SCOTTeVEST Hoodie Cotton jacket review


What’s better than a cozy hoodie jacket on a cool day? How about a cozy hoodie jacket that has lots of pockets for your favorite gear? Sound good? Then you will want to read this review of the SCOTTeVEST Hoodie Cotton jacket. Is it too soon in the review to reveal that I love this jacket? 

What is it?

The SCOTTeVEST Hoodie Cotton jacket is a cotton fleece zippered jacket with a hood, and 21 pockets.

Design and features (pockets, pockets, and even more pockets)

The hoodie is made of a cotton/poly blend fabric and comes in Black, Cobalt, Ash, or Maroon. I was sent the jacket in Cobalt. Note that this jacket only comes in men’s sizes. I was sent the jacket in size XS, but sizes go up to an XXXL.

The jacket has a typical hoodie design with long sleeves, a zippered front, and two traditional hoodie pockets on the front.

SCOTTeVEST’s branding on the jacket is minimal, with an embossed logo on the back (it’s actually under the hood in the image above).

And another logo on the left arm.

In the image above you’ll notice the nylon zipper which matches the color of the jacket and has smooth zip and unzip action. The zipper pull is made of metal with a dark gray finish. The hood drawstrings have the same type of metal on the ends.

You’ll also notice the slit in the ribbed cuff. That’s a thumb hole.

Thumb holes help keep the sleeves in place and keep part of your hand warm in cold weather.

When you unzip the Hoodie Cotton jacket, you’ll be greeted with a panel of pockets on both sides. If you’re familiar with SCOTTeVEST jackets, the Hoodie has a similar layout with some of the same features.

Let’s start on the left side of the jacket. Up at the top at the neckline are SeV’s PAN (Personal Area Network) loops and a CollarConnect covered cable run to help you manage the wires of your headphones. There’s also a BudBucket Pocket on each side at collar bone level to hold your earbuds.

Along the edge is a pen or pencil slot and next that is a vertical zippered pocket for your phone that has a mesh panel that allows you to see the screen and even interact with it. I will say that it’s not “easy” to interact with the phone through the mesh panel, but it’s possible.

Below the phone pocket is a zippered pocket that is large enough to hold a tablet like an iPad mini. The pocket is actually large enough to almost hold my Samsung Galaxy S Tab which has a 10″ display, so a 10.5 inch iPad might fit too.

There’s another pocket layered over the tablet pocket what is the perfect size for a Field Notes notebook or a passport.

The right side panel of pockets is almost identical to the left side except that the bottom pocket is smaller and sized more for a pair of sunglasses which is suggested by the embossed icon beside the pocket.

Note that all of the inside zippers are locking zippers. The pull folds over to lock in place to prevent accidental unzipping.

As mentioned before, there are two front pockets on the Hoodie Cotton that look like classic front hoodie pockets, but they hide a few extras. First of all, each one has a top drop zippered pocket that is perfect for your phone, a wallet, and even a small bottle of water.

The main handwarmer pockets have a separator panel so you can put items like your keys in front the panel and your hands in the back or visa versa.

There are also some small Velcro pockets for coins or a key. And the right pocket has a lanyard coil for your keys.

The large hood has a built in do not disturb eye cover so you can take a nap on a train, plane, etc and not worry about someone bugging you. I really love this feature, but I do wish that the do not disturb eye cover had some small magnets or velcro to keep it attached to the inside of the hood. As it is designed, only one edge is attached to the front of the hood. The rest of the eye cover just floats inside the hood.

The SCOTTeVEST Hoodie Cotton fits well even though it only comes in men’s sizes. I am 5’6″, 128 lbs give or take and the XS fits me fine.

My favorite feature are the top down zippered pockets because they let me quickly access my phone.

Final thoughts

As I already said at the very beginning of this review, I love the SCOTTeVEST Hoodie Cotton jacket. It’s warm, soft and cozy enough that I could easily sleep in it. It’s kind of a bummer that it’s summer because I haven’t had a lot of opportunities to wear it now that it’s warmer outside. I did wear it a few weeks ago when I was on vacation and visited Indiana Caverns for a cave tour. The cave was about 50 degrees and this jacket kept me at the perfect temperature and kept all my gear organized in their own pockets.

Next to the SCOTTeVEST Lola jacket, the Hoodie Cotton ranks right up there as one of my all time favorite SeV garments. The price is nice too. If you love hoodies, I know you’ll love this one.

Source: The sample for this review was provided by SCOTTeVEST. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $95
Manufacturer: SCOTTeVest
Retailer: Amazon
Pros:
  • Soft and cozy
  • 21 pockets!
  • Well made
Cons:
  • None

Filed in categories: Reviews

Tagged:

SCOTTeVEST Hoodie Cotton jacket review originally appeared on on June 26, 2017 at 5:30 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

StarTech USB/SATA Drive Duplicator and Eraser review


The StarTech Drive Duplicator and Eraser for SATA and USB Flash Drives is a powerful, simple to use, and versatile tool for IT professionals or consumers who routinely need to manage a number of different types of data drives. Although it’s lacking in documentation and is a bit expensive at the suggested retail price of $796.99, the Drive Duplicator can replace a standard computer tasked with the same operations.

The Drive Duplicator comes in standard StarTech packaging, no frills and well-protected with clear indications of the product functions.

What’s in the Box

  • 1 – SATA/USB duplicator and eraser
  • 1 – 12v DC Power supply
  • 4 – Universal power adapters (NA/JP, UK, EU, ANZ)
  • 2 – Drive-connector cables
  • 2 – Drive pads
  • 1 – Quick-start guide

The unit comes with five different types of international power cables, including two for the U.S., one with a ground plug and one with a wired ground.

The design of the unit speaks much to the functioning of it, simple and direct. A glossy back top with four membrane buttons, an LCD screen and 12 LED indicator lights is met on the sides by a textured hard plastic casing.

 

Both sides of the unit have connections for USB 2.0 and standard 22 pin SATA drives. You can use 2.5-inch and 3.5-inch SATA SSDs or HDDs with the unit. The top of the unit has the connection for the power plug and an on/off rocker switch.

To be honest, the rocker switch causes me a lot of anxiety as it can easily be knocked into the off position during vital operations.

The connections on either side of the unit are clearly marked Target and Source. There are separate LED indicator lights (yellow, green and red) for each input.

The quick-start guide recommends always using the included SATA drive connector cables when connecting SATA drives to prevent damage to the SATA connectors on the unit and the drives themselves.

Soft, mousepad-like “drive pads” are also recommended for use when using SATA drives.

For my SATA testing, I used two identical 120gb SSDs connected via the drive connector cables.

For USB testing I used two identical 2gb USB flash drives.

With SATA drives and power plugged in, the unit takes up a good bit of space and is rather unwieldy. Although, considering that it can replace a computer doing the same functions, it’s a small caveat.

All operations are controlled via menus on the LCD screen and the membrane buttons. The menus take a little getting used to at first, but for basic functions like copy and erase, the process is pretty simple to activate. The LEDs indicate drive functions; yellow indicates that the drive is connected correctly, green indicates that activity is occurring, and red indicates that an error is occurring.

The Drive Duplicator supports six erase modes and four copy modes as well as cross-interface support allowing you to copy SATA-to-USB or USB-to-SATA.

One of the most useful functions of the unit drive erasure. I use it daily to wipe USB flash drives that come out of usage rotation and for wiping SATA drives that are being put into new machines. The unit provides you with six different erase modes. The one I use the most is the basic Quick Erase mode, but it also includes Single Pass Overwrite (Full Erase), 3-Pass Overwrite (DoD) Erase, 3-Pass Overwrite and Compare, Secure Erase and 7-Pass Overwrite. The 3-Pass DoD Overwrite is compliant with the U.S. Department of Defense (DoD) secure erase standard; the drive is overwritten three times to make sure data is completely wiped.

The default modes on the unit have a failsafe in place to protect the Source drive from being erased, but with a little trip through the menu-tree you’re not only able to erase a single SATA or USB drive, but two drives simultaneously.

As you can imagine, with bigger drives the multiple overwrite modes take significantly more time. But, as with the copy modes, since the unit’s functionality is hardware based as opposed to software based, it’s still faster than comparable operations on a computer.

For copying, the drive duplicator provides four duplication modes; Quick Copy, All Partitions, Sector-by-Sector (Whole Drive) and Percentage Copy. Again, like erasing, the mode I use the most is Quick Copy. Copy times between SATA drives are very impressive, but when duplicating USB drives, the lack of USB 3.0 support becomes painfully obvious.

At smaller sizes, the copy times aren’t much of an issue, especially in Quick Copy mode. However, when utilizing the cross-interface duplication (SATA to USB or USB to SATA) it would be really useful to be able to access the higher speeds that USB 3.0 offers.

Despite the lack of USB 3.0 support, the copy modes of the unit are still incredibly useful. The compare function of the duplicator is particularly helpful as it checks the drives after a copy has finished to make sure the copy operation was successful. Keep in mind, with any copy mode, the target drive must be the same size or larger than the source drive.

Sector-by-Sector mode is great for creating an exact replica of a source drive. All data and empty space are copied to the target drive so even hidden partitions will be duplicated. I use this mode a lot for testing purposes, creating a backup of an entire drive for safekeeping before I work on the original drive.

Overall, the StarTech USB/SATA Drive Duplicator and Eraser is a great, super useful device with a ton of functionality. Although the suggested retail is $796.99, I found it for significantly cheaper at a number of different outlets. At any of these prices, it’s still a great buy because it basically replaces an entire computer running the same operations. Plus, the Drive Duplicator is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Specifications

  • Product ID: SU2DUPERA11
  • Product Weight: 15.9 oz [450 g]
  • Product Measurements: Length: 5.3 in, Width: 3.5 in, Height: 1.1 in
  • Power Source: AC Adapter Included
  • Drive Connectors: 2 – 22 pin SATA Data + Power (7 + 15 pin) Receptacle, 2 – USB Type-A (4 pin) USB 2.0
  • Maximum Data Transfer Rate: 6.6 GB per minute
  • Drive Size: 2.5in & 3.5in
  • Compatible Drive Types: SATA & USB Flash Drive
  • Warranty: 2 Years

Source: The sample for this review was provided by StarTech. Please visit their website for more info and Amazon.

 

Product Information

Price: $796.99
Manufacturer: StarTech
Retailer: Amazon
Requirements:
  • 2.5/3.5” SATA SSDs/HDDs or USB attached storage
Pros:
  • Versatile
  • Supports any operating system
  • Basic functions are simple to use
Cons:
  • Expensive
  • No USB-3.0 support
  • Minimal Documentation / Instructions

Filed in categories: Reviews

Tagged: ,

StarTech USB/SATA Drive Duplicator and Eraser review originally appeared on on June 26, 2017 at 10:24 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Julie’s favorite gear, LG G6, Treblab XR100 headphones, and more – Review updates


I have five quick review updates for you this week of reviews that I’ve posted in the last 2 years. Why go back and update old review? Because we like to follow up with updates for products that we continue to use well after the original review has been posted. This gives people a good idea of how a product stands up over time. So click through for the list of recently updated reviews and then scroll to the bottom of each review to read the newest update.

Peak Design Everyday Messenger bag review by Julie Strietelmeier
Nexus 6P review by Julie Strietelmeier and Dave Rees
LG G6 review by Julie Strietelmeier and Judie Stanford
Julie’s Favorite Gear
Treblab XR100 Bluetooth headphones review by Julie Strietelmeier
Moshi Audio Clarus earphones review by Julie Strietelmeier

 

Product Information

Price:

Filed in categories: Reviews

Tagged:

Julie’s favorite gear, LG G6, Treblab XR100 headphones, and more – Review updates originally appeared on on June 26, 2017 at 8:51 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Sandisk Connect Wireless Stick review


Most smartphones and tablets do not have expandable memory. One way around this is to purchase the device with as much built-in memory as possible. But for those of you that didn’t think that far ahead when you bought your device and now find that storage space is low, you might want to consider a solution like the Sandisk Connect Wireless Stick.

What is it?

The Sandisk Connect Wireless Stick is a USB flash drive that allows you to wirelessly transfer and access your photos, videos, and files with your mobile device, Windows PC or Mac computer via WiFi or the USB port.

Design and features

The Connect Wireless Stick looks like a slightly oversized USB flash drive that we’re all familiar with. It has a black plastic case with molded facets that give it a cool look and feel.

One end of the stick has a removable cap that reveals a standard USB 2.0 connector that is used to charge the stick’s internal battery and to transfer files to a computer. On the other end of the Connect Wireless Stick is a lanyard attachment slot.

There’s also a tiny status LED on top and something which you don’t normally see on a flash drive which is a power button.

How does it work?

The Sandisk Connect Wireless Stick is available in capacities from 16GB up to 256GB and works just like you would expect a flash drive to work. You can plug it into your PC or Mac computer and save and copy files to it.  But the stick can also create its own WiFi hotspot that you connect to with your mobile device using the Sandisk Connect app to transfer or stream files to and from your mobile device.

To use the stick, the first step is to install the Sandisk Connect app on your iOS or Android device. I tested the Connect Stick with my LG G6 Android smartphone.


After the app is installed, and the stick has been charged by plugging it into a USB port, you can press the power button on the side of the stick and launch the app. The app will detect the stick and connect to its WiFi hotspot.



The stick has some files already saved on it to give you an idea of how to use it. There is a music, video, and photos folder, but you can create other folders and transfer other file types too.


In the Connect Wireless Stick settings, you can set a password to protect the stick and a timeout setting to automatically turn off power when the stick is idle.

You can also enable the photo backup feature that will save the images in your device’s photo gallery to the stick. This can come in handy if you don’t use Google’s Photo’s backup feature or back up your iOS photos to iTunes.


Copying files to and from the stick from your mobile device is as easy as selecting the files and telling the app which folder to place them.

Transfer speed did feel a little slow though. It took a few minutes to copy a 211MB video file stored on the phone to the stick.

You can even access the contents of the Sandisk Connect Wireless Stick from a web browser on your PC or Mac. You have to be connected to the Stick’s WiFi network to use this feature.

Since I have a 12″ MacBook that only has a USB Type-C connector, I used the web browser option to access files on the Stick from my Mac. I even streamed a 211MB video on the stick through my MacBook which worked pretty well, but there were a couple 1-second pauses at the start of the 2-3 minute video. I don’t know if this was the fault of the stick or my phone. When I tried it later, there were no pauses.

The Sandisk Connect Wireless Stick can stream music and video to 3 devices at a time. I tried streaming two different videos to 2 different devices and the same video 2 devices at the same time. One time there was a 1-2 second pause at the start of playback, but for the most part, it video streaming was stutter free.

Final thoughts

One of the best things about the Sandisk Connect Wireless Stick is that it works anywhere because no internet or cables are required. The only issue with this is that while your mobile device is connected to the stick, it isn’t connected to its primary WiFi hotspot. If you are using a phone, you can still use your regular cellular data connection though.

The Connect Wireless Stick is really easy to use and its size makes it extremely portable. The only thing I’d like to see would be a Type-C version of the stick, but other than that, it’s a handy accessory that makes it easy to expand device memory without wires.

Source: The sample for this review was provided by Sandisk. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $23.49 – $197.49
Manufacturer: Sandisk
Retailer: Amazon
Pros:
  • Easy to use
  • Transfer files without cables or the internet
  • Automatically backs up your camera roll when connected
Cons:
  • File transfers from mobile device to Connect stick is slow

Filed in categories: Reviews

Tagged: ,

Sandisk Connect Wireless Stick review originally appeared on on June 25, 2017 at 1:44 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Gearbest Cube WP10 4G Phablet review


Phone, tablet, phablet. The market parlance around these three items is somewhat murky, but I’m still not sure there are folks for whom a phablet isn’t a better device than a phone. To test this theory, I volunteered when Julie offered the team the Gearbest Cube WP10 4G Phablet, a Windows 10 tablet with phone service. I got it and have done a few months of testing, and am ready to report back to you folks.

Note: Photos may be tapped or clicked for a larger image.

First off, I’m going to offer a working definition, fresh from Wikipedia:

Current phablets typically have a diagonal display measurement between 5.5 inches (140 mm) and 7 inches (180 mm), assuming a 16:9 aspect ratio. In comparison, most flagship smartphones released in 2016 have a screen size of around 5.5 in (140 mm), with larger versions of mainstream flagships (such as iPhone 7 Plus, Pixel XL, and Samsung Galaxy S7 Edge) using 5.5 in (140 mm) displays. 

The Cube is a Windows 10 Phablet which has a dual SIM port, wifi, and bluetooth. The Windows 10 software is supposed to be the same as what you’d run on a desktop or laptop, but I found major shortcomings with this (more later). As for physical specs, it is a flat slab 7.25″ x 3.75″ x 0.375 ” (185 mm x 97mm x 8mm). The screen measures right at 7″ diagonally. The face has the familiar earpiece at the top center, with the “selfie” camera lens to the left. There are two other sensor openings above the camera lens, one of which I’d think would be a proximity sensor to turn the screen off when it is up to your face. The other may be a focus assist.

 

 

 

 

 

 

 

 

 

 

 

Here are the specs as listed online:

OS Version: Windows 10 (licensed)
CPU: Qualcomm MSM8909
GPU: Adreno 304
Processor Speed (max): 1.3GHz
RAM: 2GB
Internal Memory: 16GB
External Memory: Support for up to 128GB
Display Size: 6.98 Inch IPS
Display Resolution: 1280 x 720

Frequency:

  • 2G: GSM 850/900/1800/1900MHz,
  • 3G: WCDMA 2100MHz,
  • 4G: FDD-LTE 1800/2100MHz
Bluetooth
GPS
Sensors: Gravity
Mic and Speaker
Battery 
Size: 2850 mAh
Continuous Usage Time: up to 3 hours (video playing time)
Battery Standby: up to 48 Hours
Charging time: about 2 hours
Wi-Fi: 802.11 b/g/n
2 Megapixel Front-Facing Camera
5 Megapixel Rear Camera
Video resolution: 640 x 480 front/1280 x 720 back
Ports
Micro SD card slots: up to 128GB
Dual (GSM+WCDMA+FDD LTE)
2x Nano SIM Card Slot
Micro USB
3.5 mm audio out port
Languages - English, Chinese (simp), Chinese (trad)
Media Formats
Video: MOV, MP4, AVCHD
Audio: AAC, MP3, WMA, WAV, M4A
Graphic: JPG, JPEG, GIF, BMP, PNG
Dimensions:
Main Product Dimensions: 185x 95x 6mm (L x W x D)
Main Product Weight: 250g

As shown in the photo above, I’ve been using an iPhone 6s Plus (on the left) for almost two years now, and enjoy the large screen much more than I ever thought I would have. But my use of the device itself has changed a lot since the release of the original iPhone in 2007. In short, I rarely actually talk on the phone. I especially only rarely hold it up to my ear and chat with someone on the other end. I use the speakerphone, ear buds, headphones, or text/email/chat quite frequently, but almost never phone-to-face talking. Using the Cube Phablet (on the right, above) held to the ear brings with it the social anxiety of having something that large up by your face. (I have a few friends at work for whom this would not be an issue, though. Their reactions were much more positive than the less height-gifted of my circle of friends was.)

Above, I compared it to the devices of some friends one night at dinner. Top to bottom, that’s a traditionally sized iPad, iPad mini, the Cube, iPhone 6s Plus, iPhone 6, and iPhone SE. Stacked, below, top to bottom are the same devices, in reverse order.

Everyone noted how light it was, compared to the mass it appears to be. The screen is also very clear and bright. The In Plane Switching (IPS) makes the screen readable easily from angles other than straight-on.

The cameras, despite the specs, suffered a bit from poor light management. Here are two photos of the same area, taken seconds apart. Both were on automatic, with onboard flash enabled.

First the Cube:

Then my iPhone 6s Plus:

Obviously, the pictures differ widely, due to the sensor on the iPhone being larger, but I found the colors and details, for a 5-megapixel camera, very good. Even the 2 mph front facing camera isn’t too shabby (children should be removed from the room before scrolling further down.):

I found typing on the touchscreen pretty standard for typing on a slab of glass. I’ve gotten pretty good at it. The layout was easy to get used to, and there were only a few pauses with keyboard buffer overruns. I connected to my Live account and was able to read and write to Office 365 documents without problems. (None of the files are sizable, but the formatting issues and fights with the display of fonts seem to finally be in the past!)

I was continually irritated by the fuzziness of the touch targets, however. Tapping a button or a line of text to edit were frustrations that never went away during my testing. Trying to just select a certain word for editing took far longer than it should have. (Remember, I’ve been using my fingers to edit text for almost a decade now, so it’s not like I don’t know how to tap a screen!) I paired my Apple Trackpad with the Cube, and having the cursor show up on screen was fantastic. It’s a bit of trouble to use that when walking down the street, however.

The dual SIM port is a nice touch, but the SIMs need to be micro, not nano. Once I got an adapter for the nanoSIM I carry, I didn’t have any issues getting online, making calls, or texting, but all my Apple friends kept asking me why my texts were green, instead of blue.

The real reason I couldn’t continue using this device is even more fundamental – the quiet little earphone speaker doesn’t really give any notice that your phone is ringing, or even that you’re getting a text unless you are in a very quiet environment. Vibration is fine, but sometimes, you need to hear the ringer. Sure, it’s easy to plug-in a set of headphones or earbuds, or even an external speaker, but that’s not appropriate everywhere. Setting up a Bluetooth speaker was easy, but I never found one that didn’t have a slight blip in the sound stream every 10-15 seconds during playback on video. Spotify seemed to work fine and allowed me to both save music to the device and stream music directly, but there’s always that little background blip every few seconds.

Video playback was fine on YouTube (via the web) and some Netflix videos, but occasionally, I’d get an error that the encoded video was not authorized for my device. The marketing blurbs say this is a fully licensed version of Windows 10, but it seems some sites take issue with it from time to time.

As funny as it sounds, me being an Apple guy and all,  I really wanted to like this phablet. Being as pocketable as it is (for a tablet), it’s a great size if you want to have something that you can walk up to a desk with and plug into a monitor, mouse, and keyboard. But, alas, there is no port for a display hookup. There is a setting for wireless connection to a display, but I don’t have anything that can take advantage of that.

So, bottom line: we’ve got a nicely designed package with a good screen, good weight distribution, and that passes the famous Gadgeteer “creak” test fully. It has easily-accessed SIM card slots and can handle two SIM cards at once. It is, however, hampered by a few things.

First, there needs to be a better speaker, as well as better sound over Bluetooth.

Second, there needs to be a video output, so that users can access things like HDMI, DVI, or even just VGA.

Third, Microsoft needs to decide if Windows 10 is going to be the same as on your desktop/laptop, where you can download printer drivers, keyboard drivers and the like and run the .exe files to install them. If not, the manufacturers of those peripherals need to start writing for this version of Windows specifically and provide the needed drivers in a version this OS can use. It does no one any good to say “works just like Windows on your desktop” and then delivers this substandard subset of the features everyone takes as a given and uses on their “real” Windows computers.

Fourth, the store experience was a bit off. I was not able to find normal apps like Cortana, YouTube, or any of a myriad apps that we have become accustomed to in the current world of smartphones and tablets. On iOS or Android, if I want, say, the Instagram app, I go to the store and it’s there. With this phone (and I’m not fully sure if it’s because of the Chinese manufacturer of the device or a shortcoming of the Windows store), there is nothing. Or, worse, there is a closely-named app by some third party that has a similar icon. That’s not a good experience, since sometimes, that means your personal data is being collected by the party that wrote the rogue software, and other times, actual accidental functions by a well-meaning developer seeking to fill the gaps may compromise, corrupt, or delete your data on these services.

In the Apple world, there is MacOS and iOS, and they are totally different, despite loads of shared DNA. In the Alphabet/Google arena, there is Android, and users of ChromeOS, Windows PCs, Linux and Macs alike run this on their devices, and are able to make the switch mentally from “phone” to “computer.” Microsoft, the “Windows Everywhere” thing is not happening. Running this OS is NOT the same as running Windows 10 on a desktop/laptop. The quicker you admit it and either develop a true mobile OS or make it actually work, the better it will be for the marketplace. But saying it’s the same when it’s not doesn’t make it so. It’s making me curious as to how the Surface devices handle their OS.

But for this device, I have to say it’s “No Go.”

Source: The sample for this review was provided by Gearbest. Please visit Gearbest for more info.

 

Product Information

Price: $109.99
Manufacturer: Cube
Retailer: Gearbest
Requirements:
  • Phone service with microSIM, or nanoSIM with adapter
Pros:
  • Excellent build quality
  • Nice placement of buttons
  • High quality display
Cons:
  • No speaker other than receiver
  • Glitch in sound playback over Bluetooth
  • No port for video out
  • Unable to run installers for printers, keyboards, mice, etc.
  • Video services sometimes did not allow access

Filed in categories: Reviews

Tagged: ,

Gearbest Cube WP10 4G Phablet review originally appeared on on June 24, 2017 at 9:02 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.