Tech Armor Wireless Charging Car Vent Mount review


REVIEW – As I detailed in my recent review of the expensive and functional Naztech MagBuddy Wireless Charger, most newer cell phones are able to be charged wirelessly and there are a growing number of options on the accessory market these days. Following up with that review comes my experience using the slightly more affordable Tech Armor Wireless Charging Car Vent Mount. At $29.99, the Tech Armor Charger has an innovative method of securing your phone and is serviceable but a bit flimsy.

What is it?

The Tech Armor Wireless Charging Car Vent Mount is a car phone holder that can charge your Qi-enabled phone through contact. The charger holds the phone in place with two side brackets and charges through power coils embedded in the mount. The Tech Armor can deliver 10W of power to certain iPhones and Samsung phones, but other phones, like my Google Pixel 3, will only receive the standard 5W of power.

The Tech Armor arrives in a thin cardboard box that has a picture of the device on the front and details its capabilities. The unit and accessories are well protected inside the box in a molded plastic holder.

What’s in the box?

  • 1 Tech Armor Wireless Car Charger
  • 1 Micro USB Cable
  • 1 Base Stand Attachment
  • 1 User Manual

Design and features

When I first opened the box for the Tech Armor Charger I was excited to see that the brackets were made of aluminum, but unfortunately, I was mistaken. The brackets are made of lightweight plastic made to resemble aluminum.

Despite the plastic construction, the Tech Armor Charger does have an innovative solution for holding your phone. The side brackets of the mount are spring loaded to stay open and are triggered to close when weight is applied to lower bracket.

When you drop your phone down on to the lower bracket, the weight of the phone closes the side brackets which keep your phone in place. The system works well and held my phone in place securely.

On the back of the Tech Armor Charger is a small four slotted vent mount. To mount, push the slots on to the vent fins of your car and the pressure of the slots hold it in place. There is a small nut that tightens or loosens a ball and socket joint which allows you to position the phone at a desirable angle.

If your car’s air vents aren’t compatible with the Tech Armor mount, you can use the supplied Base Stand Attachment to secure the charger.

The Base Stand Attachment fits snugly over the vent mount on the back of the charger.

Once the attachment is connected, you can use the 3M adhesive on the bottom to secure the charger to your dashboard.

I’m not sure how stable the Base Stand option is, but I’m glad they provided a way to use the mount in cars that may not have compatible vents.

The Tech Armor Charger is powered via a Micro USB port on the back of the unit.

The included Micro USB to USB A cable connects to the unit and then to any USB power supply. I was disappointed to find that the Tech Armor Charger did not come with a USB car lighter power adapter.

Setup

Setting up the Tech Armor Wireless Charger is very easy to do. Attach the mount to your car vent, connect the unit to a power source, drop in your phone and you’re good to go.

It took some time to adjust the Tech Armor to the right angle. A few times, I thought the angle was correct, only to have it shift because the unit wasn’t securely attached to my car vent.

Performance

For the price, the Tech Armor Charger performs well. Every time I put my phone into the charger, the mount held it in place and the wireless charger immediately kicked in. There were a few stability issues, but I was able to narrow it down to how my car’s vents work and was able to correct it.

One major complaint though is that because of the way the mount is designed, you’re not able to rotate the phone and use it in landscape mode. If the phone is rotated too much in any direction the weight is removed from the bottom bracket and the phone will fall out. This goes directly against Tech Armor’s claim on the website that the angle of the unit is adjustable.

After repeated use, it’s also clear that despite what it says on Tech Armor’s website, the unit is not able to be operated one-handed. When you drop the phone into the mount you need to use two hands, one for the phone and one to support the unit; the same goes for removing the phone. You can’t remove the phone without securing the unit first.

What I like

  • Stable connection and power
  • Easy setup
  • An innovative way of securing the phone

What needs to be improved

  • Can’t rotate the phone
  • Stability dependent on car vent
  • No car charger included
  • Plastic, flimsy construction

Final thoughts

The Tech Armor Wireless Charging Car Vent Mount is a functional, affordable option for those looking for a way to charge their newer phones on the go. The charger supplies steady wireless power and a stable phone holder if your car’s vents are compatible and stable themselves.  Though, I was disappointed that at a cost $29.99 the charger didn’t come with a car lighter power adapter, was made totally of plastic, and doesn’t give you the option to use your phone in landscape mode. The overall construction is a little flimsy, but the Tech Armor Wireless Car Charger does what it was made to do.

Price: $29.99
Where to buy: Tech Armor and Amazon.
Source: The sample of this product was provided by Tech Armor.

Filed in categories: Reviews

Tagged: ,

Tech Armor Wireless Charging Car Vent Mount review originally appeared on The Gadgeteer on January 30, 2019 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

The Netatmo Smart Video Doorbell: an alternative to those with subscription fees

NEWS – Netatmo is working on their own version of a smart doorbell: the Netatmo Smart Video Doorbell. What’s so special about it? Well, it doesn’t require a subscription service, it can tell when a detected motion is a person (not facial recognition) so that you don’t receive useless motion alerts, it notifies you instantly when someone attempts to deactivate it, and…

…you receive a video call immediately when someone rings your doorbell. It seems like this will address all of my pet peeves with our current video doorbell!

The Netatmo doorbell uses the wiring of your existing doorbell (thus, it requires a wired doorbell and chime to work), connects to your home WiFi network (802.11 b/g/n – 2.4GHz), and uses a microSD card to locally store your videos (up to 32 GB). You can also set it up to automatically save your videos to your Dropbox or personal FTP server.  It has a 160 degree 1080p camera with HDR function to adjust to sudden changes in lighting, has infrared night vision, has a built-in microphone and speaker, works with Apple HomeKit, and it provides an encrypted connection to protect your data.

Unfortunately, the Netatmo Smart Video Doorbell is not available for purchase yet. It will hopefully be available in late 2019 according to CNET.

Filed in categories: News

Tagged:

The Netatmo Smart Video Doorbell: an alternative to those with subscription fees originally appeared on The Gadgeteer on January 30, 2019 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Posted by / January 30, 2019 / Tagged with / Posted in News

Phiaton Curve BT 120 NC Earphones review

REVIEW – Last month we announced the launch of Phiaton’s new active noise cancelling earphones. First impressions were great, and I’ve been testing them ever since in my quest for the perfect earphones for the gym. What have we learned? To the review!

What is it?

It’s a neckband style pair of Bluetooth earphones that offer call features, active noise cancelling, and IPX4 water resistance..

Hardware specs

  • High Quality Dynamic Speakers Unit: 12 mm
  • Impedance: 16 Ohm
  • Sensitivity: 102 dB/mW
  • Frequency Range: 20 Hz ~ 20 kHz
  • Max. Input Power: 40 mW
  • Communication Network: Bluetooth 4.2
  • Operating Range: Within 10 m / 33 ft.
  • Call Time (NC on / off): 5 hrs / 8.5 hrs
  • Music Play Time (NC on / off): 5 hrs / 8.5 hrs
  • Standby Time (NC on / off): 12.5 hrs / 290 hrs
  • Full Charge Time: 2 hrs
  • Weight: 25 g

What’s in the box?

Your kit comes with the earphones, three different sizes of silicon ear tips, two sizes of “RightFit+ Ear Wings” (more on that below), a USB charging cable (not shown), a warranty card, and a quick guide.

Design and features

I am on the endless quest for the perfect Bluetooth earphones for the gym. I’ve been trying all kinds of variations from completely wireless buds to neckband-style configurations. Compared to some other models I’ve tested, the Phiaton Curve earphones get a lot of things right. Let’s start with an overview of the design, then delve into performance!

Design Overview

The Phiaton Curve earbuds are actually a two-part configuration. You’ve got your silicone nib (the part that sits on your ear), along with something Phiaton calls RightFit+ Ear Wings. These are little silicone tabs that tuck into the whorl in your ear.

The Internet tells me that this fleshy fold is the part of the ear called the antihelix (thanks, Internet!). And that little tab does a good job of keeping your earbuds from popping out, while being really comfortable. Here’s what it looks like when the tab is in place:

Phiaton includes three different sized nibs and two sizes in the ear wings, so that you can mix and match to find a snug fit. I have two in the earbuds now, the extras are shown below.

The earbud cables drop to two pods that house all the components, which then connect via a neckband (that small pod you see just below my chin is the microphone). Note that the whole unit is IPX4 water resistant, which means it will stand up to sweat and offers water resistance. It’s not designed for sustained water contact or to be submersible, so be careful with your chosen activities.

The neckband itself is made from a thicker rubberized “memory flex” material, designed to stay in place while you are in motion. It’s light and comfortable and generally does a good job staying put. Here’s a shot from behind to see how it hugs the neck:

All of your controls are found in the left-hand pod. There are three buttons on the inside face, each slightly raised for tactile feedback. These three buttons (volume up, volume down, and power) are actually each multifunction buttons with a “one click” and a “click and hold” function. The volume buttons, for example, raise and lower the volume with one tap but switch tracks on a click and hold.

The side of this pod houses the USB port tucked behind a rubber seal as well as a button that enables the active noise cancelling feature:

 

Performance

The Phiaton Curve earphones do a lot of things well. Some areas of general usability may be hit or miss, depending on your intended use.

Let’s start with the big one: compared to numerous other options I have tested, the Phiaton Curve earphones may have the best sound quality I have heard in a pair of minimalist earphones to-date. The audio is crisp and clean with great range when listening to music. You won’t mind using these on the train or during a flight, because the active noise cancelling feature really does the job. Call quality is excellent as well with great pickup on the microphone. I have had no issues making calls, nor have I had anyone complain about sound quality on the other end.

Power management is also excellent on the Phiaton Curve earphones. When you turn them on, a little voice informs you of the current power level. You can charge them for 5 minutes to get an hour’s charge for a quick workout, a great feature if you forget to charge your earbuds! A full charge takes about 2 hours and holds for between 5 and 9 hours of active use, depending on how much music you’re playing. I’ve had them sit for a week powered off, and still come back to nearly a full charge when I power them up. Very impressive.

The fit and comfort on these earphones are also excellent. I really do like the Ear Wings provide *just* enough stability and flexibility to keep the buds in your ears without being irritating. It’s a great little design.

If you’re a runner or doing activities that keep you vertical, you’ll have no issues with the neckband. It’s really comfortable and practically weightless. The neckband does tend to slide around a bit in other situations. I’ve had it get caught on the lip of the weight bench, for example, or flop around when I am doing stretches on a mat. The memory fit neckband doesn’t really hold its shape, you can’t cinch it tightly for more complex maneuvers. I did see that Phiaton states that a clip is included in the package for this purchase. That would help, but my pre-release copy did not come with it.

The other issue that takes some getting used to is the controls. Ideally, you’d like to be able to manipulate the buttons without looking at them, like so:

To make this truly intuitive those controls could use for some fine tuning. The tactile feedback on the buttons is not very pronounced, making it hard to find the right button without looking at the controls. The dual-function features are also super-sensitive, often resulting in you triggering three wrong functions. I’d often find myself pressing the wrong button, or skipping to the next song (press-and-hold on the volume up button) when I just wanted to increase the volume. I’m getting better at it with practice, but I actually find it easier to use the controls on my iPhone directly rather than messing with the pod controls.

What I like

  • Amazing sound quality
  • Excellent microphone
  • Comfortable to wear
  • Great power management
  • Noise cancelling that really works

What needs to be improved

  • The neckband could use some more grip or rigidity to stay in place when you’re not standing or sitting up.
  • Touch controls can be super sensitive and are hard to manipulate without looking at them.

Final thoughts

Some minor issues aside, this is a really great pair of earphones. They’re lightweight, comfortable, and produce great sound quality for the gym or travel. The quick charge feature is fantastic. The active noise cancelling is the real deal, and call quality is excellent. Runners & cyclists will love them, and so will commuters. I’d just a like a better solution to keep the neckband in place for a broader range of activities. Given the rest of the good qualities, however, I’m happy to find other solutions to solve for that.

Price: $79.99
Where to buy: Get ’em on Amazon.
Source: The sample of this product was provided by Phiaton.

Filed in categories: Reviews

Tagged:

Phiaton Curve BT 120 NC Earphones review originally appeared on The Gadgeteer on January 30, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Design your own clock/speaker/alert system with Divoom Timebox Mini

NEWS – Don’t let the retro-feeling, pixelated display fool you! In just a few square inches, the Divoom Timebox Mini packs in a quality speaker, clock and notification system that’s completely customizable.

An app lets you create a personalized system to match your needs and individual whimsy. Want Sponge Bob to rouse you in the morning? A glowing American flag all day on July 4? A silly emoji to announce your incoming email? Pick your own notifications and tap into hundreds of preset images and videos, or design your own with 121 full RGB LEDs.

 

Its Bluetooth 4.0 speaker features a 3.5mm AUX output and input, so you can use the audio however you choose.

The Timebox Mini is smaller than a soda can, measuring 3.5 x 1.5 x 3.6 inches and weighing just over a pound. It comes with a Micro USB charger and lasts about six hours per charge, but anyone using it as a clock would just leave it plugged in.

Touted as a sleep-aid and time-management system, Timebox also includes some entertaining elements like a stopwatch, digital dice, scoreboard, slot machine, and simple mini-games.

The Divoom Timebox Mini retails for $42.90 on Amazon.

Filed in categories: News

Tagged:

Design your own clock/speaker/alert system with Divoom Timebox Mini originally appeared on The Gadgeteer on January 30, 2019 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Arlo rolls out new Ultra 4K wireless security camera

NEWS– The home security camera market has become quite crowded in the last few years. Arlo’s latest camera, the Arlo Ultra, announced in late 2018 and on display at CES 2019, seeks to distinguish itself from the pack with features that include 4K video, 2-way audio, and an integrated spotlight.

My first generation Arlo camera has been pulling front porch duty at my home for 4 years now. While it’s served me well, save for a warranty replacement due to pink video resulting from a stuck IR filter, the video quality has ceased to impress me. Also, after looking at my neighbor’s Ring doorbell cameras and their ability to stream conversations, I became convinced that I needed to add audio to my home security camera package.

Enter the Arlo Ultra. In addition to the increased video quality, the Ultra boasts numerous enhancements to the original Arlo, including some that surpass what’s available in the current Arlo Pro 2. These include:

  • 4k Ultra HD with HDR capabilities
  • Enhanced Color Night Vision
  • Auto-zoom and tracking
  • 180-degree field of view
  • Dual noise cancelling microphones for clearer, more natural conversations
  • Built-in LED spotlights

If the new 4K video doesn’t place too much of a burden on the Ultra’s improved battery and the increased streaming demand doesn’t cause users to bump up against any of their broadband providers monthly data limits, Arlo could have a real winner on its hands with the Ultra which will be priced at $299.99. Head over to Arlo.com for more details on this new camera.

Filed in categories: News

Tagged: ,

Arlo rolls out new Ultra 4K wireless security camera originally appeared on The Gadgeteer on January 29, 2019 at 1:23 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.