Furbo Dog Camera review

The Furbo Dog Camera is a fun way to monitor and interact with your pet remotely. At $249, it’s a little more expensive than most similar remote pet feeders, but it does have some extra features like bark detection, night vision, and a stylish design.

The Furbo arrives in a nicely design box which displays the unit on the front and basic feature list on the back.

The designers of Furbo paid close attention to the overall aesthetic of the product and this is also represented well in the packaging design.

Package Contents

  • Furbo Dog Camera
  • Micro USB power cable
  • Furbo power adapter
  • Quick start guide

The Furbo is powered by an included Micro-USB cable and a power adapter.

The only port on the Furbo is the Micro-USB power port on the back of the unit.

Setup for the Furbo is pretty straightforward. The first step is to download the Furbo app and create a new account. Once the app is ready, plug in the Furbo and wait for it to start up. The Furbo has a colored LED status indicator on the front of the unit. When the LED lights up green, you’re ready to begin. The LED will turn white for starting up, blue when in use, purple for no WiFi connection, yellow for standby mode and green for ready to set up.

After setting up your Furbo to connect to your WiFi, the Furbo app will walk you through the steps of acclimating your dog to the Furbo and how to operate it. The next step is to make sure your Furbo is filled with delicious treats for your furry friend.

To fill the Furbo, you need to remove the lid. One stylish design element of the Furbo that I really like is that the lid is made from natural bamboo. It’s a nice flourish and, more importantly, the lid has a rubber seal to keep the treats fresh for your pup.

In my testing, the setup was flawless up to this point. The manufacturer has very clear instructions on what size treat should be used with the Furbo, specifically “round shaped treats with a diameter around 0.4 inches”. I first chose to go with some small training treats that my dog, Addy, loves. I broke them up a bit more to make sure they would fit in the unit.

There’s a “max fill” indicator inside the unit that’s pretty hard to miss to help avoid overfilling. The Furbo doesn’t hold a lot of treats, but there’s enough room to hold about 20-30 pieces of kibble.

The Furbo works by activating a small plunger that pops up and knocks a few treats at a time through the dispenser hole and out the front of the unit.

My first treat dispensing test went fine, but on the second run the unit promptly jammed. I’ve read several other reviews that mentioned jamming issues, but I was surprised it happened this quickly.

The jam was a lot worse than I first realized and while trying to free the offending treat, a piece of the internal plunger came loose.

After about 30 minutes spent disassembling the unit under the hungry stares of Addy, I was able to remove the jammed treat and reset all of the pieces of the unit properly.

Moving forward, I played it safe by using Addy’s kibble as treats. She already loves it and they met the size specifications indicated by Furbo.

The following tests of the unit went very well and aside from some small jams that were easily fixed, we haven’t had any other dispensing problems.

The Furbo can be placed anywhere in your living area and there is 3M double-sided tape on the bottom to help keep inquisitive noses and paws from knocking the unit over in search of treats.

The camera on the Furbo is great for monitoring your pet during the day and making sure all treats are received, but its video quality leaves a bit to be desired. The camera is 720p with a 120° wide-angle lens and automatic night vision. There’s also a built-in microphone and speaker so you can speak to and soothe your pet. Like the camera, the quality of the mic and speaker are a bit subpar, but they do the job.

The speaker plays a short sound before each treat is dispensed, which helps to prepare your pet for the yummy arrival. A great option is the ability to record your own treat sound to personalize the experience a bit. The mic can also be set to monitor continually for barking. When the Furbo senses barking, it will alert you via the app so you can calm your pup or assess the situation. I didn’t have much luck with this feature. Even after adjusting the sound sensitivity via the app, the alert was still easily triggered by ambient Brooklyn noises.

The Furbo app can take stills and videos of your pet while you’re using the app. There are no cloud services or timeline recording options like on devices such as the DropCam.

You get the live-view only when you have the app open, there isn’t a web version, so all treat dispensing has to happen via the app.

The screenshots and videos are of good enough quality for sharing via social media, but that’s about it.

The app itself is well done, but a bit cartoony for my tastes. You activate the treat dispensing by clicking on the treat symbol. The small size of the treats I used meant that three or four treats were dispensed at a time, but Addy didn’t seem to mind at all. There are clear icons for adjusting settings, switching between stills and video, and for activating the mic.

One problem I did have was that once Addy realized the little white thing on the floor was a source of treats, she spent a lot of time watching it, waiting for it to deliver something yummy. But, that’s more of an issue with my particular furry friend than with Furbo.

Overall, I liked the Furbo and found it was a fun way to interact with my dog while I’m away at work during the day. There are some shortcomings when it comes to the technology, especially at the higher price point of $249, but if you’re willing to spend the money and make sure you don’t use treats that may jam it, the Furbo is a great way to have some fun with your furries.

Specifications

  • Size: 5.91×4.72×8.86 inches (15x12x22.5cm)
  • Weight: 1.76 pounds (800g)
  • Camera: 720p HD, 120° wide-angle lens, 4x digital zoom, automatic night vision
  • Audio: Built-in speaker, high-quality microphone
  • Treat capacity: 30 pieces Recommend round shaped treats with a diameter around 0.4 inches; (1cm) .
  • Power: 100-240V, 5V2A
  • Connectivity: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth Low Energy (BLE)

Source: The sample for this review was provided by Furbo. Please visit their website or and use this link to save $15 of the purchase price.

 

Product Information

Price: $249.00
Manufacturer: Furbo
Retailer: Amazon
Requirements:
  • Broadband internet connection
  • Wi-Fi
  • Available power outlet
  • iOS 8 or newer
  • Android 4.3 or newer
Pros:
  • Fun to use
  • Easy way to monitor pet and home
Cons:
  • Prone to jamming
  • Mic/Speaker inconsistent
  • Expensive

Filed in categories: Reviews

Tagged:

Furbo Dog Camera review originally appeared on The Gadgeteer on August 20, 2017 at 9:19 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Turtle Beach XO THREE gaming headset review

If you are a serious console gamer you have probably heard of Turtle Beach. Turtle Beach has been one of best-known gaming headset makers around. If you’re not a gamer you may not understand the importance of having a good headset, especially when playing PVP (Player VS Player) type games. I will admit that I have always been a little envious of Turtle Beach users, but I could never justify buying some of their earlier offerings because of prices. Not that they were the most expensive, but more for my lack of PVP gaming, so I just used some get by headsets. Now Turtle Beach has launched the XO THREE headset for the XBOX One and RECON 150 for the PlayStation 4 a good functional gaming headset at a good price.

Note: Images can be clicked to view a larger size.

If I were to say what price category the XO THREE headset fell into for Turtle Beach I would say they were a mid price range offering, but that’s not saying that the features are midrange.

The XO THREE headset has the following specifications as listed on the Turtle Beach website:

  • Audio Connection: 3.5mm 90-Degree Angle Connector
  • Speaker Frequency Response: 20Hz – 20kHz
  • Speaker Size: 50mm Neodymium Magnets
  • Microphone: Removable Omni-Directional Microphone
  • Headband/Earpad material: Leather-Wrapped Headband / Black Fabric Ear Pads with Foam Cushioning
  • Ear Cushion: Over-Ear (Open)

The top of the XO THREE headset is padded and leather wrapped and has “TURTLE BEACH” stamped into it. The padding is above and below the headset frame. The green stitching is a nice touch.

On the bottom of the headset, you can see the leather band on the headband and the microphone and cord on the left side ear cup.

The outside of both of the ear cups for the XO THREE headset are basically the same with the Turtle Beach logo and the green material.

The inside of the XO THREE ear cups have nice padding for a comfortable fit. The inner speaker is covered by a mesh material. Speaking of ear cups now would be a good time to talk about the speakers. The XO THREE headset has a 50mm speaker and is designed for surround sound. The 50mm speaker is the same size Turtle Beach uses in its higher end offerings.

As I mentioned before, the bottom of the left ear cup has a cord (this plugs into your game controller or directly into a 3.5 mm headphone jack) and a removable boom microphone.

The removable microphone has a solid base with a flexible boom and a foam covered mic. The flexibility of the microphone allows you to place it exactly where you want it for the best sound being transmitted to your gaming friends.

The headphone cord has an inline volume controller for the headset volume and a mute slider to mute your microphone.

So, what is my bottom line here? I have been fortunate enough to review another gaming headset, the Polk Striker Pro Zx so I do have a reference to compare the Turtle Beach XO THREE headset too. First, let me say that the XO THREE headset, to me anyway is a good bang for the buck buy. The sound is great (may be as good or slightly better than my Striker Pro Zx) the build quality is good and the features are nice. From a comfort standpoint, I think my Pro Zx is a little bit more comfortable, I believe that is more to do with the ear cup shape than anything else. That being said, the only real negative I could find about the XO THREE headset is a lack of a removable cord. If you ask gamers what their biggest issue with gaming headsets is they will probably say the cord. Cords wear, crack, get eaten by pets/kids and when that happens it makes the headset unusable. It is a shame that Turtle Beach did not make the cord removable and changeable. The Turtle Beach XO THREE gaming headset can be purchased on the Turtle Beach website for $69.95. If you’re looking for a good gaming headset for a good price the XO THREE headset is worth a look.

Source: The sample for this review was provided by Turtle Beach. Visit their site for more information and Amazon to order.

 

Product Information

Price: $69.95
Manufacturer: Turtle Beach
Retailer: Amazon
Requirements:
  • XBOX One or compatible PC
Pros:
  • Decent price
  • Great sound
Cons:
  • No removable cord

Filed in categories: Reviews

Tagged: ,

Turtle Beach XO THREE gaming headset review originally appeared on The Gadgeteer on August 19, 2017 at 8:32 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Nima Portable Gluten Sensor review

I have celiac disease, an inherited autoimmune condition that affects about one in every 100 people. When I eat gluten – think pizza, pasta, bread, cake and cookies – my body revolts against the enemy intruder and starts attacking itself, resulting in a number of seemingly unrelated and ugly reactions from which I’ll spare you a description. But let’s just say some involve the gut.

People will sometimes offer me food they insist is safe for me (which, according to the FDA, is less than 20 parts per million), and sometimes I end up experiencing a variety of effects – some immediate, some less so, but all unpleasant and potentially contributing to premature mortality. This can happen at a get-together or at a restaurant.

So I was thrilled to be able to review the Nima Portable Gluten Sensor, a compact device that allows you to test for gluten. The unit, which retails for $279, comes with three test vials, a micro-USB recharging cable and a carrying pouch, which fits in a purse or pocket. I was given an extra 12 vials for review purposes.

The unit measures 3.5 inches wide and 3.1 inches high and has Bluetooth connectivity so it can sync to your smartphone. Users can contribute their test results to the Nima community using a free Nima app, which also provides a list of Nima-tested restaurants. That all was great when I paired my Nima with the phone I had initially, but the unit would not pair with my replacement phone a couple of weeks later, greatly limiting my ability to be part of the online Nima community where test results are shared.

To test for the presence of gluten, users put a tiny sample of food – liquid or solid – into a vial and insert the vial into the device. In three minutes – a theoretical estimation because my test times amounted to more like five minutes – a wheat icon and a “gluten detected” warning will warn users if their food is not safe to consume; a smile icon gives diners the go-ahead.

The unit and single-use vials use a combination of chemistry and sensors. Subscriptions are available for $59.95 per month for 12 capsules or $61.95 for 12 vials every other month. Those who eat restaurant or processed food often can opt for the $116.94, 24-capsule plan per month, trusting if they can afford to eat out all the time, they can afford the subscription cost. Some foods – soy sauce, pure vinegar, beer, or alcohol – cannot be tested, leaving diners to make educated judgment calls before consumption. The unit also is glitchy with frozen foods such as ice cream, but we’ll get to that in a bit.

For those who are pretty good at math, the ongoing cost comes out to roughly $5 a vial. That $5 vial allows you to test a sample about half the size of a pea. So forget the notion of trying to test a mixture of your entrée and sides. You’ll do well to fit a whole grain of rice in the vial, which means you could go through three vials to test an entire plate of food at a restaurant. Don’t even consider testing your way through a buffet line unless you have very deep pockets and a whole lot of time.

I also discovered the device is very sensitive and prone to capsule errors. My first test was a gluten-free roll at Cooper’s Hawk Winery, one of my favorite restaurants for its extensive and delicious gluten-free menu. I have never reacted to anything I’ve eaten there, but I decided to test the roll as an academic exercise. I only had one capsule with me, and I got a “capsule error” warning. I ate the roll anyway and didn’t get sick.

A couple of days later, I made my homemade cornbread using Quaker yellow cornmeal. (The only other ingredients are oil, salt, baking powder, baking soda, buttermilk and egg.) I successfully tested the finished product and got a smiley face icon. And I happily ate.

However, I received another capsule error when I tried to test my steak salad at Longhorn Steakhouse. This might have been a result of the difficulty in reducing my salad to a half-pea-sized test sample. Fortunately, I had better luck at Bonefish Grill, where my Chilean sea bass with mango salsa tested safe. My birthday dinner at PF Changs – the gluten-free Hokkien Street Noodles – also earned a smiley face from my Nima unit and my belly, as did my mushroom truffle pizza at Uncle Maddio’s Pizza during the continuation of my birthday celebration.

My husband had bought me a strawberry birthday cake made by Inspired by Happiness. Though that was marked gluten-free, I tested it anyway and was happy to learn it was safe. I also tested the Talenti double dark chocolate gelato he bought for me, only to receive a capsule error after waiting five minutes for results – longer than it actually took me to eat the gelato.

However, a few days later – or a few days too late, depending on your perspective – an email from Nima addressed the capsule errors that were occurring when testing ice cream. The company suggested a smaller sample size with a drop of water. I realized it would have to be a very small sample and a very small drop.

So I decided to test Talenti’s mango gelato (because the chocolate had inexplicably disappeared) using the updated testing parameters. I even waited a couple of minutes to begin the test while I photographed what the sample looked like. But this time I got no results whatsoever. Crickets. And when I pushed the start button a second time, I, of course, got a capsule error.

Here’s a case in which my Nima saved the day. One of my husband’s coworkers sent him home with a box of dark chocolate truffles from a Ukrainian company called LVIV Handmade Chocolates. I’m all about dark chocolate all day long (and this may incriminate me regarding the chocolate gelato), but I don’t speak or read Ukrainian and couldn’t decipher the ingredients list. I cut a sliver of truffle and put it into my Nima. Five minutes later, the smiley face icon told me my pig-out session was about to begin. Sometimes it’s the little things.

 

But let’s talk about a case in which my Nima truly saved the day. I met some ladies at a local BJ’s Restaurant & Brewhouse to celebrate a friend’s birthday. My friends had me choose the restaurant so I could be ensured a wide variety of selections. I ordered a gluten-free chicken-bacon-ranch pizza, which looked and tasted amazing. But I began to notice my mouth, which is prone to blisters when exposed to gluten, began feeling weird, so I pulled out my Nima and tested a piece of the cheese-covered crust. A few minutes later, I got a new icon: low gluten with a wheat stalk. In my hunger and impatience, I had already eaten one piece of the pizza. The rest went back to the kitchen and was replaced with salad.

The technology has tremendous applications and promise, but it’s still glitchy, and the cost is burdensome. It also can be difficult to get food into the capsule. Including tiny disposable tweezers or a sample-sized scoop would help, but that, no doubt, would only add to the cost.

As one who cooks from scratch and typically doesn’t eat out a ton, I will not become a monthly subscriber just yet, but I will pack my Nima with me when I travel, particularly in unfamiliar areas or overseas. I commend the company’s efforts, and I anxiously await improvements to the technology and reductions in the cost. Nima is a great beginning to addressing a serious health and quality-of-life issue for people like me for whom gluten-free isn’t a fad but a necessity. For the time being, it’s a valuable, somewhat fickle and costly ally for celiacs.

Source: The sample for this review was provided by Nima. Please visit their site for more info.

 

Product Information

Price: $199 US (was $279); 12 capsules $72.95 US (subscriptions available)
Manufacturer: Nima
Pros:
  • Works as advertised
  • Can save you from much unpleasantness
  • Simple to use
Cons:
  • Prone to errors
  • Unit expensive
  • One-time use capsules expensive

Filed in categories: Reviews

Tagged:

Nima Portable Gluten Sensor review originally appeared on The Gadgeteer on August 18, 2017 at 9:01 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

SANSI 30W LED Security Motion Sensor Outdoor Light review

We’re in the middle of remodeling the exterior of our house. It had wood painted wood siding and it’s currently (I can hear the contractors hammering right now…) getting vinyl siding. As luck would have it, a few weeks ago SANSI contacting me to ask if I might like to review their 30W LED Security Motion Sensor Outdoor Light (model C2440-FW). Since we’ve been actively replacing all the indoor incandescent lights with LED lights, I was happy to start the process outdoors as well. Let’s see how the update turned out.

What is it?

The SANSI 30W LED Security Motion Sensor Outdoor Light is a bright light that is designed to be installed outdoors and automatically turns on the light when motion is detected.

What’s in the box?

SANSI LED Security Light
Bar shaped mounting plate with 3 screws
Waterproof gasket
3 Wire connectors
Mounting bolt
Rubber screw plug

This outdoor security light looks similar to other motion activated security lights that I have on the outside of my house.

The SANSI has a swivel motion sensor in the center with two banks of lights on either side.

Where this security light differs from my others, is that the lights have LEDs instead of expensive halogen bulbs that can be a hassle to replace.

Each bank of lights has 4 LEDs arranged in a line. SANSI sells a different version of this light that has the lights in a 2×2 configuration instead of a 1×4 configuration like you see above.

The light has 3 wires coming out of the base, and there are two switches and a light sensor on the bottom of the motion sensor.

The switches can be configured to set how long the lights will stay on (1, 5, or 10 minutes) and the motion detection range.

Most people will want to use this as a motion activated light, but you can set it to manual mode which only works at night and can cause the light to be on for up to 6 hours at a time. When I asked for more details about this mode, here’s what the SANSI rep told me:

Manual Mode (Working Mode) Which is similar to dusk to dawn mode, because the default mode of this product is the Motion Sensor Mode. If you need the Manual Mode, you may have to set it up to Manual Mode every time you need.
Set-up: Flip the light switch off for one second then back on to toggle between AUTO and MANUAL mode.
Function: Under Manual Mode, the light could be on at night for 6 hours.

*Note: Manual mode only works at night and with the ON-TIME switch in the 1, 5, or 10 minutes position.

Installation

I was going to install the SANSI light myself so I could write about any issues that came up while doing so. But the contractors saw the box and did the install before I even realized it. The included instructions are pretty straight forward and with only 3 wires it is probably hard to screw up the install, so let’s just say it was really easy especially if you’re replacing an existing light. Just know that the SANSI light has to be connected to a 120V power source.

This is what the SANSI 30W LED Security Motion Sensor Outdoor Light looks like when it’s installed.

You can adjust the angle of the motion detector as well as the lights.

Although the image above doesn’t really give a good indication of how bright the SANSI security light is, let me tell you, it’s a very bright flood light! It’s much brighter than the light I previously had in the same spot. The LEDs are equivalent to 250W incandescent light. I have noticed that the SANSI LEDs have a colder look instead of the warmer yellow light of my other security lights. The specs say that the SANSI LEDs are 5000K Daylight. All I know is that they are bright.

They’ve been installed for about a week and are working as expected. I have them set to come on when motion is detected and stay on for 1 minute. The motion sensor is triggered when I walk under the light and when I pull out of the garage every morning when it’s still dark outside. The sensor has a range of 180 degrees and max 50 feet. I have it set for my short driveway and it’s been working great.

Final thoughts

If you want to update your outdoor lighting to LED lights that are as bright (or brighter) than incandescents, but use less electricity, SANSI’s 30W LED Security Motion Sensor Outdoor Light is a good choice.

Source: The sample for this review was provided by SANSI. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $59.99
Manufacturer: SANSI
Retailer: Amazon
Pros:
  • Very bright
  • Easy 3 wire install
  • LED bulbs should last for many years
  • Motion settings for time and range
Cons:
  • None

Filed in categories: Reviews

Tagged: ,

SANSI 30W LED Security Motion Sensor Outdoor Light review originally appeared on The Gadgeteer on August 17, 2017 at 12:15 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

ThinkSound ts03+mic headphone review

You Gadgeteers all remember wired earbuds, right? What am I saying – everyone gets a pair of these with their phone, even if it’s an iPhone 7 with no headphone jack! The quality of those bundled earbuds, however, can vary widely. ThinkSound has been doing a lot of work on improving the sound of headphones and earbuds by incorporating wood enclosures into them, like fine speaker cabinets of old. Their latest creation is the ts03 + mic, which brings light weight and crisp bass together for your music and phone talking. Guess who got a pair to test. Yep. This guy!

Note: Photos may be tapped or clicked for a larger image.

Here are the specifications from their website:
• Microphone + call/music control for mobile communication
• Compatible with iOS and Android devices
• Wooden housing for crisp, accurate music reproduction
• 20 Hz – 20 kHz frequency response
• 99 ±3 dB @ 1KHz 1mW sensitivity
• 16 ohm impedance
• 45˚ angled gold plated plug for increased clarity & durability
• Acoustically enhanced 8mm driver
• 10g Ultra-lightweight design
• Kevlar-reinforced, tangle-resistant 4 foot long cable
• Passive Noise Isolation minimizes ambient sounds
• Sweat-resistant design, perfect for the gym
• Four flexible silicon ear inserts for a secure fit (s/m/l/xl)
• Cord clip, cotton carrying pouch & hard case
• One (1) year limited warranty

The earbuds arrived in ThinkSound’s new “package-free” packaging: It’s all packed into a tin box with clear labels that can be used to protect the ts03s in your bag or pocket. If you don’t need that much protection, there’s also a light cotton drawstring bag. I really like it, but I’m curious to see how this packaging design fits into brick and mortar stores. It’s one thing for a $1 box of mints, but for a $200 set of earbuds, that’s another story.

The angled plug is a nice touch, sticking out at 45° from the line of the jack. This gives a bit of strain relief. There are three feet of cord from the plug to the branded metal divider, and 15” of cord for each earbud from the divider. With lead-in cords this long, it’s easy to route them behind your head, in case they would be in the way during exercise. There was a little ambient noise from touching or rubbing on the cable while wearing them, but not enough to be distracting. If you’re doing highly active exercises, it may get in the way, but for biking, walking, or running, it shouldn’t be an issue, once you turn on a little music. I found I could listen at about half volume on my iPhone 6s Plus for most music. Depending on mike placement and the audio engineering, many podcasts were listenable at this level as well.

The fit of the ts03’s is adjustable with 4 sizes of tips. The collar of silicon stands out from the central core, to isolate the speaker into the center of your ear canal. I was pleased with the sound space this provides. I listened through the ts03’s for several hours via Spotify, including tunes from The Rescues, Joshua Radin, Van Morrison, Train, and Jeff Buckley. The acoustic pieces were like you were sitting in the front row of a live set. I tend to listen for little things, like turning on guitar pickups, turning pages of music, and the like. The scrape of a pick against the wrapping of a string, or an overdubbed vocal line. These buds let you dig into the picky little bits like that if you want to. Or you can just enjoy the feeling of being there. I never had the feeling that the earbuds were going to fall out. Once I started listening, everything else outside of the sound fell away.

I have really gotten used to wireless earbuds, but every now and again, usually when I’m reviewing a pair of wired earbuds, I’ll remember how quick and easy it is to plug in a cable and immediately have the sound in my ear. There’s no worry about video lag-time, where you hear the sound a split-second before you see what caused it. There are no batteries that may fail halfway through a listening session. (This is my current pet peeve for wireless earbuds!) The mic is right there on the cord by my jaw, rather than up on an earpiece, so if I want to have a quick aside with someone, or sneeze before I can get to the mute or whatever, I can grab the mic and block out my caller. Plus, wired headphones are never paired to another device that you have to go hunt down in another room or in your backpack, unpair, and re-pair to your current device. They just jack in and are playing, and that can be a good thing.

At $199.99, these are not throw-away units, by a long shot. They give you a truly deep experience of listening. If you want to hear the quality of what you’re listening to, the ts03s are going to deliver it. Yes, they are still earbuds, but they give an incredible amount of sound to you through that form.

Source: The sample for this review was provided by ThinkSound. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $199.99 on think sound website, $119.99 on Amazon
Manufacturer: ThinkSound
Retailer: Amazon
Requirements:
  • AUX/phone sound source
Pros:
  • Quality cables (wiring) and connectors
  • Great sound and isolation
  • Warm, low tech outer look belies high tech insides
  • Waste-free packaging
Cons:
  • none, really

Filed in categories: Reviews

Tagged:

ThinkSound ts03+mic headphone review originally appeared on The Gadgeteer on August 17, 2017 at 9:11 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.