DesignSkin The Slider iPhone 7 case review

Cases for smartphones are a constant subject of review here on The Gadgeteer. The latest craze I’ve seen in the case market is adding a place to store a few ID/Credit cards and some cash. The Slider, from DesignSkin, is one such case recently sent to me for testing.

Note: Photos may be tapped or clicked for a larger image.


The case is available for a handful of the most popular smartphones on the market and comes with many different graphic back panels. I requested the “Surprise the Universe” pattern. It arrived very quickly, and fit my iPhone 6s Plus perfectly. The interior of the case and the outer edges are a slightly pliant grey plastic.

There are cutouts in the usual places for camera, flash, ringer silencing switch, speaker, microphones, lightning port and headphone jack.

The volume buttons are covered, but their location is clearly marked on the case exterior. There is a similar denotation of the location of the Sleep/Wake button.

The case wraps around the screen and protrudes slightly – just enough to not actually touch any surface that you may place your phone on face down, but not really enough to protect it should there be sand or anything gritty on that surface. The edges, while not sharp, are not “grippy”, but slightly slippery. Though not as slick as a bare phone, it gives very little grip. The thickness of the plastic around the outside of the phone, however, should truly protect it in case of a drop, but that thickness works against things being connected through the ports. Docks, some headphones, several charging cables, and my DXO One camera are not able to connect well enough to operate normally. (See a dock and the regular Apple leather case versus the Slider in the two photos below.)


The “Slider” feature is just that: the rear panel of the case slides up to reveal a credit-card sized pocket that will hold 2 or 3 cards, depending on the thickness. The thin plastic that covers it shows no signs of being a screen for the wallet, so there is a good bit of stealth in the case as well. If you want to carry your driver’s license, a credit card, and a door access card, I’m sure you’d have no problem with the card being read through the backing. If you need to carry more than that, however, you’ll be out of luck, because there is zero “wiggle room” in the hidden pocket.


The printing on the back of the case is a matte finish and is evenly applied. The graphic actually appears to have depth in, but it’s just an optical illusion. Not sure if the paint will scratch off over time. It has zero scratches from the time I’ve been using it, but I usually don’t keep anything else in my shirt pocket with my phone.


All told, if you’re looking for a soft case with a nice look and a bit of protection that will let you hide a card or 3 inside, this could be your model. At $19.99, it won’t break the bank, even if you decide to get several designs.

Source: The sample for this review was provided by DesignSkin. Please visit Amazon.com to purchase.

 

Product Information

Price: $19.99
Manufacturer: DesignSkin
Retailer: Amazon
Requirements:
  • Device to protect
Pros:
  • Easy to insert phone into or to remove.
  • Allows easy, yet hidden access to cards.
  • Raises screen above tabletop
Cons:
  • Thick edges prevent some cords and accessories from attaching.

Filed in categories: Cases and Covers, iOS, Reviews

Tagged:

DesignSkin The Slider iPhone 7 case review originally appeared on on March 2, 2017 at 11:15 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Gadgeteer team EDC Updates – Andy Jacobs

When Julie asked us to create EDC update posts, I initially thought I’d just include the handful of items that I carry on my person at all times.  But then I thought, “Nah.  Not my style.  My style is to go overboard.”  Thus behold, all of my current EDC items.  Incidentally, the EDC items I carry with my person at all times are of course included—see the very bottom photo.  Enjoy! 

  1. GORUCK GR1 (26L) Rucksack – This is one.  The One Ruck to Rule Them All.  This is the ruck (military term for ‘backpack’) that made me not only convert from messenger bags, but also to swear off all other backpacks.  GORUCK is a company founded by Jason McCarthy, a former Green Beret, and his childhood friend Jack Barley, a talented designer, and the GR1 was their first product.  When I stumbled upon the GORUCK web site several years ago, I was immediately attracted to their rugged yet simple gear style—GORUCK calls it “Baghdad meets NYC.”  The built-in-USA GR1 can swallow up 26 liters of whatever I can throw into it and is easy to pack and unpack with its lay-flat, fully zip-open design.  Its wide, thickly padded straps make it feel amazingly comfortable while wearing it, even when the load is heavy, and I’ve carried heavy in it.  On business trips I’ve carried up to 30lbs in this thing through airports and around cities, and while training for GORUCK Challenges (see below) I’ve carried up to 65lbs in it.  Although I can certainly feel the weight, it is not painful on my shoulders and back.  In addition to some versatile interior organizational features, as a nod to its military pedigree the GR1 includes MOLLE-style webbing inside and out to attach various accessories.  To the side of the GR1, I’ve added an ITS Tactical Skeletonized Water Bottle Holder (see item #3 below) as well as a Condor Tech Sheath to one of the shoulder straps to hold small items that I want to access quickly. Additionally, the GR1 includes a 2-inch by 3-inch Velcro field on the front to allow the user to attach Velcro-backed morale patches to customize your GR1 and make it yours.  Here, I’ve attached the patch that I earned by completing my first GORUCK Tough Challenge, a 10-12 hour, 15-20 mile team-based endurance event led by an active-duty Green Beret that helps forge a group of individuals into a team using Special Forces training principles (yes, I wore this ruck during this event, and many others that followed).  I could go on and on about this ruck, and this company, but suffice it to say that the GR1 has been my favorite ruck/pack/bag for several years running.
  2. Guinness Pint Luggage tag – Guinness Draught Stout is my all-time favorite beverage (well, favorite evening beverage—coffee rules the daytime hours).  This luggage tag was a gift from my generous in-laws who purchased it on a trip to Dublin, Ireland, where they visited St. James’s Gate, toured the Guinness Storehouse and stopped in the 2-story gift shop.  Yes, 2-story gift shop.  I was fortunate to be able to make a pilgrimage there a few years later. Sláinte!
  3. ITS Tactical Skeletonized Bottle Holder – A minimalist, adjustable and nearly indestructible beverage container holder.  Well designed, well built and it attaches to just about anything with MOLLE webbing, including my GORUCK GR1 (#1 above).
  4. Contigo AUTOSEAL West Loop 16oz travel mug – With a durable stainless steel body, THERMALOCK Vacuum Insulation that keeps my coffee piping hot for hours and AUTOSEAL push-button technology that is both leak and spill proof, it’s saved me from massive spills several times.
  5. Stuff sack – I use this to transport my workout clothes: shorts, T-shirt, socks, briefs.  The stuff sack rolls down closed and seals in my sweaty, smelly post-workout clothes, keeping them from contaminating everything else in my ruck.  Each evening when I get home, I just empty the stuff sack into the laundry, then re-fill it with clean workout clothes for the next day and throw it back into my GR1.  Easy peasy.
  6. Lenovo Thinkpad X260 notebook PC w/ power supply – Work-issued laptop.  It’s actually considered an ultra-portable but is kind of a tank.  She ain’t pretty, which is why I’ve added the decals, but she’s durable, and the slim profile and small footprint are great for work travel.
  7. Ray Ban prescription sunglasses with case – Even in Indiana, we occasionally get sunshine.  Gotta have shades.
  8. American Flag-styled handkerchief – Because ‘Merica.
  9. iClever BoostRun BTH07 Sweatproof Bluetooth Sport Headphones – Nice little sport headphones.   I’m currently reviewing these, so stay tuned for a full review.
  10. Pocket-sized Declaration of Independence & Constitution of the United States -These two documents are so foundational to our nation that I think every American ought to a least have a copy of them handy, but even better, to learn their content and what they mean to our rights as citizens.
  11. SlimFold Soft Shell wallet – I’ve been using this wallet non-stop since I reviewed it.  Very thin, small footprint, water doesn’t phase it and it keeps things minimal.  Honorable mention goes to my Bellroy Elements Pocket wallet, which is a close second favorite, and which I bust out when I know I’m going to be doing something very active around water or mud.
  12. Survival Straps GORUCK Tough paracord bracelet – I have several 550 paracord bracelets that I rotate through, some of which I’ve made myself, others I purchased.  This is my favorite at the moment, mainly because it sports the GORUCK Tough logo, which I’ve earned the right to wear, and is, well, black.  And black is cool.
  13. Silicone wedding band – I’m a fairly active guy and my workouts often consists of gripping objects like barbells, dumbells, kettlebells, pull-up bars, sandbags, rocks, logs and other objects that generally tear up my hands—and my wedding band.  I bought this inexpensive silicone wedding band on eBay to try it out, and I really like the look and feel of it.  I may upgrade to a Groove Ring at some point because Groove appears to have built some unique and useful features into their rings.
  14. REI Mini MultiTowel – This little tiny towel has saved me on more than a few occasions, everything from mopping up spills to a quick towel-off after getting caught in a downpour.  It stuffs into its own small mesh carrying case with an attached carabiner for storage which I clip to the MOLLE webbing inside my GR1.
  15. Triple Seven Gear CORE Nano Wallet – This is actually a combo wallet and EDC organizer.  Works well for carrying a few small items and also functions fairly well as an actual wallet, though I don’t use it that way often (see #11 above)
  16. Companion Prayers booklet – A publication of Companions of St. Anthony, this booklet is packed with 40 prayers for many occasions and circumstances.  I use this little booklet quite often.
  17. GORUCK Mini Wire Dopp – (NOTE: This link points to the GORUCK Wire Dopp, which is the larger version of its smaller cousin, the Mini Wire Dopp.  The Mini is currently out of stock.)  Like all GORUCK items, their Mini Wire Dopp is well-designed, built tough (in USA) and looks cool.  It has several mesh zipper pockets inside for organization, a quick-release buckle closure and like most GORUCK gear (including the GR1 ruck above), a Velcro field to affix your favorite morale patch, like my Rebel Alliance symbol patch (if you haven’t yet seen Rogue One: A Star Wars Story, I strongly encourage you to do so).
  18. Moleskine Barnes & Noble Exclusive Limited Edition Star Wars Darth Vader Large Notebook – Pretty much says it all.  If you haven’t guessed by now, I am YUGE Star Wars fan and I use this notebook for journaling.  I am currently using a Pilot G-Tec-C4 in 0.4mm tip pen but I occasionally switch to others (see contents of item #20 below).
  19. Give Us This Day & highlighter – This is a Catholic monthly publication book that contains daily prayers, Mass readings, stories of the saints’ lives and other great spiritual helps.  I use it multiple times per day to guide my prayers, devotions, and reflections.  I also use a highlighter to identify things I want to revisit later.
  20. County Comm Handy Zipper Pouch by Maratac (small size) – Nylon webbing material, YKK zipper and paracord attachment loop.  Simple, well-constructed and handy.  I use the loop to attach it to the MOLLE inside my GR1.
  21. iPhone 6 Plus with Lifeproof Fre Case – My iPhone 6 Plus is one of the items I always have with me (see below).  I’ve tried a lot of different cases, but I like that the Lifeproof Fre case provides quite a bit of protection, including against moisture, and considering how much I sweat during workouts and exercise outside, this case does the job well for me.  It isn’t perfect, but I like it.
  22. The Pocket Gospels and Psalms book – Published by Our Sunday Visitor, it includes the Gospels of Saints Matthew, Mark, Luke and John, plus the Psalms.  Of course it isn’t the entire Bible, but these are some of the best parts.  🙂
  23. Garmin fenix 3 HR multipsport training watch – This was my birthday present from my family last year.  I’ve been a G-Shock devotee for about 20 years, but when my last G-Shock defied efforts to bring it back to life, I started looking into the GPS watches.  The Garmin fenix 3 HR came highly recommended by someone I respect, so I waited a year for the price to come down and this was my birthday present from my family last year.  Great watch.  Probably more watch than I need, but every day I’m glad I bought it.  I might attempt to review it, but I’m not sure I could do it justice.
  24. Leatherman Juice XE6 multi-tool & Leather Sheath – My in-laws gave me this a few years ago as a Christmas gift and it’s one of my favorite gadgets.  It has a lot of tools packed into a small space and is very well constructed.  The Leather Sheath fits it perfectly and I clip it to the MOLLE inside my GR1.
  25. Omega Pacific Standard Locking D Carabiner in Bright color – I typically attach this to the top handle of my GR1.  In my cubicle at work, I have a piece of webbing rigged up where I use this carabiner to hang my GR1.  Omega Pacific makes some of the best climbing carabiners on the market.  I bought this one to use in my first GORUCK Tough Challenge a few years ago.  It’s been through a lot of abuse and it looks the same as when I bought it.

Inside the GORUCK Mini Wire-Dopp:

  1. Micro-fiber cloth – Never know when you might need one of these, what with all the device screens and all.
  2. Paper clips – 2 sizes: small and micro.  Occasionally needed and very handy.
  3. Lexar USB flash drive – Uh, to store files.
  4. GorillaDrive USB flash drive – Also to store files as with #3, but in a nearly indestructible package.
  5. Combo laser-pointer/LED flashlight – Given to me several years ago by a friend who works at GM.  I don’t have occasion to use this much anymore, but it’s very slim and takes up little space, so I keep it in my kit.
  6. Container of Tyleno/Advil with strip of Gorilla Tape – Sometimes life is a headache.  Sometimes I just get a headache.  The strip of Gorilla Tape is for emergencies.
  7. Apple 5W USB Power Adapter – Because my iPhone (and other gadgets) need juice.
  8. Cheap-o car DC power adapter – For travel emergencies.  I don’t need this much anymore, because most vehicles includes some type of charging method for devices.
  9. Rebel Alliance symbol morale path – Bought on eBay.  One of my favorite patches.  Hearkens back to the original Star Wars trilogy as well as the recent Rogue One: A Star Wars Story.
  10. USB to Apple Lightning Adapter – Stubby little flexible adapter that I bought at a CVS pharmacy.  I use this to charge my iPhone from my laptop while sitting in meetings.
  11. TYLT SYNCABLE-DUO Charge and Sync Cable – This cable was half of a set that I reviewed a while back.  My kids confiscated the TYLT ENERGI 2K Travel Charger that came with this cable.  I like the cable a lot because it has both Apple Lightning as well as micro USB which I can use to charge the iClever headphones and other devices that require micro USB.
  12. Moleskine Volante XS notebook – For emergency note jotting.  This, along with my Fisher Space Bullet Pen (see below) saved me once during an airport travel emergency when I needed to jot a ton of info very quickly.  Super handy little notebooks.

Inside the County Comm Handy Zipper Pouch by Maratac (small size):

  1. Titanium spork – Bought on eBay.
  2. Pilot Precise V5 Rolling Ball pen, Extra Fine Tip, Black — The narrower the lines, the better.
  3. Sharpie Fine/Ultra Fin Tip, Black – Versatile with 2 tip widths.
  4. Ruler – Thin and flexible.  I actually use this fairly often.
  5. Bic Matic Grip 0.5mm Mechanical Pencil – I’ve been a fan of mechanical pencils since 5th grade.  This is kind of a cheapie, but works great.
  6. Sharpie, Fine Point, Red
  7. Sharpie, Fine Point, Blue
  8. Highlighter, Green – For highlighting journal articles and other documents.
  9. Gel Pen, Red – For redlining documents both at work and at home.
  10. Parker Jotter, Medium Tip – The classic.  Stainless steel, smooth ink flow.  One of my favorite non-gel pens.

Inside the Triple Seven CORE Nano Wallet

  1. PlusUs LifeCard Powerbank – This little battery doesn’t provide a whole lot of juice, but in a pinch it will (and has) saved me.
  2. Micro-fiber cloth – Yes, I know I have another one of these tucked in my GORUCK Mini Wire Dopp (see above).  I don’t need them both, so I’ll eventually get rid of one.
  3. Band-Aids (3) – Because I have kids and sometimes they get boo-boos.  Or I do.
  4. Lumintop Tool AAA flashlight – Best small EDC flashlight I’ve ever used.  Tough, water-resistant, multiple brightness settings and a “clicky” button.  A great value.
  5. Fisher Chrome Bullet Space Pen – Best EDC pen, period.  But I lost my pocket clip and it’s much more useful with a clip.
  6. Leatherman Squirt PS4 multitool – Best small EDC multitool, far as I’m concerned.  One of the only ones I could find with both pliers and scissors.  Lots of tools packed into this guy.  Black.  Of course.

As promised above, this is the “On Me At All Times” Items list – Some additional detail on the items that I am either wearing or have in my pocket at all times.  Explanations for each item are above.

  1. Silicon wedding band
  2. Survival Straps GORUCK Tough paracord bracelet
  3. Garmin fenix 3 HR watch
  4. SlimFold Soft Shell wallet
  5. iPhone 6Plus in Lifeproof case

Filed in categories: Articles

Tagged: ,

Gadgeteer team EDC Updates – Andy Jacobs originally appeared on on March 2, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Wallets with an eject lever, a fidget toy from the moon, a toolbox for your pocket and more – Notable crowdfunding campaigns

This week I’m bringing you info about five Kickstarter crowdfunding campaigns that I think you might like to read about because they all look like products that I’d buy and use myself. Click through to see this week’s collection of notable crowdfunding campaigns.

Fantom Wallet – The Quick Access Slim Wallet

What is it?
The Fantom is a minimalist wallet that will be available in either aluminum or carbon fiber. It has been designed to hold standard sized plastic credit cards and will come in three versions that can hold up to 4-7, 6-10 or 8-13 cards each depending on if the cards are embossed or smooth.

The Fantom is RFID blocking and features an ultra cool eject lever on the side that lifts and fans the cards for easy viewing and retrieval.

There will even be versions with a built-in coin slot that can hold coins, keys, micro SD cards, etc.

Why do I like it?
I like the Fantom Wallet because it’s slim and it has that cool card eject feature. Some minimalist wallets that are on the market look very cool but end up being a pain in the you-know-what to use because it is too difficult to remove and reinsert cards. The Fantom does not have that problem and is very easy to use. I know because they sent me a pre-production version of the Fantom 10 to try out. It can hold 4 smooth cards and 4 embossed cards perfectly.

I’m not a huge fan of the attached money clip, but that’s because I rarely use cash these days and it adds some bulk to the wallet. It can be removed though if you have an Allen wrench.

This is one that I look forward to checking out when they have production versions of the wallet available this fall.

Where can I find more info?
With 31 days left in their campaign, The Fantom Wallet campaign has already met their funding goal of $4,504. You can pre-order a Fantom Wallet starting at $49. After the Fantom Wallet campaign ends, rewards are estimated to start shipping in October 2017. Visit their Kickstarter page for all the details.

FLATPAC: Just Pack & Unpack In A Second

What is it?
The FLATPAC is a lightweight bag that can be carried as a messenger bag, over the shoulder bag or a backpack. It features a unique zippered drawstring design with interior pockets that let you easily separate your gear.

Why do I like it?
I like the FLATPAC because you can just throw all your stuff in the center of the pad, zip it up, pull the drawstrings, and go. But if you like to be a little more organized, you can put items in the eight small pockets and very large items in the one full-sized pocket.

Where can I find more info?
With 24 days left in their campaign, The FLATPAC campaign has already met their funding goal of $4,500. You can pre-order a FLATPAC starting at $23. After the FLATPAC campaign ends, rewards are estimated to start shipping in June 2017. Visit their Kickstarter page for all the details.

MOONDROP- Fidget desk toy displaying gravity on the MOON

What is it?
The MOONDROP is a fidget toy that simulates gravity on the earth, Mars or the moon.

Why do I like it?
I like the MOONDROP because… well just look at it. Who wouldn’t like it? First of all, it looks cool, and secondly, magnets! If you are a fan of The Gadgeteer, you know that I love magnets. I also like that the MOONDROP is pocket sized, but you can add the desktop stand so you can easily display it. I would be careful leaving it on your desk at work though as someone is bound to “borrow” it forever.

The MOONDROP is made of Aerospace grade Aluminium and comes with a slider that is made of the same material or of copper depending on the model you choose. Inside the MOONDROP are neodymium magnets which interact with slider to create the gravity-defying effect.

Where can I find more info?
With 28 days left in their campaign, The MOONDROP campaign has already met their funding goal of $6,141. You can pre-order a MOONDROP starting at $24. After the MOONDROP campaign ends, rewards are estimated to start shipping in June 2017. Visit their Kickstarter page for all the details.

Bit Bar : The Pocket Friendly EDC Screwdriver

What is it?
The Bit Bar is a small screwdriver and hex bit holder made of fiberglass reinforced nylon or Grade 5 Titanium that’s pocket-friendly and TSA compliant. The Bit Bar looks like a 1/4 hex bit holder that can hold up to 8 standard bits (8 black oxide bits are included), but it also turns into a full-length grip.

Why do I like it?
I like the Bit Bar because it has a clip and the perfect shape for easy pocket carry, gear bag carry or glove box storage. The Bit Bar also comes with a leather case and a 60mm extension that lets you get into tighter spaces.

Big Idea Design knows there stuff. I’ve reviewed two of their pens including my current daily favorite the Big Idea Design Ti Arto pen. I have no problem recommending their campaigns because I know they deliver exactly what they promise.

Where can I find more info?
With 47 days left in their campaign, The Bit Bar campaign has already met their funding goal of $10,000. You can pre-order a Bit Bar starting at $55. After the Bit Bar campaign ends, rewards are estimated to start shipping in August 2017. Visit their Kickstarter page for all the details.

Delphin: World’s Smallest Underwater Wearable

What is it?
The Delphin is a small waterproof Android device that has Bluetooth, WiFi, Spotify, Pandora, Audible, Netflix, Google Music and other apps. It also has external buttons for navigating playlists.

Why do I like it?
I like the Delphin because it reminds me of Apple’s iPod Nano – the gen 6 model. Of course, the Delphin is infinitely more powerful than the nano. It’s basically an Android smartwatch without the watch band. But the Delphin is waterproof (use up to 10 feet underwater) and has been designed for swimmers. It will even come with waterproof headphones.

Where can I find more info?
With 28 days left in their campaign, The Delphin campaign still has a climb to make before reaching their funding goal of $50,000. You can pre-order a Delphin starting at $180. After the Delphin campaign ends, rewards are estimated to start shipping in August 2017. Visit their Kickstarter page for all the details.

Filed in categories: News

Tagged:

Wallets with an eject lever, a fidget toy from the moon, a toolbox for your pocket and more – Notable crowdfunding campaigns originally appeared on on March 2, 2017 at 7:20 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

PITAKA carbon fiber magnetic wallet review

Have you been shopping for a new minimalistic wallet but don’t want one with the same old tired style as everyone else’s minimal wallet? Then look no further my friends because I have a wallet that you’ll want to check out. It’s the PITAKA carbon fiber magnetic wallet and it’s definitely unique. But is it the perfect minimalist wallet? Let’s find out.

What is it?

The PITAKA carbon fiber magnetic wallet is a minimal wallet that’s made of carbon fiber, which is RFID blocking. It also features a modular layered design that allows you to customize what it can hold.

Design and features

The PITAKA wallet resembles a deck of playing cards in shape, size and even with the layered “card” design.

Made of carbon fiber, the wallet is lightweight but tough.

The main wallet ships with four layers that include the top and bottom layer end pieces that can hold one card each and two internal layers that each hold two cards. That means that the wallet can hold a maximum of six cards.

PITAKA also sells additional layers that can hold coins, a key, SIM card, micro SD cards, and cash.

There are three magnets embedded in each layer. The larger magnet in the center bottom edge and two smaller magnets on the side edges. The location of the magnets allows for the card fanning effect that you can do with one hand (see video demonstration below).


Each internal PITAKA layer can hold two standard-sized embossed or non-embossed plastic credit cards.

The cards are held in place with very small tabs that you can barely make out in the image above. Look on the straight rails across from the nose in the face cutouts and you will notice that the plastic has a slightly wider section.

See it in action

As you can see in the video above, you just hold the wallet in your hand and fan the “deck” with your thumb which is also used to raise the card. Although I didn’t do a very good job in the video, with a little practice, you can use this wallet with just one hand.

There are two issues/problems with this wallet that that should be discussed.

First of all, you need to pay attention to the orientation of the wallet, If you hold it in your hand so that the larger center magnet is on top, spreading open the wallet will either cause the wallet to fan open upside down or even worse, will cause the magnetic layers to disconnect. I show this towards the end of the video at the 36 second mark. I really think there some be a visual or tactile indicator of how to hold the wallet.

The bigger issue with the PITAKA wallet is not how to hold it, but what types of cards it can hold. The box that the PITAKA is packaged in has a warning (click the image for larger view). Basically, it says that you should not use cards with magnetic strips in this wallet. Why? Because the PITAKA wallet uses magnets to hold the wallet’s layers together and those magnets can demagnetize the cards. I contacted PITAKA to get some clarification on this issue and this is their reply:

Great to receive your email and reply you on demagnetize issue.

Since there are magnets on our carbon fiber wallet, they are enabled with one-hand cool operation, meanwhile bringing another issue of demagnetizing
card with a magnetic strip. But that could be fewer and fewer situations as the RFID chip cards (credit cards, metro cards…) are reported to be the trend.
Most European countries have been used RFID credit cards everywhere and Americans have been on the way. Below are a tech news FYI.
https://www.nfcworld.com/2016/06/23/345759/emv-claims-third-global-card-present-payments/

Also we surely understand it’s still a great trouble if demagnetizes. We tried so much find magnets won’t demagnetize and checked with many material experts, all told us no such magnets exist. If you know some please do inform us for research and resolution. But kindly noted Chip technology is an advanced, and it is more safe than stripe.
As an innovation company, it’s impossible to develop a product that will be conflicted with the trend and technology.

The problem is that my main CitiBank Visa credit card has both a magnetic strip and a chip. I still find stores where I have to swipe instead of use the chip. So that’s a big problem for me and I’m guessing will be an issue for others as well.

Final thoughts

The PITAKA carbon fiber magnetic wallet is a wallet that has a lot going for it. It’s lightweight, has RFID protection, can be customized to add or remove layers and is fun to use. But the main problem with it is the potential to demagnetize cards with magnetic strips. If you don’t use those types of cards anymore, then yay for you! I think you’ll enjoy this unique wallet. But if you use cards with magnetic strips, I don’t think this is the wallet for you.

Source: The sample for this review was provided by Pitaka. Please visit their site for more info and to order one.

 

Product Information

Price: $80
Manufacturer: Pitaka
Pros:
  • RFID blocking
  • Modular
  • Lightweight
  • One handed access to cards
Cons:
  • If you don't pay attention to the orientation of the wallet, you might disconnect the layers when fanning the "deck"
  • Can't use with cards that have a magnetic strip

Filed in categories: Reviews, Wallets

Tagged:

PITAKA carbon fiber magnetic wallet review originally appeared on on March 1, 2017 at 1:22 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Reverb lets Amazon’s Alexa live inside your Mac, iOS and Android devices

Now you can use Amazon’s Alexa virtually anywhere you want using Reverb, the new free app from Rain Labs. The app connects to Amazon Echo services and allows you to use Alexa through your Mac, desktop, IOS and Android phones or tablets. And you don’t need to be connected to wifi to use it.

When you open the app on your chosen device you’re prompted to sign into your Amazon account. Now you’re ready to use Alexa. The familiar blue Alexa ring appears on the screen, you activate Alexa by clicking the ring with your mouse or holding your finger on it and giving a command. It’s that easy. You can also access Reverb directly from your favorite browser. 

The new version of the Reverb app uses Alexa v2, which gives you access to news flashes, timers, weather, alarms and more. It also enables Smart Home Skills so you can control your Alexa compatible smart devices. Unfortunately, the one key feature you can’t access is playing music, due to Amazon’s restrictions placed on using their music service on apps.

Reverb even allows you to use your installed Alexa skills. So you can say “Alexa play ocean sounds”, “Alexa play Jeopardy ” or my personal favorite “Alexa order a pizza from Dominos”.

Possibly the best thing about having the app on your phone, tablet or computer is you won’t have to buy multiple Echo devices for each room in your home or office – And it’s FREE.

Reverb, from Rain Labs is available for download now for Mac at the Mac App Store, for iPhone and iPad at the iOS App Store, and for Android at the Google Play Store.

Filed in categories: Android, iOS, News

Tagged:

Reverb lets Amazon’s Alexa live inside your Mac, iOS and Android devices originally appeared on on March 1, 2017 at 11:37 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.