Now, back to the reason for the trip.

Face it, anyone can build a wireless Bluetooth contraption for any earphones from off-the-shelf parts. Shure doesn’t do that. They design, develop and build everything they sell. They developed their own digital audio converter (DAC) to be used featuring the most popular Bluetooth 5 codecs: Qualcomm aptX audio, aptX HD, aptX Low Latency, AAC, and SBC. Don’t worry if you don’t understand any of this. Just know that the RMCE-BT2 cable will work with your device and deliver the best sound possible.

Back in Chicago at Shure’s downtown offices, we tried out the RMCE-BT2 with the full range of Shure’s earphones, from the affordable SE 215 to (my favorite) the SE 846 earphones. Shure also had some quite nice (and quite expensive) electrostatic earphones, but the audio improvement over the SE 846 wasn’t better enough to justify their higher price. It was the law of diminishing returns regarding audio—the higher the price, the smaller the improvements.

What I discovered was that the RMCE-BT2’s audio quality sounded as good as being hard-wired. At least, I couldn’t discern any noticeable difference. I listened to both Apple Music as well as high-resolution FLAC music files played through the wonderful Onkyo music app on my iPhone—both wired and wireless. The RMCE-BT2 will spoil you. It gave me a freedom that being wired just doesn’t allow. Because the DAC is better quality than what is natively on my iPhone, music was just as much fun to listen to. This was especially noticeable with Amber Rubarth’s binaural recording of “A Kiss to Build a Dream On”—a music test track I use often. The soundstage on this song is incredible—partly because it was a binaural recording—but also because the RMCE-BT2 allowed much of what is good about the song to be heard as intended. I handed the earphones to another attendee who was unfamiliar with the song and when she listened, a wide grin came across her face. That said it all.

Shure uses standard MMCX connectors with the RMCE-BT2. Shure told me they can’t guarantee a good fit with other earphones that use the MMCX connector because they tweaked the connector design for a tighter, more secure fit. However, when I returned home, I tried the RMCE-BT’s connectors with a pair of RHA CL1 ceramic earphones. The fit was perfect. 

The RMCE-BT2 features an in-line remote and mic control. Wireless range is up to 30 feet and battery capacity features up to 10 hours of play time with 350 hours of standby time.

I will give a full review of the RMCE-BT2 High-Resolution Bluetooth 5 Earphone Communication Cable soon. The RMCE-BT2 is available now and sells for $149 US. Visit Shure for more information.

Filed in categories: Articles

Tagged: ,

There’s a new Bluetooth product from Chicago – for Shure! originally appeared on The Gadgeteer on October 27, 2018 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Joe Porletto attends the 2018 New York Comic-Con (Day 2 & 3)


ARTICLE – If you caught day 1 of my adventures at the 2018 New York Comic-Con, we’re back with more video footage from day 2 and 3. Enjoy!

NY Comic-Con Day 2 Welcome

NY Comic-Con Day 2 Autograph Area

NY Comic-Con Day 2 Queue Hall

NY Comic-Con Day 2 Wrap

NY Comic-Con Day 3 Welcome

NY Comic-Con Day 3 Artist Alley

NY Comic-Con Day 3 Cosplay

NY Comic-Con Day 3 Comics

NY Comic-Con Day 3 Wrap

Did you attend this year? If so, what did you think of the show? Be sure and check out my upcoming report on this year’s Comic-Con which is coming soon.

Filed in categories: Articles

Tagged: ,

Joe Porletto attends the 2018 New York Comic-Con (Day 2 & 3) originally appeared on The Gadgeteer on October 7, 2018 at 1:18 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Joe Porletto attends the 2018 New York Comic-Con


ARTICLE – Joe and his videographer/photographer buddy John Battistini are attending the New York Comic Con this week. It’s a mecca for all things nerdy and geeky from comics, to figures, to toys, books, movies, and more. Joe has made a collection of clips for the first day, so enjoy and keep coming back to this post as it will be updated as the show goes on.

Intro to New York Comic Con 2018

XM Studios

Playmobil

Level Up Dice

One61 Studio

HAL 9000

Silly Han Solo bit

New York Comic Con Day 1 END

We’ll update this post with new videos as the show continues. If you have any questions about the show, please leave a comment below.

Filed in categories: Articles

Tagged: ,

Joe Porletto attends the 2018 New York Comic-Con originally appeared on The Gadgeteer on October 5, 2018 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Bowers & Wilkins introduces an improved line of affordable speakers

ARTICLE – In June, I was invited to Boston for a press introduction of the new Bowers & Wilkins 600 Series of speakers. The June weather was unusually cool with nights in the mid-60s—a welcome change from the humid 90s of my home in Central Florida. 

Sight of the famous Boston Massacre

For those who aren’t familiar with B&W, they are a British audio company who specialize in high-end speakers, headphones and AirPlay/Bluetooth speakers. While B&W’s line of headphones has grabbed the most attention, it’s the speakers—the 800, 700 and 600 Series—that really define who B&W are. When a new or upgraded line is introduced, people notice. The newest 600 Series is considered B&W’s more affordable speaker line, but they are definitely not budget speakers.

Upon arriving at the B&W office, our small group of audio tech writers and reporters were treated to a catered lunch before the presentation and listening sessions. Chief Revenue Officer Richard Campbell and Senior Product Manager Andy Kerr introduced the new 600 line by reciting the history of the numbered speaker series. They talked about a commitment to continued innovation evidenced by hiring 40% more engineers and opening a new research facility. Further innovations include upgraded cabinet materials, improved hardware and software and a new European partnership with Philips branded televisions.

Kerr spoke about the new 600 Series benefitting from trickle-down components—utilizing components borrowed from the more expensive 700 and 800 Series—such as a continuum cone midrange driver and decoupled double dome tweeter. “The 600 Series aims to be the best sounding loudspeaker range in its class.” said Kerr. All 600 Series speaker cabinets come in either matte black or satin white.

The tweeter is covered by a steel mesh with an open pattern that allows unrestricted audio while also protecting the tweeter’s delicate diaphragm. The continuum cone speaker replaces the older kevlar design. Kerr explained that the newer speaker is quicker to recover from audio vibrations resulting in more accurate reproduction.The new 600 Series speakers continue B&W’s newer and simpler naming system. The 603 floor standing speaker is the largest of the series. It has the decoupled double dome tweeter, an FST midrange driver using the continuum cone, plus dual paper-cone bass drivers.

The smaller 606 is designed for either stand or bookshelf use. It delivers clarity and tonal purity with a bass extension by combining the decoupled double dome tweeter and the 6.5 in. continuum cone.

The compact bookshelf 607 speaker is the smallest in the 600 Series. It features a rear-firing bass response from its main 5-inch continuum cone mid/bass driver. I was particularly interested in this speaker because it’s the most affordable in the line and I wanted to review a speaker that a “normal” person (non-audiophile) might purchase. It strikes me as a great way to introduce a potential customer to a higher—yet affordable—level of audio. Look for a review soon.

After the presentation, we were escorted into a listening room featuring the previous versions of 600 Series speakers. After speaking a bit, Kerr played an eclectic selection of music. He would carefully explain what to listen for from each piece and note the differences and improvements between the older and newer 600 speakers. Once the music was played, engineers would quickly replace the previous speakers with the newer versions. This was done with each 600 Series model. The music was sourced from a MacBook using an external digital audio converter (DAC).

After hearing both the older and new 600 Series speakers, I could notice a difference. The newer speakers had just a bit of extra clarity. However, to my ears, the difference was subtle at best. If I had heard one speaker on one day and the other on the next day, I doubt I would have been able to tell the difference. That does not say that the new 600 Series isn’t that much better. But it does say that the older 600 Series speakers were that good to begin with and hard to improve upon. Even though the differences were not striking—they were noticeable on some recordings more so than others. Vocals were a bit more intimate or lifelike sounding. Melanie De Blasio’s slow and sultry voice on “With All My Love” became uncomfortably emotional sounding because, with my eyes closed, it sounded like she was in the room playing just for you. John Lee Hooker’s blues/boogie “Send me Your Pillow” had his guitar playing pushed to a volume level matching his vocals. The part in the song where Hooker unexpectedly mutes the strings making his guitar behave more like a percussive instrument raised the hair on my arms. I liked what I was hearing!

After the music presentation ended, we entered a home theater room with movie clips set up to show off the newer 600 Series speakers along with a new HTM6 center channel speaker paired with two B&W subwoofers added for extra bass whoomp. Even watching various movie scenes with all the sound effects going on, the added center channel brought out the vocals quite well. While it was an impressive experience, any improvement in audio quality from the newer 600 Series speakers was lost in the movies’ audio. It was an aural onslaught that drowned out any subtlety that one can appreciate from listening to music in a quiet room. But it still sounded great.

Of course, the term affordable is a subjective one. The new 600 Series speaker have a bit of a price bump from the previous version, but are still the least expensive speakers in B&Ws current lineup. The 607 speakers will sell for $600/pair; the slightly larger 606 will be $800/pair and the floorstanding 603’s will go for a much higher $1,800/pair.  The center channel HTM6 is selling for $599. All prices are US.

Lastly (and just for fun), we were treated to three factory Bowers & Wilkins auto sound systems in a Volvo, McLaren supercar, and BMW.

All were quite impressive, but I think the Volvo was the most successful at visually integrating the speakers into the interior design. They all sounded terrific, but I fear the engine growl from the McLaren would compete with music playing over the B&W—or any other—speakers. The cars were stationary, so we couldn’t test for road noise.

As the day wound down, I got a ride back to the airport. I had prior commitments, so I, unfortunately, missed a seafood dinner that night. 

I’ve reviewed and been impressed with many Bowers and Wilkin’s products, such as the P3, P5, and P7 headphones as well as the Zeppelin Wireless and T7 Bluetooth speakers. I still use and love the P5 Wireless headphone—it’s just a wonderful all-around headphone that delivers great sound and is uber convenient and comfortable. Now that I’ve been introduced to their 600 Series speakers, I’m looking forward to testing them with my home stereo system to hear any improvement I hope they provide. Look for my review soon.

Visit Bowers & Wilkins for more information.

Filed in categories: Articles

Tagged: ,

Bowers & Wilkins introduces an improved line of affordable speakers originally appeared on The Gadgeteer on August 20, 2018 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

New York Comic Con 2017: Get your geek on!

The past weekend, I attended the New York Comic Con (NYCC) held at the Jacob K. Javits Convention Center in New York City. Since 2006, every type of comic, sci-fi, fantasy, gaming, anime, and literary fan can find something to get them excited at NYCC and there are more than enough cool-themed gadgets and tech to put a serious dent in your wallet. 

NYCC attracted over 185,000 fans last year, surpassing the San Diego Comic Con to make it the largest comic book and pop culture gathering in the country.

Fortunately, the convention is held over four days so everyone interested can get a chance to experience it.

Toys and collectibles are a big part of NYCC and there is no shortage of the sought-after Funko Pop! Vinyl figures.

Many vendors sell them, including Toy-R-Us and there are a number of NYCC exclusive figures that fans line up for.

Of course, Comic Con would be nothing without the fans and the most dedicated fans always arrive in costume, “cosplaying” as their favorite characters. Like they say, ‘The family that cosplays together…”

Luckily, for the multitude of cosplayers there are a number of vendors geared specifically toward cosplay accessories, costumes, and repair.

You can show up to Comic Con in your everyday clothes and after a few quick stops at some vendor booths, you’ll be outfitted as any character you can imagine.

Need some Star Wars themed footwear to complete your ensemble? There’s a vendor for that!

Steampunk and Victorian-inspired costumes are also pretty popular and there are plenty of vendors catering specifically to this segment of cosplayers.

Any technology even remotely related to comics will have a presence at NYCC. Wacom uses the convention every year to showcase their latest tablets and touch displays.

The Force is strong at Comic Con and there are endless tie-ins to the galaxy far, far away.

Toymaker Sphero was on hand to show off some new remote control droids for the upcoming release of Star Wars: Episode VIII The Last Jedi.

Sphero also brought along some life-sized droid replicas for display.

You can even bring your love of all things Star Wars to the dinner table with your very own Tie Fighter Portable Gas Grill! Come to the dark side, or maybe it’s the charred side.

No self-respecting Star Wars fan would be complete without a handcrafted, heirloom quality lightsaber from Vader’s Vault. These lightsabers come with a full removable dual-diffused blade that you can actually battle with.

Prop replicas are always very popular and the recreations on display at Comic Con are pretty amazing. The only thing more impressive than the replicas are their staggering price tags.

Each year there are a good amount vendors that showcase some really interesting new items, such as the modular, customized bags from Equilibrium Urban Survival Gear. These bags can be customized endlessly, you can even have your own custom art for the outer panel.

If you don’t mind the lines or the amount of cash you have to lay out, Comic Con is a great place to get a photo or autograph with one of your favorite TV or movie stars. Just be warned, don’t try to snap a picture without their consent!

LEGO is everywhere at Comic Con. You can find figures and kits from the most basic to one-of-a-kind items that are priced in the hundreds.

Scale-models of every type of Star Trek ship and shuttlecraft along with ship placards from vendors like Eaglemoss Collections are always a big hit at NYCC.

Models, in general, are big sellers and if you’re into Gundam or Evangelion figures, there’s plenty here to whet your appetite.

Art is a huge part of Comic Con. Reimagined movie posters, genre mashups, and recreations of famous scenes are all big sellers and some of the original art on sale is astounding.

Young, budding artists can check out their favorite artists and illustrators in Artist Alley, a section of Comic Con where the most talented professionals set up shop. Most of the artists are available for one-of-a-kind commissions and are always happy to give advice to future artists or critique their sketches.

All brands want some type of presence and exposure at NYCC and Chevrolet is no exception. There are always several hero-themed vehicles on display such as this Batman decked out Chevy Tahoe.

The New York Comic Con is always great fun and I guarantee, no matter what your interest is, you’ll find something to geek out over. Check out the NYCC’s website for tickets and info for next year’s Comic Con here.

Filed in categories: Articles

Tagged:

New York Comic Con 2017: Get your geek on! originally appeared on The Gadgeteer on October 12, 2017 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.