Reviews – Page 79

Moshi Tego Sling review

REVIEW – More sling bags! The only thing better than More Cowbell! Just kidding. But the more I test and carry these bags for a week or two at a time, the more I am convinced this is the bag everyone should be carrying for EDC nowadays. I wrote a news article here a while back about the Moshi Tego, and the company offered us one to test. When it arrived, I was stunned at how spacious it is inside and how well it fits into my “big-flat-slab-of-glass” lifestyle. Let’s check it out!

What is it?

A stylish sling bag made from slash-resistant materials with zippers for all pockets against your body. Great for crowds, touring in dangerous areas, and for just taking your iPad and lunch to work. It’s available in three colors – Stone Grey, Charcoal Black, and Vintage Brown. I was sent Vintage Brown

What’s in the box?

The bag itself.
A dust-proof storage sack

Hardware specs

Padded compartment for laptops up to 13”
Padded compartment for iPad 12.9-inch
Proprietary ViscoStrap alleviates shoulder strain by up to 30%.
Quick-release strap for fast access to belongings
Adjustable Airmesh crossover strap with accessory loops
Removable ActiveStrap for added stability
Crossbody design that is wearable on the left or right shoulder
Concealed, anti-theft rear zippers
RFID Shield pocket to protect personal data

Materials

Cut-proof and lightweight fabric
3M Scotchlite reflective strip for safety at night
Padded Airmesh support for breathability and comfort
Weather-resistant surface treatment
Zinc alloy hardware and studs

Dimensions

Length: 16.34 in (41.5 cm)
Height: 12.01 in (30.5 cm)
Width: 4.72 in (12 cm)
Weight: 1.87 lbs (0.85 kg)

Design and features

The Moshi Tego is designed with security in mind. The zippers are both tight against your body when being carried. The materials are cut-resistant. By being able to slide the bag around in front of you while wearing it in crowded situations or on public transportation, you have better control and awareness of anyone attempting to access your bag.

The outside of the bag is made of a synthetic woven water-resistant material that resists cutting. The top has a shaped roof-like covering that is made from a similar material but is coated in a vinyl-like material. Under the edge of that roof is a strip of Scotchlite reflective fabric. (The flash from my camera set it off in the shot above. I originally snapped it for the raindrops beading up on the fabric.) When you’re cycling, bent over the handlebars, this stripe is squarely in the headlights of approaching vehicles.

The strap is 1.5″ wide seat belt material for most of its length. Each end is sewn into a custom molded spinning clip with the company name molded in, and attached to the bag with solid molded D-rings of the same matte-finished zinc alloy. The wearer can swap which ring it’s clipped into to wear it over either shoulder. The long end of the strap has a cam-release that makes it a breeze to tighten or loosen your strap with one hand. When tightened, there is a management loop for the free end, but it is sewn in at the end of the strap next to the lower clip. (It’s visible on the right center of the photo below. I’m debating cutting it free, but that may cause it to come apart and I don’t have a way to sew it back.)

The part you wear on your shoulder has an 11″ long x 3″ wide Airmesh cushion. This is attached to the clip with a dual-thickness, 1.5″ wide elastic band. This allows the bag to give slightly as you’re moving along so that the load doesn’t feel quite as heavy. In use, I found this very comfortable. (It’s visible on the left center of the photo below.)

There’s also a removable crossbody band that goes from a removable loop on the strap to a thinner D-ring on the bottom center. Great for stability if you’re cycling, running or need the extra security. (It’s attached in the two photos at the top of the article, but you can see the center D-ring below.)

The only opening into the main compartment zips out with a double-headed zipper from the side that fits flat against your back (or front) when you’re wearing it. The zippers pull down to about 3″ from the very bottom of the bag. On the outside of that flap opening, which is against your body while wearing, is an RFID-shielding pouch large enough for passports, credit cards, and other items that you may need fast access to. At 9″ x 5″, with no actual width (see photo below), it’s not going to be a place for your eReader or phone (although either of mine fit in there), but it’s great to have a secure place for travel documents, credit cards and ID. It’s also padded with an open Airmesh material that will aid in ventilation since it rides on the center of your back.

Inside the main compartment, against your back, there is a thinly padded laptop/tablet sleeve with a 1.25″ wide velcro strap closure. It will hold my original 12.9″ iPad Pro in the Moko case, but it’s a tight fit. The Lovely Bride’s MacBook Air fits in the main compartment, but is a touch too large for the padded sleeve. On the outside of this are two flat pockets 7″ x 4.5″. There is a little extra fabric to allow items of depth to be carried here (passport, Moleskine, power banks and the like). Across on the outer side are two more such pockets, 3.5″ deep x 6″ wide.

What I like

Huge main compartment
Secure opening
Large RFID pocket
Great materials and design

What needs to be improved

Main strap has a great management loop, but it’s sewn in

Final thoughts

This is a fine bag for those carrying large, flat items but also needing some bulky item storage space.

Price: $149.95
Where to buy: Moshi store or Amazon
Source: The sample of this product was provided by Moshi.

Filed in categories: Reviews

Tagged: Bags

Moshi Tego Sling review originally appeared on The Gadgeteer on March 30, 2019 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Smart Nora Snoring Solution review

REVIEW – If you or your partner snores, you know the struggle. I’ve snored for years and tried all kinds of solutions, so I jumped at the chance to review the Smart Nora snoring solution. Has Bob finally secured peace in the bedroom after all these years? To the review!

What is it?

It’s a system that uses a sensor to detect snoring, activating an inflatable insert under your pillow to stimulate your throat muscles and resume normal breathing.

What’s in the box?

The Smart Nora kit includes everything you see in the picture below, including:

The base unit.
The Bluetooth sensor “egg” with a USB charging cable.
An egg cradle for wall mounting.
The pillow insert.
A soft sleeve for the pillow insert.
A standard power chord, with adaptors for international markets.

Design and features

The Smart Nora is a non-invasive solution to reduce snoring. The unit consists of three primary components. The first is a 20″ by 8″ pillow insert connected to an air hose:

The second is the sensor egg, a palm-sized Bluetooth unit (4″ by 2-1/2″ by 1-1/4″) that detects your snoring:

And the third component is the base unit, a 10″ by 4″ by 7″ box that manages all the functionality.

Here’s what it looks like when everything is in place:

And believe it or not, this thing really does seem to work in my case. Let’s walk through the setup, then we’ll talk about operation and performance.

Setup

You’ll have the Smart Nora setup in just a few minutes. You start by connecting the air hose from the pillow insert to the base unit.

The power plug also connects to the base unit. The Smart Nora includes multiple adaptors for international markets, which is a nice bonus if you plan on taking it on trips.

The sensor egg is charged by plugging it into the base unit with the USB cable that’s included with the package. Once charged, the egg can be disconnected and operates via a Bluetooth connection.

The pillow insert also includes a foam padded sleeve that can be used if desired.

Slide the pillow insert into your pillowcase under your pillow, and you’re good to go!

The sensor egg is designed to be in close proximity to the user when sleeping and includes an adhesive-backed mount so that you can position it on the wall or headboard above the sleeper’s head. I have a nightstand next to my bed right next to my pillow, so I’ve been keeping mine there.

Operation

The pillow insert is where all the action is. When snoring is detected, an air compressor in the base unit gently inflates air bladders in the insert to get things moving. Here’s what it looks like when the insert inflates:

And here’s an inside shot of the air bladders. Once they come to full inflation, the weight of your head will gradually deflate them back to the flat position.

You can also select the height to which the insert will be inflated. I started in the “high” position, but found it to be a bit uncomfortable for me. I’m using the middle position right now.

The controls for the sensor egg are all on the underside. You can adjust the sensitivity of the device to account for noisier bedrooms. The Bluetooth connection reset is there as well as the power on/off pad.

When fully set up, you just push on the egg to turn it on or off. A blue light indicates that the unit is on.

Throughout the course of the night the insert will slowly inflate when snoring is detected, then slowly deflate in a cycle that runs about 30 seconds. The gentle motion is intended to stimulate your throat muscles to resume normal breathing.

Performance

I really like the usability of the Smart Nora solution. A lot of snoring devices can be pretty invasive, involving mouthpieces or other equipment that takes a lot of getting used to. There’s none of that here. Setup takes minutes. No changes are required to your bed arrangement. When you’re ready to go to sleep, you just press the egg and go to sleep in whatever position you are comfortable with using your regular pillow. You will hear the air compressor and some squeaking as the pillow inflates/deflates, but the noise is subdued and the movement is slow and gentle. It does take about a week to get used to, but I don’t even notice it now.

After a week of adjusting to it, my wife and I have both noticed significant improvements in my snoring. There are nights when I snore like a rusty chainsaw cutting through cinderblocks. While the Smart Nora hasn’t completely eliminated my snoring (I have some pretty bad allergy issues), it’s certainly much better. My wife isn’t getting woken up in the middle of the night by my commotion like she used to, and if I do snore she says it’s significantly less disruptive than it was before. Four weeks in and I feel like I am getting better rest as well.

The Smart Nora is clinically tested to be effective. I had an opportunity to chat with one of the researchers at Sleepscore Labs that ran the clinical trials on the Smart Nora. 29 couples were monitored in their homes for two weeks without the Smart Nora, and then two weeks with the device. Electronic monitoring demonstrated measurable improvements in sleep quality for both partners, and daily surveys indicated that 78% of the participants (both the snorer and partner) believed that their sleep was improved after using the Smart Nora. I’d say that pretty much aligned with my personal experience.

It’s important to note that there are lots of causes for snoring, and the Smart Nora isn’t a guaranteed fix. It won’t work for you if have sleep apnea, for example. I’d suggest you check out the Smart Nora web site and have a chat with your doctor to see if it might work for you.

What I like

Non-invasive snoring solution that’s easy to adjust to.
Simple setup and operation.
Excellent usability.
Subtle looks don’t stand out like a medical device in your bedroom

What needs to be improved

May not work for all snoring conditions.

Final thoughts

There can be lots of underlying causes for snoring, and the Smart Nora presents a unique solution that’s backed by clinical studies. I can’t say that it will work for everyone, but I can tell you that it’s worked for me and (more importantly) my wife. We’re both sleeping better on a nightly basis and I haven’t been banished to the spare room for month. Everyone wins. The excellent usability also makes for a solution that’s easy to use daily. I’ll keep you posted as I continue to use it.

Price: $329.00
Where to buy: Buy it at the Smart Nora web site.
Source: The sample of this product was provided by Smart Nora.

Filed in categories: Reviews

Tagged: Health and fitness, Sleep

Smart Nora Snoring Solution review originally appeared on The Gadgeteer on March 30, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

moshi Symbus Q USB-C docking station with wireless charger review

REVIEW – Laptop + large monitor = a boost in productivity. But how do you connect your laptop to your monitor? When you have a 12inch MacBook like I do, you have to have a USB-C dock like the moshi Symbus Q USB-C docking station with wireless charger. Let’s check it out.

What is it?

The moshi Symbus Q USB-C docking station with wireless charger is a USB-C dock that has an HDMI port that supports 4K, 2 USB ports, an Ethernet port, and fast wireless charging.

Hardware specs

Qi-certified wireless charging – supports Apple 7.5 W and Samsung 9 W wireless fast charging
Charges through cases up to 5 mm thick
HDMI port for adding an external display (4K@30Hz, 1080p@60Hz)
Gigabit Ethernet port for wired data transfer up to 1000 Mbps
2 USB-A ports for connecting a keyboard, mouse, or hard drive with data transfer at rates up to 5 Gbps (USB 3.1 Gen 1)
High-speed USB port for charging your smartphone or tablet (2.1A)
Full USB PD function for fast-charging USB-C laptops (up to 60 W)

What’s in the box?

Symbus Q docking station
Power cord
AC adapter

Design and features

In the most basic sense, the moshi Symbus Q is a rectangular device with a 19.5 inch USB-C cable that comes out the back side.

The top of the dock has a woven cover with a geometric design that is made of raised rubber ridges that help to keep a device from sliding around when using the wireless charging feature.

The sides of the dock are made of what I think is brushed aluminum and the base is black plastic.

The front of the dock has a status LED on the left side that glows green while the dock is being used as an HDMI adapter between your laptop and a display. The status LED glows in red while throbs in green while the Qi wireless charging feature is being used and will blink red if you place a non-Qi compatible device on top.

The back of the moshi Symbus Q has an Ethernet port, a 4K HDMI port, and the power port.

To test the functionality of this docking station, I tested it with my 12-inch MacBook and BenQ monitor. If you are familiar with the 12 inch MacBook, you’ll know that it has only 1 port, a USB-C port. That’s it. So the Symbus Q offers a lot of functionality by plugging directly into the MacBook’s USB-C port. Then I connect an HDMI cable (not included) from the dock to the monitor.

I had no issues using HDMI connectivity with this dock and my MB. It worked great. The dock supports 4K so I also tested with a 4K monitor and had no issues there either.

The wireless charging feature worked fine as well. I currently only have one device that I could test this feature though… a Sony Xperia XZ2.

I also tested the USB ports on the front of the dock and they both worked as expected.

One thing that I didn’t test was the Ethernet port. I don’t use a wired network in my office, so I had no good way to test the functionality of that feature.

The features that I was able to test all performed flawlessly. However, I did discover one bummer…

The snazzy padded cover over the wireless charging surface is just stuck on the top with a ring of adhesive that isn’t sticking all that well as you can see from the image above.

What I like

4K docking station with a built-in Qi charger
Attractive design

What needs to be improved

Padded top is attached with adhesive

Final thoughts

I like the features and the look of the moshi Symbus Q USB-C docking station but the problem with the padded cover not sticking securely in place is a little worrisome especially when you factor in the $164.95 price tag. I’d rather just buy their $59 USB-C hub and their $40 Otto wireless charging pad and save $65.

Price: $164.95
Where to buy: Amazon
Source: The sample for this review was provided by moshi.

Filed in categories: Reviews

Tagged: Batteries and Chargers, Dock, Qi

moshi Symbus Q USB-C docking station with wireless charger review originally appeared on The Gadgeteer on March 29, 2019 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Silca Seat Roll Grande Americano review

REVIEW – If you’re a cyclist, chances are you’ve heard of Silca. They’re known around the world for their bicycle pumps which they’ve been making for over 100 years. They also make amazing tools and accessories that all have an attention to detail that would be hard to call anything other than obsessive. My first job was building BMX bikes at my local bike shop. I picked up the wrenches again in college before my first real career in snowboarding. What’s the point of memory lane here? Silca recently launched an under-seat pack that uses a Boa reel for cinching it to the bike. I use a Boa system on my snowboard boots today and remember their launch almost 20 year ago. My two favorite sports coming together – Sign me up. Detail time.

What is it?

Silca’s Seat Roll Grande Americano is a fold-and-roll pouch that stores under the seat on your bicycle. Under seat bags are great for holding the necessities (like tools) that you don’t want in your jersey pockets or in a backpack.

What’s in the box?

Seat Roll Grande Americano
Hanging Card Packaging

Hardware specs

Ballistic nylon with a DWR coating (Durable Water Repellent finish)
Uni-body, one piece construction
Boa® closure system
Rail guard – Protects and grips seat rails
3 internal pockets
Heavy duty elastic for adjustable volume closure
Sewn in the USA

Design and features

Deceptively simple, the Seat Roll Grande Americano is essentially a tool roll. It’s made out of a single pattern that’s folded and securely stitched to create it’s three pockets and flap and then a strong elastic strap to help hold the thing together.

The other major design feature is a Boa closure system that uses a very thin cable that retracts and releases with a very intuitive reel. I’ll explain how to use one in just a minute, but what you should know is that it’s crazy durable, super light weight and leaves nothing dangling behind. Velcro can be a mess, pick up mud and the hook side can wreck clothing. Yay Boa!

Setup

Removing the pack from the card can be a bit confusing if you haven’t used a Boa reel before. Grab the Boa reel with your thumb and forefinger and pull straight up until you hear a click.

Then grab the pull tab and pull sideways to free the tab and “unspool” the reel.

Now you’re free of the hang card.

From there go ahead and undo the velcro and unfold your pouch.

Performance

As I mentioned up above I’ve been using a Boa system on snowboard boots for a while. I trust them to keep my feet safely in my boots, so lashing a pouch under a bike seat seems like a pretty easy task for this ingenious little reel.

The three pockets are evenly divided with the center pocket being the largest.

I carry a rather large multi-tool with a CO2 regulator that only fit in the center pocket, so that decision’s made. The 700c x30 tube is in the right pocket and a CO2 cartridge and maybe some tire levers over in the left pocket.

Here’s all those tucked firmly down in.

When folding down the top, you’ll want to fold as close to or actually on the pocket top if you can to reduce the risk of any gaps for stuff to get out or muck to get in. Fold each of the sides in and secure with the big, sturdy elastic band.

Putting it on your bike is a simple process of feeding the flat rail guard section shown above over your seat rails, hooking the pull tab on the receiver and then ratcheting it down. You may need to hold the guard in place, but it’s an easy process and you literally just turn until it gets hard to turn. Make sure you push the Boa reel down for the click to ratchet mode.

Here’s how it snugs up under a seat.

You may want to play with the organization of your stuff in the pockets to get them as flat as possible and pushed to the outer edges of the outside pockets as this will give you the smallest pack when folded.

One thing to know is that as a tool roll, it gets completely removed from the bike when you need access to your stuff. This is a good thing as all your tools can be visible at once on a flat surface, rather than digging in a tiny bag still on your bike.

The Boa system is ideal for this scenario as the volume completely adjusts depending on what you have in the roll, and then how tight you ratchet it down onto your seat. As a result, there’s no rattle or noise or swinging weight from under your seat. In a word… perfect. Great addition to my gravel bike.

What I like

Boa closure system
Materials and construction
Security to bike when riding
Jangle free

What needs to be improved

None that I could find

Final thoughts

I usually run a lightweight waterbag for rides, but the Silca Seat Roll Grande Americano holds my tools and some of the bulkier items so securely and silently that I’ll be throwing a cage and bottle on my bike now for shorter rides. Silca’s pack doesn’t move once it’s ratcheted down and there’s something immensely satisfying about the click and unspool of the Boa to get to your gear. It almost creates a desire for a flat tire to occur… Almost.

Price: $58
Where to buy: Silca.cc
Source: The sample of this product was provided by Silca.

Filed in categories: Reviews

Tagged: Bags, Bicycle

Silca Seat Roll Grande Americano review originally appeared on The Gadgeteer on March 29, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Edge of Belgravia Stingray frying pan review

REVIEW – The award-winning designers at Edge of Belgravia are at it again. But this time we’re not looking at knives… we’re looking at cookware! The Stingray nonstick pan is kicking off a new kickstarter campaign this week. I got a pre-launch sample to see if it’s more than just sharp looks. How did it perform in the kitchen? Let’s cook!

What is it

It’s a nonstick frying pan.

Hardware specs

19.25″ long by 12.25″ wide by 2.5″ deep.
2 pounds, 14 ounces.
Aircraft grade aluminum construction.
New ILAG nonstick surface.
FDA tested non-toxic and PFOA free.
Induction range compatible.
Oven safe to 480 degrees fahrenheit.

Design and features

I reviewed the Edge of Belgravia Gallatine knife set and Black Diamond knife block last year, and loved the combination of avant-garde design and performance. They’re still my day-to-day weapons of choice. The Stingray is the company’s first foray into other cooking products, carrying through their unique design language in a frying pan design.

The hexagonal design of the Stingray just looks incredible. The “Stingray” moniker comes from the unique shape coupled with the contoured handle, that vaguely resembles the sea beastie that we all know and love.

But there’s more than pretty looks behind the design of this pan. Heavy-duty aluminum is the primary material. It’s got the stability and thickness of cast iron, but weighs in at just under three pounds. A diffuser on the base promotes even heating and is compatible with induction cooktops.

The handle has a nice contoured grip that makes for comfortable maneuvering when put to task. Notice that the angle of the handle keeps your knuckles from brushing against the stove top, and the 9″ length gives you plenty of room to keep your digits safe from the heat.

A pair of bolts connect the handle to the pan, and there’s no wiggle to be found in the grip. The construction is rock-solid.

To put the pan to the test, I decided that stir-fry was the way to go. The thick walls of the pan do a great job of absorbing & retaining heat, which is essential for stir-fry. I started with browning some chicken. The hexagonal shape is perfect for that fancy flipping maneuver that makes your guests say “oooh!” I was also able to get a nice sear on the chicken. Check out the action shot below.

The pan is coated with a new nonstick formula that is reportedly provides better durability and will last longer than traditional nonstick coatings. After browning my chicken, I was able to get nice even searing on the veggies with just a touch of cooking oil for flavor.

With a 2.5″ pan depth, this pan is great for both frying and simmering tasks. I added all my ingredients back in the pan along with a sauce to simmer for a few minutes. There’s 1.5 pounds of chicken in there, a whole bunch of vegetables, and a cup of the sauce liquid. I’ve got a meal for 6 in one pan.

Once the cooking is complete, that hexagonal shape is ideal for pouring out your masterpiece. Check out how the corners help me control things when I am pouring out the contents of the pan. I have a LOT of stuff in there, and nothing is leaking out onto my counter.

The finished product, ready to serve:

I’m liking the way the pan retains a consistent heat without the heft of a cast iron skillet. Check out the close-up. We’ve got some nice searing going on.

We’ll have to see how the nonstick surface holds up to long-term use, but I am pretty impressed with what I am seeing so far. It looks pretty tough in my brief test under higher heat, and cleans up well, and leaves no marks or residue on the pan. Edge of Belgravia states that the pan can handle up to 480 degrees in the oven, a temperature that will destroy many nonstick surfaces. We’ll see how that lasts in extended testing.

There are a few things I did find in my testing that you should be aware of. That abrupt vertical angle on the sidewalls is great for simmering and pouring out liquids, but I haven’t tested it on dispensing large flat items (like omelets) yet. I think it should do the job well. The handle can also get warm at higher heats, closer to the contact point with the pan. It does stay cool at the far end of the handle. I think a matching lid for this piece would also be an excellent addition. I used a round lid to steam some broccoli for this dish, but the mismatching shape does cause liquids to condense and dribble down the sides. Maybe we will see that in the future.

What I like

Hefty, yet well balanced for handling
Great handle design
Durable, with an excellent nonstick surface
Hexagon shape aids with flipping and pouring

What needs to be improved

Handle can get warm neat the contact point with the pan at higher heats.
Would like to see a matching lid for steaming and simmering.

Final thoughts

I’m really liking this pan, and have used it several times already for routine cooking tasks. It does a great job of retaining heat and even heat distribution, even on my old glass cooktop. It’s very maneuverable compared to cast iron, and that lighter weight combined with a great handle design makes for confident cooking. The nonstick surface looks to be a winner, too.

The Edge of Belgravia Stingray Kickstarter fires up this week. The pan will be offered in 8″, 10″ and 12″ sizes with a starting pledge of about $60 for the 8″ model. You can choose from a variety of packages and combinations from there. The Kickstarter ends on April 30, with a planned delivery date of November 2019. Check out the link below to learn more!

Price: Starting pledge of about $60 US.
Where to buy: Go to the Edge of Belgravia Kickstarter page.
Source: The sample of this product was provided by Edge of Belgravia.

Filed in categories: Reviews

Tagged: Cooking, Crowdfunded, Home and Kitchen

Edge of Belgravia Stingray frying pan review originally appeared on The Gadgeteer on March 28, 2019 at 3:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.