Safely open packages and envelopes with the Nimble cutter

I used to use a pair of scissors to open boxes, until the day I almost literally cut the pad of one of my fingers off.  I switched to using a box cutter, but I’m still worried about cutting myself with that, too.  With the Nimble One-Finger Safety Cutter, I could rip into boxes and packages and cut through up to three pieces of paper at once. – and I wouldn’t have to worry about cutting myself because the ceramic blade won’t cut into skin.

It’s made of silicone rubber, ABS plastic, and a zirconia ceramic blade.  The silicone sleeve is yellow to make it easy to find in a drawer.  To cut, slip the Nimble on your fingertip, hold your finger at a 45-degree angle, and “draw a line” to cut.  When cutting through papers, you’ll want to have a cutting surface on your work table.

Since you don’t have to grip like you do with scissors, the Nimble is especially good for people with dexterity problems.  The Nimble One-Finger Safety Cutter is $10 at The Grommet.

WOWSTICK 1fs Electric Screwdriver review

Now here’s a clever tool for the handyperson in your life: An electric screwdriver but for teeny tiny things. Meet the WOWSTICK 1fs electric screwdriver.

  • Wowstick 1FS Screwdriver Set 18pcs Bits
  • Powered by 2 x AAA batteries (NOT included)
  • LED Light
  • Speed: 150r/min (non-adjustable)
  • Material: Aluminum
  • Dimension: 170 x 16 x 16mm
  • 1 x WOWSTICK 1fs Electric Screwdriver
  • 18 x Bits
  • 1 x Carry Case

By itself without batteries, the screwdriver body weighs just under 2 ounces.

Here’s a closeup of the specs from the paper insert.

A size comparison next to a pen and a large marker.

The screwdriver accepts two AAA batteries (not included). The rear end of the handle unscrews.

You also get three tubes worth of 4mm bits.  I couldn’t identify them all visually (some are really tiny).

Fortunately, the Brando web page listing shows all of the included bits, spelled out.

It wasn’t obvious at first, but once you squeeze the black trigger to turn the bits in either direction (it looks like one long black button, but it’s actually a forward/reverse depending on where you press it), an LED light illuminates your work area.

The big question is: How well does it work?  I found that under moderate torque, the screwdriver seems to struggle a little bit and the LED light dims considerably.  Then again, the inclusion of all the extremely tiny bits tells me this was really intended for very, very small screws where torque may not be as much as found in this fairly ordinary light switch test.

Another interesting design choice: You must remove the bit from the screwdriver if you plan to use the included carrying case. It simply will not fit.

If you do normal handyman things around the house, you may want to reach for a slightly meatier electric screwdriver with more power. For lighter-duty tasks, the WOWSTICK 1fs could be a handy featherweight tool for very small screws if you’re doing a lot of repetitive work.

Source: The sample for this review was provided by Brando. Please visit for more info.

 

Product Information

Price: $62
Manufacturer: WOWSTICK
Retailer: Brando
Requirements:
  • Two AAA batteries (not included). Works with 4mm bits (included).
Pros:
  • Lightweight, comes with many tiny bits
Cons:
  • Not designed for tougher screws (not a lot of torque.) LED light seems to dim at the slightest hint of resistance. No variable speed.

Filed in categories: Reviews

Tagged:

WOWSTICK 1fs Electric Screwdriver review originally appeared on The Gadgeteer on December 6, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

MyAntenna P1 Laser Distance Meter review

When I was growing up and helping my dad with building projects, he would always remind me, “Measure twice, and cut once.” There were many times my reply was “Dad, I cut this board twice and it’s STILL too short!” I’m sure he would have heard that less often if I had a MyAntenna Laser distance meter. 

There are plenty of laser distance measurement tools available, ranging in price from about $20 to hundreds. I’ve used several over the years and they all worked about the same – turn it on, put the end starting where you want to measure and put the laser dot on the other end you are trying to measure, read the display, and done.  Not having to physically move to the other end in some situations can be a lifesaver.

A few years ago, I borrowed a laser distance meter to measure my house for siding. Not needing to pull out a ladder to measure from the ground to the bottom of the soffits was indispensable. If I were to pull out ladders, measuring tapes and get help reading the distance, or give instructions to my non-technical family, the job would have taken considerably longer and would probably have resulted in an argument (only joking, Sweetheart). With a laser distance meter, I could do the job myself.

MyAntenna’s P1 debuted on Kickstarter. I was one of the investors and appreciated the opportunity to review this product. Opening the simple, Apple-esque, white box, the P1 was nested in comfy form-fitting foam. The bright green casing should make it easy to locate on a cluttered job site or in a drawer surrounded by safety pins, screwdrivers and packing tape.  It measures about 4 x 1-1/4 x 5/8 inches, considerably smaller than any similar products I’ve used.  The batteries were not included, apparently due to some shipping restrictions.

After loading it with two AAA batteries, a long touch of the solitary button turned it on and it within two seconds it was making measurements. While taking measurements, the P1 beeps about once a second. It defaults to Metric units and is accurate to 1mm. When turned on, another quick touch of the button turns off the laser and locks the current value on the screen – very handy when measuring something when the display can’t be viewed, Yes, I measured my own height using this feature and, dang, I am so short.  Measurements are from the tail-end of the tool (it automatically adds the length of the tool to the measurement).  Very short measurements, less than about 6 inches or 15cm (or .16ft,  50mm, with the mirror attached) will result in an “Er261.” There a few other errors called out in the instruction manual, such as over temperature and weak signal, but I did not encounter any of these during testing. The P1 also turns the laser off after 90 seconds and the tool off after two minutes.

The display is bright white on a black background and easy to read. In addition to the distance measurements, there is a battery strength indicator and red dot indicating the laser is on.

A really useful feature is “Quick Touch.” When the unit is on, a double click of the button starts a ten-second countdown before measurement starts. This allows a user to position the P1, then move to the destination position, perhaps to position an object for the laser to target. A beep once a second is followed by rapid beeps signaling the final three seconds, the measurement is completed and is latched on the display. Very handy!

For those in countries using Imperial measurements, a triple click of the button toggles measurements from meters to feet, but take note, measurements are in feet and 1/1000th inch – the meter does not display fractions. In other words, six inches is displayed as 0.500 feet.  I would have liked it if the P1 remembered that I use Imperial measurements, but after turning the unit off, it defaults to metric measurements again.

To make things even more convenient, MyAntenna includes a magnetic mirror that attaches to the body of the P1 and allows measurements at 90°. I found this tool to be particularly useful when measuring from one wall to another or from the top of a wall-mounted television to the floor. I found this tool to be particularly useful when measuring from one wall to another or from the top of a wall-mounted television to the floor. The tool “knows” when the magnetic angled mirror is attached and changes the measurement zero point from the back of the meter to the bottom of the meter. Pretty slick!

The MyAntenna P1 is reasonably priced, sturdy, accurate, fun and easy to use. I appreciated that it uses common batteries with its compact size and it’s already replaced the measuring tape in my tool pack. Besides being really handy, when it isn’t measuring something, my cat loves to chase that little red dot around!

Source: The sample for this review was provided by MyAntenna. Please visit their Indiegogo campaign page for more info.

 

Product Information

Price: $49.00
Manufacturer: MyAntenna
Pros:
  • Compact size
  • Easy to use
  • Common batteries
  • Inexpensive
Cons:
  • Always defaults to metric measurements after a power cycle. To be fair, this might be a pro if you live in a Metric country 🙂

Filed in categories: Reviews

Tagged: ,

MyAntenna P1 Laser Distance Meter review originally appeared on The Gadgeteer on October 2, 2017 at 4:12 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Bit Bar is the “Pocket Friendly EDC Screwdriver”

I’m a big fan of space-saving EDC tools, and if you are too, have a look at the Bit Bar from BIGiDESIGN, maker of lots of cool and useful EDC items. The Bit Bar is essentially a slim, compact screwdriver that carries its own bits in a spring-loaded, magnetic rack inside it. Just push on the bottom of the rack with your thumb and you have access to all of the bits. Then, just insert one into the end of the Bit Bar and you are in business. It also includes a keyring slot, a pocket clip and the center can be used as a bottle-opener. Available in glass-reinforced nylon ($75) and two colors of Grade 5 titanium ($120 each), the Bit Bar is a bit pricey, but for anyone who uses a screwdriver frequently but wants a slim design, check out the Bit Bar. Visit BIGiDESIGN for more info or to order.

Filed in categories: News

Tagged: ,

Bit Bar is the “Pocket Friendly EDC Screwdriver” originally appeared on The Gadgeteer on September 26, 2017 at 6:56 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Tacklife AGK31AC Classic 6.3-Amp angle grinder review

My angle grinder was stolen from my garage (it was a condo, shared space) along with some other tools. Now that I have my own garage, I had a chance to try out the Tacklife AGK31AC 6.3-amp angle grinder to see if it would make a worthy replacement.

Specifications:

Amps: 6.3 amps
Rating: 120 volts AC
No-load speed: 11,000 rpm
Grinding wheel:4-1/2 inches(115mm)
Cutoff wheel: 4-1/2 inches(115mm)
Flap Disc: 4-1/2 inches(115mm)
Wire cup brush: 3 inches(75mm)
Spindle thread: 5/8-inch-11

Package Contents:

1 * Tacklife AGK31AC Angle Grinder
1 * Cutting Wheel
1 * Grinding Wheel
1 * Flap Disc
2 * Extra Carbon Brushes
1 * Auxiliary handle
1 * Protect guard
1 * Spanner wrench for replacing
1 * User Manual
1 * Warranty Card

It was good to see that three 4-1/2 discs were included: a cutting wheel, grinding wheel and a flap disc.

In addition to a manual, a spare set of carbon brushes were included.  I wasn’t expecting that at all.

The grinder comes out of the box like this, without the grip, disc or safety shield attached. Closeup of the label. There are two removable “cooling vents” (one on each side). If you’ve ever worked in a dusty workshop, this is a nice touch. There’s a push button lock on the top side (left photo) that makes installing the wheel easier, especially when tightening with the included spanner wrench (right).

The orange power switch is located on the left side of the handle (note if you’re a lefty).

I happen to be retrofitting my son’s summer camp go-kart with electric motors, so I thought I’d use the grinder to shorten a long bolt.  No problems with the cutting wheel.

An angle grinder isn’t something I use all the time, so the Tacklife AGK31AC angle grinder is priced just right for me. Nothing fancy, and comes with everything you need to get started.

Source: The sample for this review was provided by Tacklife. Please visit their site for more info and Amazon to order one.

 

Product Information

Price: $32.97 (at time of writing)
Manufacturer: Tacklife Tools
Retailer: Amazon
Requirements:
  • 4-1/2 inch wheels (3 included), 120VAC
Pros:
  • Comes with everything you need to get started. Inexpensive
Cons:
  • Not for those who are into brand names.

Filed in categories: Reviews

Tagged:

Tacklife AGK31AC Classic 6.3-Amp angle grinder review originally appeared on The Gadgeteer on September 14, 2017 at 12:25 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.