PhotoFast Call Recorder review

For years, we have had the ability to record analog phone conversations with little effort. Suction-cup mics, dual-socketed wires that sent the audio to tape or another listener, or even build-in features of corporate phone systems have been around for 30, 40, 50 years or more. But now we have digital cell phones, and end-to-end encryption that blocks or severely limits this ability. What can we do? The folks at PhotoFast have solved this for iPhone users, through a plug-in device called the Call Recorder. (Yeah, catchy name, but accurate, amirite?) They sent me one to test.

Note: Photos may be tapped or clicked for a larger image.

The unit arrived in a hanging package that would feel right at home in an Apple Store beside all the other cases and add-ons. Inside is an EarPod case-sized square box in White with a clear cover. Inside that is an oval tube about the width of the iPhone SE (actual measurements are 2.125″ x 1.25″ x .375″), with a Lightning connector sticking out of the top center of one edge. One one side, there are buttons for play/pause and record, plus volume adjustment. On the lower left edge, there is a .125″ earbud jack. On the back, opposite the jack is a slot for a microSD card. You can record directly to your iPhone’s internal memory, or onto the onboard storage of a card inserted into this slot.


When the phone is unlocked and you first insert the Call Recorder into the Lightning port, the firmware in the device sends a link to the free app on the App Store for you to download.

Once you install this, it will launch automatically when you insert the device. If you just tap to launch the software, there is an automatic check to make sure you have connected the Call Recorder, and that there is an approved headphone connected to the recorder. If you’ve not done this, you will get an error message.


I found this to be a little irritating since many perfectly good earbuds were rejected by this test. Reseating them and jiggling them in the socket did nothing to make them be acceptable. If they were rejected, they would never work.
I tested the Call Recorder by placing a call to my mother. I got her, but the call recorder did not record my side of the message, and she could not hear me while the recorder was attached. Then I called my wife’s phone since she was working out in the yard. Both sides of the conversation were recorded, but since her phone was close by, I think the ringing and some of the other noises associated with me juggling two phones may have interfered with getting a good recording and getting some static.

I was finally able to perfect the task of having the software up, dialing a number, and getting both parties recorded onto my phone. Even after getting good connections, there were still issues at times. I called Mom earlier today through the Call Recorder app and was immediately told she heard an echo, so we hung up. I called back through the regular phone app, with identical results. Only when I removed the device from my phone could she not hear an echo. (My mom is not very technical, being a member of the “Greatest Generation”, so explaining to her about testing a call recorder produced, I’m sure, a glazed-eyed look, and her response of “Oh, OK” revealed her amusement that I’m always playing with “some new toy.”)

Once recordings are made, they are listed in the log by date and time, but renaming to something a little more helpful is easy, as is moving them to or from the external memory, or to a connected account.


This last bit is probably the most beneficial feature of the package. The free PhotoFast ONE app offers a wealth of features for transferring all manner of files to and from your iPhone and devices that can read microSD cards. It can also transfer directly to some services (iCloud, Google Drive, and DropBox), it can gather and .zip or unzip files before and after transfer, and open photos, videos, and .mp3 files natively. (Unfortunately, the renaming is not transferred to the actual file, so when it’s moved over to, say, Dropbox, the original filename is again seen. I recommend listening on the final platform and renaming there to make sure you’re changing the correct file to a name you want.)

I rarely have cause to record both sides of a conversation. If you need calls recorded, there are many apps and utilities out there, many easier to setup and deal with than the Call Recorder. But if you’re needing to move files to and from iOS devices, you’ll find few cheaper alternatives than the free PhotoFast ONE app or the Call Recorder and a microSD card reader.

Source: The sample for this review was provided by PhotoFast. Please visit their site for more info and order through the Indiegogo Marketplace.

 

Product Information

Price: $125.00
Manufacturer: PhotoFast
Retailer: IndieGoGo
Requirements:
  • iOS device with phone capabilities
Pros:
  • Single piece with no battery – powered form phone
  • Launches free software on attachment
  • Software offers many options
Cons:
  • Not all headphones/earbuds are compatible
  • Attachment/Recording is intermittent
  • Small buttons on unit

Filed in categories: Reviews

Tagged:

PhotoFast Call Recorder review originally appeared on The Gadgeteer on September 25, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

WaterField’s new iPhone camera bag holds all your iphonography gear

If you love using your smartphone as your primary camera, then you will appreciate the new iPhone Camera Bag from WaterField Designs of San Francisco California. This small shoulder bag will hold all your small clip-on lenses, cables, and other accessories that you need when you’re shooting on the go and don’t want to stuff your pockets with gear.

Available in black ballistic nylon for $99 or premium leather for $129, this small zippered bag features an over the shoulder or around the waist design with a customizable padded interior.

There are even straps on the bottom that can be used to hold a small tripod.

The iPhone Camera bag (you can use it with other phones too, I won’t tell) is available for order now with shipping on 9/27. Visit sfbags.com for all the details.

Filed in categories: News

Tagged: ,

WaterField’s new iPhone camera bag holds all your iphonography gear originally appeared on The Gadgeteer on September 16, 2017 at 10:28 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Prynt Pocket iPhone photo printer and camera grip review

If you own a smartphone, I am willing to bet that you have more than a few images on your phone. Except for a Canon 70D DSLR that I use to take most of my product review shots, I use my iPhone 7 Plus to take all my personal shots. 90% of those images stay on the phone and don’t get shared which is kind of sad. Remember the Polaroid cameras from decades ago that had a built-in printer that printed and spit out the picture as soon as you snapped them? The Prynt Pocket iPhone photo printer reminds me of a smaller version of that product. 

What is it?

The Prynt Pocket is a photo printer and camera grip made especially for the Apple iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 5s, and iPhone 5.

What’s in the box?

Prynt Pocket grip/printer
Zink paper pack with 10 sheets
MicroUSB cable
Quick start guide

Design and features

The Prynt Pocket is a more compact version of the Prynt Case which Elizabeth reviewed earlier this year. It is available in several colors including the black version that was sent to me. It’s made of plastic with a textured grippy covering.

One side of the Prynt Pocket has a molded grip with a lanyard loop on the edge.

The bottom of the Prynt Pocket has the slot where the printed image comes out, a micro USB charging port and a charging status LED.

The top of the Prynt has an expandable slot with a lightning connector that can accommodate different sized iPhones.

Depending on the iPhone model, it may or may not be able to fit in the Prynt slot with a case. My iPhone 7 Plus would only fit with a very thin case like the Totallee thin leather case. Other cases I tried made the phone too wide for the slot.

The Prynt Pocket doesn’t use ink to print pictures, it uses special Zink thermal printer paper. It’s exactly the same type of sticker paper used with the Polaroid Zip printer. At least I thought it was the same.

The Zink paper comes in packs of 10 sheets. The pack with the special blue top sheet loads into the Prynt paper cartridge.

The Prynt Pocket comes with one pack of 10 sheets. I was also sent a box of 40 sheets with my review sample. Instead of opening the extra box after I had used the first 10 sheets, I pulled out an old package of Zink paper that I use with my Polaroid Zip printer. Although the paper looks and feels identical, right down to the blue top sheet which is used to tell the printer the type of paper, the old pack wouldn’t load into the Prynt Pocket. It was very slightly too wide. Grrrrr…

After you have the right paper loaded into the cartridge, the cartridge slides into the slot on the top of the Prynt Pocket.

Unfortunately, that’s as far as the cartridge can be inserted. A little less than half of it remains sticking out of the Prynt. This isn’t a huge problem if all you plan to do with the Prynt Pocket is print pictures that you’ve already snapped. But if you want to use the Prynt Pocket as a camera grip, it makes the whole setup feel pretty awkward.

Even if the cartridge wasn’t sticking out the top of the module, the grip is still awkward to hold and use. The shutter button is too close to the edge of the grip and needs to be more centered.

Let’s print some pictures

To print pictures with the Prynt Pocket, you will need to install the iOS Prynt app on your iPhone. You’ll also need to create an account to use the printer which is annoying.

 



But once the app is installed, you’ve created an account and are logged in, the rest is pretty easy. You can choose to print images in your existing library or take a new image.


The app has some basic photo editing capabilities including cropping, enhancing, and even adding some text.


Another fun feature is the ability to record a video that will play when you view the image through the Prynt app. Think of it like live images or Harry Potter style images.

After you’ve chosen a picture to print, you just press the print button and in a few seconds, you’ll have your printed picture.

The image comes out of the Prynt completely dry since actual ink isn’t used.

The quality of the images is about the same as other Zink printers that I’ve used. The colors are a bit washed out with a yellowish or greenish cast to them.

The best part about the images is that the paper is peel and stick. This makes it easy to stick the pictures in your journals, which has been my main use for them. Even if they aren’t the best quality prints, they are more than adequate to make me relive the memory of when I took them.

Final thoughts

At $149.99 for the Prynt Pocket and the relatively high cost (.50 cents) for each print, the Prynt Pocket isn’t very economical compared to other Zink printers like the one I mentioned earlier in the review. That said, the Prynt Pocket is fun to use and it’s really handy for people who like to journal like me. If you are shopping for a photo printer that’s plug and play and has a built in camera grip, this is the one to get.

Source: The sample for this review was provided by Prynt. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $149.99
Manufacturer: Prynt
Retailer: Amazon
Pros:
  • Easy to use
  • No Bluetooth pairing required
Cons:
  • Can't use other versions of Zink paper with this printer
  • Grip is awkward
  • Expensive

Filed in categories: Reviews

Tagged: , ,

Prynt Pocket iPhone photo printer and camera grip review originally appeared on The Gadgeteer on September 11, 2017 at 12:44 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Sandisk’s iXpand Base charges and backups your iPhone’s data

With up to 256GB of storage, the Sandisk iXpand Base has been designed for iPhone and iPad users to backup the device’s images, videos, and contacts every time the device is charged.

Just plug it in your iPhone or iPad and the iXpand Base takes care of backing up your data while it fast charges your device.

The iXpand Base has a soft rubber top that holds your iPhone in place while charging on your desk, a nightstand, etc.

The iXpand app will let you quickly restore your files to your current device or a new one.

To learn more about the Sandisk iXpand Base, visit sandisk.com and to buy one, head over to Amazon where they are priced from $99.99 up to $199.99 depending on the storage capacity.

Filed in categories: News

Tagged: ,

Sandisk’s iXpand Base charges and backups your iPhone’s data originally appeared on The Gadgeteer on September 5, 2017 at 11:11 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

The SureFire FirePak puts 1500 Lumen on the back of your iPhone

iPhones take pretty decent low light pictures, but they don’t do that well capturing low light video. If you’re tired of dark grainy videos, shine some light on your subject with a SureFire FirePak illuminator.

The SureFire FirePak is a 4.6-inch illuminator that clips to the back of an iPhone 5, 6, or 7 series iPhones with a special included case.

The FirePak features two high-performance LEDs that have an output up to 1500 lumens and a reach of 50 feet. The light has four brightness levels that can be customised using an app on your phone or manually with a side switch on the side.

With mega brightness comes a mega price tag of $299.00 when you buy it through SureFire’s site, but if you order through Amazon, it’s only $149.00.

Filed in categories: News

Tagged: ,

The SureFire FirePak puts 1500 Lumen on the back of your iPhone originally appeared on The Gadgeteer on September 2, 2017 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.