EasyAcc 10W PU Leather Qi Charging Pad review

REVIEW – Many chargers for Qi-enabled devices have entered the market in the past few years.  Most have a very simple design and are typically made of plastic with perhaps some metallic components to add a bit of style.  But did you ever wish your Qi charging pad had just a bit more of a sophisticated look?  EasyAcc must have wanted that too, so they designed their PU (Polyurethane) Leather Qi Charging Pad.  Let’s take a look.

What is it?

The EasyAcc 10W PU Leather Qi Charging Pad is a charging pad for Qi-enabled devices that is very thin and has an elegant-looking polyurethane leather-like surface on its exterior.

What’s in the box?

  • EasyAcc PU Leather Qi Charging Pad (with integrated USB power cable)
  • Instruction booklet

Hardware specs

  • Charge modes:
    • 10W quick charge for most Android phones
    • 7.5W mode for Apple iPhones
    • 5W slow charge mode for Pixel devices
  • Exterior: Polyurethane (PU) leather-like material that is mothproof and antibacterial
  • Dimensions:
    • 4.25 inches (10.8 cm) in diameter
    • 7/16-inch (6.5mm) thick
  • Charging cable: 4 feet, 9 inches (57 inches or 145 cm) long integrated USB
  • Compatibility
    • Will charge virtually any Qi-enabled device, with a few exceptions
    • Can charge through cases up to 5mm thick
  • Built-in protection against overheating, overcharging, and short-circuits
  • Warranty: 18 months

Design and features

My initial impression of the EasyAcc 10W PU Leather Qi Charging Pad was that its PU leather material was very soft and felt and looked almost like real leather.

The PU leather material has been applied to both the top and bottom of the charging pad, and it acts as a non-slip surface on both sides of the device, helping to prevent your phone from slipping off its top, as well preventing the charging pad from slipping off smooth surfaces.

Despite the layers of PU Leather on its top and bottom surface, this is a very thin charging pad at only 6.5mm thick.

The hand-stitched PU Leather material is of course not actually leather but rather artificial polyurethane leather-like material, which is often abbreviated as PU leather or simply PU.  When PU leather was introduced to the market some years ago, it often had a less than flattering reputation due to it often looking and feeling quite fake and un-leather-like.  However, the design and manufacturing processes that produce PU leather today are much more sophisticated and give this material a much more leather-like appearance and texture along with durability and less expensively than real leather.  In addition, the EasyAcc 10W PU Leather Qi Charging Pad is 100% handmade.

This charging pad’s USB power cable is actually integrated directly into the pad itself and is non-removable from the pad.  This helps cut down on the thickness of the pad and also helps give the overall look a more simple, elegant appearance; however, it does require that the cable be plugged into a computer, AC adapter, or another device with a USB port.

When the pad has been plugged into power but there is no device on it being charged, a tiny LED on the top of the pad glows blue.

When a Qi-enabled device has been placed upon the charging pad, the tiny blue LED switches to a green glow to indicate that a device is being charged.

I first used my wife’s iPhone X as a test subject (seen in the photos here), and later my daugher’s iPhone 8 Plus, and the pad charged both iPhones easily.  This pad also seemed to be a bit less sensitive to having the iPhone positioned in a certain location in order for charging to take place, unlike other charging pads that I have tried that seem to require the device being charged to be in a precise spot on the top of the pad.

The charging pad was also able to charge my wife’s iPhone X and my daughter’s iPhone 8 Plus while the iPhones were inside of their protective cases.  This case is about 5mm thick but this did not seem to inhibit charging.

This charger looks quite nice sitting on a nightstand, desk, or just about anywhere you want to use it.

What I like

  • PU leather material has an elegant appearance and feel
  • Very thin
  • PU leather provides a non-slip surface to top and bottom

What needs to be improved

  • Nothing that I can see

Final thoughts

I was impressed with the EasyAcc 10W PU Leather Qi Charging Pad.  Its leather-like PU material gives it a sophisticated appearance and texture, yet it is quite affordable in price.  It is also very thin and not particularly sensitive to the placement of the device being charged.  If you are in the market for a Qi-enabled charging pad that is affordable and has an elegant look and feel, the EasyAcc 10W PU Leather Qi Charging Pad might be a good option for you.

Price: $16.99
Where to buy: Amazon
Source: The sample of this product was provided by EasyAcc.

Filed in categories: Reviews

Tagged: , ,

EasyAcc 10W PU Leather Qi Charging Pad review originally appeared on The Gadgeteer on June 12, 2019 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Cecilia Lambert 12L camera bag review

REVIEW – My ideal travel camera bag is a messenger/satchel style bag. Whether I’m walking, cycling or riding a motorcycle, this style of bag allows me to easily swing the bag around, get out my camera gear, take the shot, replace my camera and then swing the bag back around. Much easier than having to remove a backpack, open it, get the gear out, close the backpack, put it somewhere, take the shot, replace the camera gear, close up the backpack, put the backpack back on….you get the idea.  In the past I’ve just used standard messengers (e.g Timbuk2) so when Cecilia offered to sent one of their line of camera bags I put my hand up to review. How did it work out?  Read on:

What is it?

Cecilia is an American company with a 160-year heritage in the leather industry, which shows in the quality of the quality materials used in its products. For their camera messenger line, they offer two options: the Tharp 8L  or the Lambert 12L.  Of course, you don’t have to use it as a camera bag, it can also be used as an EDC, something I’ve been doing for the last few weeks during the week and then as a camera bag on the weekends. In the end, I opted for the Lambert as the larger size made it just a little bit more flexible.

Lambert Specification

  • Exterior: 10.75″H x 15.25″W x 5.75″D (27.3cm x 38.7 x 14.6cm)
  • Interior: 10″H x 14.75″W x 4.25″D (25.4cm x 37.5cm x 10.8cm)
  • Weight: 2.75 lb (1.25 kg) (Cotton twill)
  • Weight: 2.8 lb (1.27 kg) (Leather)

What’s in the box?

The Lambert came in a nice reusable cloth bag.  It was really nice not to get something in a plastic bag that’s just going to be thrown away (recycled). I’m sure I can find a use for this bag somewhere in the future.

Design and features

Given their heritage in leather they offer both lines in either a black or chestnut leather and also a charcoal cotton twill. I decided to go for cotton twill as I really like cotton/canvas type bags and I thought it was (to me) more aesthetically pleasing with its charcoal twill and chestnut leather trim. The leather trim on the main flap and on the shoulder pad really offsets the charcoal twill nicely.  The strap is nice and strong and all hardware is painted metal.

On the back is a nice closed cell foam pad for both comfort and or airflow.  On the top of the pad is a zip so that you can use it as a pocket to store say documents or magazines but if you also open the bottom zip then it becomes a pouch to put on the handle of your roller luggage.

Open up the flap and there are 2 big pockets on the front.  Perfect to store all those little bibs and bob that you don’t want tumbling around in the main compartment or that you want easy access to.  There’s also some airflow padding on the shoulder pad.  On the back is a laptop/tablet sleeve for up to a 13.3″. The positioning of this is very handy because you can just open the flap and get your notebook out, especially useful if you’re going through the x-ray machine at the airport.  You don’t have to open the main compartment to get your laptop out for scanning.  When closed the main flap is held in place with magnets.  You can see the two magnets on the bottom of the front pockets. This is great as, while velcro is probably stronger, you don’t get that “RIIIIP” sound when you open the bag.  Nice and discrete especially if you’re taking photos or using the bag in a quiet environment.

The front pockets are nice and big and zippered so things won’t fall out. They’re perfect for things like battery packs or sd cards, a pen, a notebook or similar. For me, they’re big enough that I can fit my whole hand in if I need to “rummage” around in the pocket to find something small.

There are also two pockets on the sides.  They are quite deep and not overly expandable so ideal for a small notebook or your phone.  You wouldn’t want to put something too small in there though as they’d drop to the bottom and would make it hard to get it out.

The bag comes with two “modes”. Firstly there’s secure mode.  Do up the main zipper and no matter what you do nothing will come out of the main compartment.  Again your notebook is in the back of the bag and can be easily accessed in this mode without opening the main compartment.  Also, note the two leather tags on the zippers which makes it easy to access the zippers. Note the 3 round magnets on the top of the main compartment.

The other mode is “shooting” mode.  This is where the magnets indicated above come into play.  With the main compartment unzipped, the corresponding magnets on the flap mean that opening the flap also opens the main compartment.  This is great if you’re in a situation where you’re putting your camera in and out of the bag frequently. You get quick access to the main compartment and your equipment without having to muck around. The inside is nicely padded and has a soft fleece lining. Because of the foam padding the bag stands by itself.

Equipment

So there’s my collection of camera gear I normally carry around with me: a Panasonic G3 micro 4/3rd mirrorless,  2 Takumar circa 1970s prime lenses passed down  to me from my father ( 50mm/f1.4, 25mm/f2.5)  the standard Panasonic 14-90 zoom, a Nillkin flash (hardly use), my Gorilla pod  and a Canon S120.  A bit of a sad collection of (old) gear for a Gadgeteer to have, but they do the job and do it well.

Inside is three removable velcro attached dividers. When I use a messenger, everything just “rattles around” in the main compartment meaning I have to rummage around to find what I want. In this system, everything in its place and a place for everything.  Additionally, the bag being padded means that I can put all my gear in “naked” whereas with a standard messenger each component goes into some sort of individual protection. This makes it quicker and easier to grab and use something and then put it back in the bag.

What I like

  • I really do like the cotton twill with leather trims.
  • The foam back pad makes it comfortable to carry.
  • The compartments and padding make it easier to store and use my equipment.
  • The “secure” and “shooting” modes are really convenient.
  • It’s easy to get access to your notebook/tablet.
  • The bag stands by itself.
  • When used as an EDC rather than a camera bag, it limits how much I carry (12L).

What needs to be improved

  • With my previous canvas/cotton bags, the bottom corners tend to be the first to go. Given their heritage of leather, perhaps some leather corner protectors would add some additional protection and longevity.
  • Having a briefcase/grab handle would make it just a little bit more versatile on the go.
  • While the twill is coated to make it water resistant, if it got caught in a big downpour, your expensive camera gear would get soaked and water would stay in the padded foam.  A (built-in?) rain cover would protect against this. 
  • You can see the magnets are imprinting on the twill. Not sure what will happen longer term.

Final thoughts

As mentioned, I’ve been using this as an EDC for work during the week and carrying around my Surface Pro, an umbrella, my lunchbox, and various little bits and pieces.  As an EDC, this is a great bag for that.  However, because it’s a fix shape and size as an EDC for me it’s not flexible enough. Often a package might arrive or I need to take some additional stuff to or from work so I need a more flexible size/shape bag.

During the weekend however, it’s been used as a camera bag.  My biggest disappointment is that I don’t have enough gear to properly fill the bag 🙂 That being said, the smaller amount of gear makes it much easier to see, grab and use the correct gear.

These aren’t the cheapest bags around but they’re well thought out and well made, and if you’re looking something a bit fancier than that old ballistic nylon bag these certainly fit the bill.

Price: $289 – Cotton Twill / $439 – Leather
Where to buy: Direct from Cecilia
Source: The sample of this product was provided by Cecilia.

Filed in categories: Reviews

Tagged: ,

Cecilia Lambert 12L camera bag review originally appeared on The Gadgeteer on June 11, 2019 at 10:07 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

LEVOIT LV-H134 Air Purifier review

REVIEW – When you combine a pet with a wife that has asthma, you’ll find yourself in need of air purifiers. The chance to review the Levoit LV-H134 Air Purifier came along and I couldn’t wait to give it a try.

What is it?

The Levoit LV-H134 Air Purifier is a large air purifier with a true HEPA filter that is capable of filtering a very large room.

What’s in the box?

  • Levoit LV-H134 Air Purifier
  • Power cord
  • Quick Start guide and warranty info

Hardware specs

  • Rated Space: 710 ft2 / 66 m2
  • Air Flow: CADR rating of 312 CFM (530 m3/h)
  • Item Weight: 27.7 pounds
  • Dimensions: 12.5″ W x 12.5″ D x 29.5″ H

Design and features

The Levoit LV-H134 Air Purifier is certainly a large unit, and as such, it can filter a lot of air without making as much noise as smaller units. Unlike smaller units that I’ve had, this one moves so much air at the high fan setting that you can actually feel the airflow in the room, something my wife really likes. At 29.5″ tall, it will be primarily a floor based unit for most people, however, I found that putting it on my fireplace mantel was a nice location for it. The unit has wheels on the bottom to make moving it easier, although I didn’t feel as though it was so heavy that it would require it.

The filter is 14″ (35.56 cm) tall and 10.5″ (26.67 cm) in diameter, its installation was as easy as pulling the door open, sliding in the filter, and popping the door back on. This is a large filter and the unit is designed to take in air 360°, fully utilizing the cylindrical filter design. The filter is rated to remove 99.97% of airborne particles as small as 0.3 microns including Allergies and pets, smokers, mold, pollen, odor, mold and dust. The filter construction has a fine screen on the outside to trap large particles such as hair, dander and dust. The main part of the filter has a true HEPA filter, and the inside has activated carbon to handle odors.


One of the neat features of this unit is that it has an indicator ring on the display that changes color based on the quality of the air. Red = Bad, orange = moderate, green = good, and blue = very good. During use, it has run at blue most of the time and only occasionally displaying green. The laser sensor for this feature seems to be located after the air has been filtered and detects the number of particles in µg within a cubic meter within 30 seconds for real-time air quality feedback.

The touch display makes operation easy, a light touch is all it takes to change settings. It has three fan speeds, an auto setting, a sleep setting, display brightness, filter replacement warning, and a timer function that will turn off the unit in 1 to 12 hours.

The lowest fan speed only produces 25dB noise that you can hardly hear. The auto mode adjusts the fan speed settings automatically according to the real-time air quality while saving energy. The top of the unit features a fin design that optimizes airflow throughout the room. The unit draws in air at the bottom and expels filtered air out the top.

I’ve got several smaller air purifiers, but they don’t move nearly as much air and are not as easy to operate as the Levoit LV-H134 air purifier. I’m so happy with it that I’ll probably get one of their smaller units for our home offices.

The filters are rated for about 6 months and currently cost $64.99.

What I like

  • Moves a great amount of air
  • Air quality display
  • Large filter
  • Ease of operation

What needs to be improved

  • Nothing that I can think of.

Final thoughts

I’m really pleased with the Levoit LV-H134 air purifier. It really helps clean the air as well as move air around the room to keep it from feeling stagnant.

Price: $399.99
Where to buy: Amazon
Source: The sample of this product was provided by Levoit.

Filed in categories: Reviews

Tagged: ,

LEVOIT LV-H134 Air Purifier review originally appeared on The Gadgeteer on June 11, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Targus CityLite Pro Compact Convertible Backpack review

REVIEW – Continuing in the trend of “commuter packs that can hold any screen, so long as it’s skinny”, we’ve got a new contender from an old friend. Add to the required main large, narrow screen sleeve a flexible set of pockets and versatile straps, and you’ve got a winner. This one is from Targus, one of the oldest laptop case makers I’m aware of. Presenting their CityLite Backpack.

What is it?

Streamlined on-the-go style, laptop protection, and backpack-to-briefcase carrying for wherever your day may take you. That’s the website’s tagline, and it fits. You can carry this as a tote, a briefcase, a sling or wear it as a backpack. Let’s dig in.

What’s in the box?

Just the bag.

Hardware specs

  • Works With 16″ Laptops and Under
  • Capacity – 13 Liters
  • Weight – 1.94 lbs
  • Dimensions – 12.60″ x 17.31″ x 4.32″ (W x H x D)
  • Laptop Compartment – 9.84″ x 13.78″ (W x H)
  • Tablet Compartment10.50″ x 11.50″ (W x H)
  • WarrantyLimited Lifetime Warranty
  • Multi-fit cradle fits 12” – 15.6” laptops
  • Tablet pocket fits up to 12.9″ devices
  • Tuck-away shoulder straps to convert backpack to briefcase
  • Contoured, padded shoulder straps & air mesh pack panel for comfort
  • Hideaway bottle pocket
  • Interior file divider and two zippered compartments
  • Trolley pass-through luggage strap
  • Metal hardware with soft-touch zipper pulls

Design and features

The CityLight is a minimal pack with maximal yearnings. There’s only a sleeve back pocket, a central pocket that zips around 70% of the opening with a dual zipper plus a slender front pocket, but you can carry it any way you want.
The outer shell is a grey ripstop nylon, but the texture is almost a linen feel. It’s a much thicker fabric than a parka or sleeping bag ripstop. Across the bottom of the front, there’s a darker coloring, which looks like some protectant has been applied. There is no seam, and it doesn’t feel different, but the fabric is many shades darker.


The outermost pocket is a generous size, and there’s enough dimension to put in things like a power supply, gloves, or all the stuff from your pants pockets when you’re going through security.
The center section is very accessible and has sides all around like a packing cube. There’s a slash pocket across the back that could hold a magazine or some files. It’s not too tight, as these things tend to be. The cover that zips out of the way has a net pocket with a zipper that could hold cables, wallet, or an iPad mini in a case. Behind that is a larger zipper pocket that goes all the way down to the fold (where the outside zipper stops).


The rear pocket has a three-part sleeve divider that is trimmed across the top in royal blue elastic. The two outer pieces are double thicknesses of the inner material. The center section is a very soft stretch material. A 1.5” webbing security strap extends from the top center and attaches to the divider’s center with a generous patch of hook-and-loop fabric. In front of this is another thin area that would hold a tablet, a portable keyboard, or a sheaf of papers. It’s not thick enough for, say, an umbrella or clothing.

Performance

The flexible nature of the CityLite lends itself well to shifting between a backpack, a sling, a tote, or a briefcase. The straps disconnect individually from the lower corners and can be stored in a panel behind the vented mesh back. For a sling, just connect one of the straps to the lower corner opposite. The briefcase handle, opposite the net water bottle pocket on the right side, as you wear it, pulls out a bit, and has mesh padding underneath, while being stitched and attached flexibly at each end. This makes the load bounce a bit, which makes things seem lighter. The haul loop, which offers tote-bag style carrying is probably the least comfortable of the four carry methods. The handle is 1″ webbing with no padding and no give.

What I like

  • Generous cradle holds everything from gamer laptops to iPads
  • Laptop and tablet space available
  • Straps can be used in several ways
  • Flexible hidden net pocket for a drink bottle, small items, phones, etc.

What needs to be improved

  • Front pocket is kinda small, for those wanting longer days.

Final thoughts

I’ve used Targus cases off and on for decades. Their guarantee and customer service is first class. (I’ve had 3-year-old bags be replaced for no charge for customers.) This kind of support over the long haul is rare among bag manufacturers

Price: $74.99
Where to buy: Targus and Amazon
Source: The sample of this product was provided by Targus. You can visit them on Facebook and Twitter too.

Filed in categories: Reviews

Tagged:

Targus CityLite Pro Compact Convertible Backpack review originally appeared on The Gadgeteer on June 11, 2019 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Padmate PaMu Slide TWS earbuds review

REVIEW – Wireless earbuds are being released and changed at a rapid rate. Only two years ago, there were few options. Now, companies seem to bring out new styles and feature-sets daily. Today’s model is the Slide, from PaMu. This is the third set of totally wireless earbuds I’ve reviewed from this company, and they are all different. Let’s get to it.

What is it?

A set of wireless earbuds with great sound and a really long play time, and, oh yeah, a charging case that can also charge your phone wirelessly.

What’s in the box?

  • Wireless earbuds
  • Charging case
  • Three sets of ear tips
  • USB-A to USB-C charging cable

Hardware specs

  • Bluetooth 5.0
  • Dual Microphone Noise Reduction
  • IPX6 waterproof certification
  • 10 Hours music playback on a charge
  • touch button control

Design and features

The PaMu Slide earbuds are much thinner and lighter than the company’s earlier models. They have plainly taken a clue from the elongated tube reaching down from your ears that the AirPods first popularized, but rather than having a thick cylindrical shape, these are rounded rectangles pulled out of a gumdrop. The size of the units allows the company to give us longer battery life and better fidelity. The company says these have three times the play time, half the power consumption, and eight times the transmission capacity as the Scroll models. The Scroll, by the way, set two IndieGoGo records: most money raised in a TWS earphone campaign ($3,387,480) and most backers ever (62,334). Improving on these statistics will take some doing, but I found the claim believable. PaMu has certainly been learning something in their growth from the first unit, and these are set to start at a $49 backing.

Setup

The setup of a Bluetooth device is Gadgeteer 101, but this one throws you a curve. After you are asked to pair once and agree, you’ll see an identical pairing dialog. The two earbuds are connected to each other but act independently so that you can use only one, yet still have phone and digital assistant connectivity. And they show up in your lists as two different items.


Bluetooth 5 gives these guys a solid connection that will last while I step away and leave my phone on my desk at home, or if I’m around tons of other interference, like others using Bluetooth, or also syncing my keyboard and mouse to the sound source. It’s a very strong link, which means it wants to re-connect, so moving between devices sometimes means unpairing from the previous device. This is a fairly common issue with using Bluetooth devices with multiple sources, however.

Performance

The sound and syncing of the Slide earbuds are great. The sound is full and watching movies, whether streamed or being played from a device, was always in sync. Gameplay was first-rate, too. (The sound from earbuds, even ones of this size, is not as good as over-the-ear headphones or a great set of speakers, mind you. But, for in-ear wireless headphones, these are great.)
The battery charger will recharge the earbuds for a huge number of times. The number “ten hours” was released, but I don’t listen to earbuds enough to time this type of battery life. Let’s just say this: I was not able to have the earbuds run out of power, and the case never “needed” charging, but I charged it every time it got below 2 dots, which wasn’t often.


One of the real super-powers of this unit is the hidden Qi charger in the bottom of the case. If you double-click the button that’s beside the charging port, a light will come on around the button. If you then balance your phone on the case, it will engage charging, and give you 10-15% charge before it stops. It will still have 2 dots for the earbuds at this point, which is one or two full charges, according to the literature. This is a really cool function, in a world where phones are sucking battery life for everything from video and photo duties to playing games and music.


The one thing that really caused issues with these earbuds, however, is that I ‘d wear them while walking from my office to my car, get into the car and plug my phone (the sound source) into my stereo. This would transfer the sound to my stereo for the drive home. I would then remove the PaMu Slides from my ears and place them into their case to charge. No problems so far. I’d drive down the ramps of the deck and when I’d hit the first bump while driving, the Slides would rattle in their case and re-acquire the phone while my podcast keeps playing through the earbuds, not my stereo. By this time, I’m in traffic, and I’m wondering, “Where did the sound go?” The remedy? When I plug in my stereo, I have to unpair the Slides from the phone completely to prevent them from reacquiring the phone. This killed all the joy in my heart every time I tried to use them. I love the PaMu headphones when I’m using them, but once I turn them off, I can’t trust that they will stay off. This is the main strike against them. It’s a deal breaker for me, having to pair and unpair them each and every time I use them.

What I like

  • USB-C!
  • Really long play
  • The phone charging trick
  • Sturdy case

What needs to be improved

  • The loose connection that reactivates the unit’s connection to your device
  • I’d like to see an option to turn off the two-unit pairing, if possible.

Final thoughts

Like many items in today’s tech world, there are occasional fatal flaws. With each iteration, PaMu has shown that they are thinking and iterating well. The first unit had a flimsy cover and the battery case ran out in just a few charges. The Slide has a huge battery that lasts a good long time, and the buds themselves have great batteries as well. If only they would stay in charge mode when you place them in the charger. I’m going to experiment with some tissue or something to try and make them stop reconnecting with every little bump.

Price: $49.00
Where to buy: Indiegogo
Source: The sample of this product was provided by PadMate.

Filed in categories: Reviews

Tagged:

Padmate PaMu Slide TWS earbuds review originally appeared on The Gadgeteer on June 10, 2019 at 12:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.