Maximus Camera Floodlight review

Home security seems to be one of the hot topics at this years CES, with the expansion of the connected home it seems like new home security products are popping up every day. While interior security seems to be getting the most attention improvements and innovations in outdoor security have brought about new products and competitors. One such “new” innovation is the outdoor floodlight. I know the floodlight is not new, but the addition of a camera and speaker system is. These systems have the ability to record incidents as well as allow you to view them in real time. 

Note: Images can be clicked to view a larger size.

What is it?

The Maximus Camera Floodlight is just what the name implies, a Floodlight with a camera built into it. But there is more to it than that, it is a security tool. Besides, the floodlight and camera the light has a built in microphone and speaker. Along with the Kuna software package the Maximus Camera Floodlight is a smart security device.

Hardware specs

Per the Maximus web page:

Camera & Sound

  • Resolution: HD full-color 1080p
  • Field of view: 155º diagonal
  • Viewing angle: Adjustable camera (up to 40º left-right, up-down)
  • Two-way talk: Communication through your smart device
  • Siren: 100 dB

WiFi & Detection

  • Wi-Fi frequency: 2.4/5 GHz
  • WiFi network 802.11b/g WEP, WPA and WPA2 supported (WPA2 recommended)
  • WiFi speed: best performance with 2 Mbps upload/download where installed
  • Sensor: passive infrared + motion detection algorithm 
  • Detection range: optimized to detect objects within 70’ (7’ mounting height)
  • Mobile device: iOS devices running iOS7 and above, Android devices supporting Bluetooth LE:4.4 (Kit Kat) an above
  • Internet: internet connection required for both mobile device and location where camera floodlight is installed

Hardware

  • Material: plastic
  • Power type: hardwired continuous power (no batteries)
  • Weatherproof: tested in -4ºF (-20ºC) and 122ºF (50ºC). Humidity < 95%
  • Light settings: dimmable; motion activated + dusk-to-dawn + turn on/off from your phone
  • Lightbulb: 2400 lumens brightness; 5000K color temperature 
  • Dimension/weight: 10.78 (W) x 8.02 (H)
  • Input voltage: rated 100-240V, 50/60 Hz max 90-277V, 50/60Hz

What’s in the box?

In the box you get the Maximus Camera Floodlight, instruction booklet, a welcome card and mounting hardware. 

There are four main components to this floodlight system (not including the WiFi element), the lights, the sensor, the camera and the two way speaker. 

The lights for the floodlight are bright. They are so bright in fact that I dimmed them a little so I would not make the neighbors mad. Being adjustable allows me to set a wide area of illumination so I can see more with the camera. 

The sensor looks like most sensors on outdoor floodlights with the exception of the LED on the bottom of it. This LED is what lets you know when you are connected to WiFi. 

The camera on the Maximus Camera Floodlight is adjustable, it looks kind of like a ball joint with a hole in it. Daylight and nighttime (when the lights are on) pictures are good quality.

The speaker unit is mounted on the base of the floodlight unit, you can see the holes. Besides, being able you yell sayings like “hey you kids get off my lawn” the system comes with preprogrammed sayings that you can activate using the Kuna software on your smart device (I like the dog barking).

Instllation

The Maximus camera Floodlight comes with mounting hardware, and installation is rather simple if you already have wiring and a junction box at the location where you are mounting the camera.  The system is designed to use the junction box as a mounting point. In order for you to be able to take advantage of all of the features of the Maximus Camera Floodlight you will have to be connected to the internet. 

Software

Although not technically in the package there is a software component to this system its called Kuna. The Kuna app is used to set up and control the features of our Maximus Camera Floodlight.  Kuna also has a built in AI that can learn and can distinguish between a car and a person.

One nice feature of the Kuna software is the thumbnail view of recent events. This displays the recordings of events that have happened in the recent past (I believe within the last two hours). That being said, I must say I found the Kuna app hard to navigate at times. Getting to the settings page is not really evident and can be frustrating when trying to adjust the floodlight system. Another issue I observed is that the app does not work well on my iPad Pro. Even though the user interface was not to my liking setting up and connecting to my Maximus Camera Floodlight was easy and straightforward. The app automatically found my device and walked me through the setup.

Design and features

As you may have surmised by now the Maximus Camera Floodlight is designed to compete against other similar products on the market today, mainly Ring. With similar features floodlight, camera, two way speaker both systems work on the same principle. The folks at Maximus (the makers of the system I am reviewing) sent me a design and feature comparison so I could see the difference between them and who they perceive as their main competition. Both Ring and Maximus have a free service and paid service for their apps so I will highlight things what I think are important focusing mainly on the hardware features.

Mounting options: Both products can be mounted on a vertical wall, but the Maximus Camera Floodlight can be mounted on your eves as well. The Maximus Camera Floodlight also has a “Quick Connect” mounting base that made installation easier.

Lighting: Both systems have two lights, the Ring has LED spotlights and the Maximus has LED panels. In the comparison photos I would say the Maximus illuminates a wider area.

Camera: Both cameras seem to be close enough in similarities to call that a wash, but the Maximus camera does allow for some independent adjustment where the Ring’s is fixed.

Software/apps: Both companies offer a paid service and a free service and they have some of the same features, but what stands out to me on the Kuna app for Maximus is the free cloud storage of your recordings. The recordings will stay in the cloud for two hours so you can view and download them. Ring does not offer this in their free service.

What I like

  • Designed for easy installation.
  • Bright and adjustable lighting.
  • Easy setup.
  • Free service basic functionality works well.

What needs to be improved

  • Kuna software

Final thoughts

What’s my bottom line on the Maximus Camera Floodlight? I like it a lot. This system is almost plug and play (minus the hardwiring you do) out of the box. Once you wire it up and connect to the internet you are good to go. The Maximus Camera Floodlight works well with the basic free service, but the pay service has an AI that will learn and help make your system smarter. During my writing of this review this system gained the ability to integrate with Google Assistant which is a nice plus. With a cost of $249 on the Kuna website, the Maximus Camera Floodlight is on par with other similar systems of this type and quality.

Price: $249.00
Where to buy: Kuna
Source: The sample for this review was provided by Maximus

The post Maximus Camera Floodlight review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged:

Maximus Camera Floodlight review originally appeared on The Gadgeteer on April 8, 2018 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

iClever BoostCube Fast Wireless Charger review

The iClever BoostCube Wireless Charger can charge a Qi enabled device simply by placing the device on top of it. The adapter supports 5W and 10W charging modes and the power supply is from a USB cable. Read on to see what I think!

What is it?

The iClever BoostCube Wireless Charging station is an adapter that charges Qi enabled devices using USB power. Qi devices are capable of being charged at a distance and the main benefit of this capability is the convenience of charging devices without connecting power cables. The technology relies on inductive coupling between two coils and it works because at least one coil is in the charging base, another is in the target device and there isn’t a large amount of metal between the coils. The speed at which the charging takes place depends upon the power available to the adapter, circuitry in the adapter, circuitry in the receiving device, and the condition of the battery in the receiving device.

What’s in the box?

iClever Wireless Charger
USB Charging Cable
User Manual
Warranty Card

Design and features

Specifications

Input: 9V/1.67A or 5V/2A
Output: 9V/1A or 5V/1A
Power: 10W/5W
Charging distance: 2~8mm
Product Dimensions 2.9 x 0.5 x 2.9 inches
Item Weight 3.68 ounces

Unboxing

The iClever charger comes in a fairly standard printed cardboard box. The side of the box lists the main features of the device, which includes over-voltage protection, over-temperature protection, short circuit protection and foreign object protection.

Plastic molded packaging protects the charging pad and the USB cable inside the box. The user manual and the warranty card come packaged below the plastic form. The instructions and the warranty card are in the English language only.

Design of the Wireless Charger

The top of the iClever charging pad has a leather coating. The leather has a black pigment and is embossed in the center with the iClever logo and name. The leather is a great feature because it makes each wireless charger unique, it provides a professional look and feels to the charger, it’s durable and easy to clean. Also, the natural grain of the leather provides a surface with the ideal texture to keep the device on top of it from moving. Other synthetic materials tend to be too slick or sticky.  The wireless charger is completely round and therefore can be set up with the cord leaving from any direction and not look askew on the surface it is resting on.

The material on the sides and base of the unit is black anodized aluminum. The material is perfect for good heat transfer and durability. The front of the base (the area in front of the iClever logo) has a LED indicator about 3/4″ wide. Four screws are hidden under silicone rubber feet to secure the top to the base. The bottom of the base indicates the model name and number, power information, compliance information and country of origin info.

Operation

The user must supply their own power supply for the included USB cable. It seems likely that most people have many more power supplies than they actually use, therefore this isn’t really an area that needs improvement. However, while the outside box does indicate many of the items features and benefits, it does not state that the unit comes without a power supply. Once the unit is plugged into the power supply the front LED illuminates for 3 seconds, indicating that device is ready to use.

Placing the phone on the wireless charger immediately starts the charging process. Once the battery reaches 100% on the phone the charging LED remains on and trickle charges the iPhone. Once the iPhone battery is full the LED turns off indicating that the wireless charging pad is no longer functioning.

The LED blinks on and off indicating that a foreign object is present between the wireless charger and phone. This function works when a quarter is between the charger and phone.

Performance

I plugged the USB into a 10W USB power adapter and monitored the charging operation with a USB safety tester that displays the voltage and amps and calculates the watts and accumulated amp hours. Even when a 10W power adapter supplies the power, the draw from the USB tester never exceeds 5.1W while charging an iPhone. This is in agreement with the operating instructions because the manufacturer indicates that QC compliant fast charging is not compatible with iPhone. In conclusion, the iPhone battery was charged from 10% to 43% in 70 minutes.

When the iPhone is not in a case, it will still charge with 5.56 mm of Post-it notes between the phone and the wireless charger.

What I like

  • Leather top
  • flexible power supply options

What needs to be improved

  • Box should indicate that the contents does not include a power supply.

Final thoughts

The iClever Wireless Charger is a good looking effective wireless charger.

Price: $21.99
Where to buyAmazon
Source: The sample for this review was provided by iClever.

The post iClever BoostCube Fast Wireless Charger review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged: ,

iClever BoostCube Fast Wireless Charger review originally appeared on The Gadgeteer on April 7, 2018 at 12:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Thinium ReCharge+ 2.0 backup battery review

What is it?

The Thinium ReCharge+ 2.0 is a slim Smartphone/Tablet charger that can be used to provide power and charge via several different types of connections, using its interchangeable adapters and built-in USB port. It can be re-charged directly via a wall outlet without the need for a cable or a wall wart.

What is in the box?


Package contents:
• 1 x Thinium ReCharge+ 2.0 Power pack
• 2 x Magnetic plates
• 1 x Kickstand
• 2 x Suction cups
• 1 x USB-C adapter
• 1 x Micro USB adapter
• 1 x Lightning adapter
• 1 x Booster

Design and features

The Thinium ReCharge 2.0+ is a smooth to the touch, all black, lightweight, versatile charger that can be used to charge or power devices via its USB port or directly charge and power any phone that uses either a USB-C, USB micro or Lightning port. It can also charge 2 devices simultaneously. It has a popup section that uses the various adapters and allows you to connect your phone directly to it. It also has a pop out AC plug that allows a phone that is connected to it to be charged while the Thinium is also being charged from a wall outlet.

There are suctions cups that are provided that can be mounted to the surface of the Thinium to secure the phone, and there are 2 magnetic plates with a strong adhesive backing that can be attached to the phone or the phone case, and magnetically clamped to the Thinium.

On the opposite side of the Thinium, there is a kickstand that can be used to support the phone horizontally, so that full screen viewing can be enjoyed while it is being charged. The Thinium can also be used in a similar manner to charge a tablet.

What I like

The Thinium is lightweight and the fit and finish are great. It offers multiple ways to charge devices, and multiple adapters to accommodate different types of ports. I like that the AC plug is built-in so that there is no need for a cable and a bulky wall wart.

What can be improved

While the Thinium offers versatility in several ways, when it was attached to my phone I found it to be very bulky and inconvenient to carry around as a daily charging device. Today’s technology offers QI wireless portable chargers that are thin and light, and also include the ability to charge multiple devices simultaneously. In addition, since wireless charging works with many cases that have built-in kickstands, that feature is readily available but in a more convenient package. When I attached the magnetic plate to the back of my case, it did not work for me because my phone case has a built-in kickstand that made the distance between the case and the Thinium too far. I decided to take it off and adhere it directly to the back of the phone to try it without my case. However, the adhesive was so strong that I needed to use a screwdriver to remove it. In my opinion, that would have damaged my phone if attached directly to it and if I later needed to remove it. Prior to removing the magnetic plate from my case, I placed my phone in its case on the QI wireless charger that I regularly use. About an hour later, I picked up my phone and I almost dropped it because the magnetic plate had become incredibly hot. To me, this means that if I decided to use the Thinium charger and the magnetic plate to keep it in place, I would only be able to use the Thinium to charge my phone from then on, because using any other wireless charger would result in this heating or overheating problem.

The other factor that needs improvement is the capacity of the battery and the time it takes to provide a charge. I plugged in my iPhone 8Plus at 58% of charge and it took 2 hours and 40 minutes to charge it to 100%. I then plugged in my iPad Pro 12.9″ which was at 64% to charge, and by the time it reached 71%, the Thinium’s battery was completely depleted. The next day I charged the Thinium to full charge and again I plugged it into my iPad Pro 12.9” via the lightning connector. It charged my iPad from 66% to 86% in 2 hours and 30 minutes, and the battery was once again completely drained. While I understand that it is primarily made to be used with phones, it does state that it has the ability to charge other devices via its USB port, and that it can charge multiple devices simultaneously. Based on the initial results of its charging capability, it seemed pointless to test it using my power hungry laptop. Manufacturers today offer slim, lightweight, high-powered wireless chargers with way more capacity. This lack of capacity just compounds the negatives of this device.

Final thoughts

While the Thinium offers some versatility and features in an innovative way, it lacks the portability, and the 3000mAH capacity is simply not enough for what people today demand and need from their devices. The added bulk negates the advantage that most of the other convenient features are intended to provide. While this device may work for some, it is likely to be passed over by most.

Price: $69.99
Where to buy: Thinium Website
Source: The sample for this review was provided by Thinium.

The post Thinium ReCharge+ 2.0 backup battery review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged:

Thinium ReCharge+ 2.0 backup battery review originally appeared on The Gadgeteer on April 7, 2018 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Mission Workshop Rhake Backpack review

If you spend time on a bike, you probably know about Mission Workshop and their amazing bags. Today we’re looking at their latest pack: The Rhake. Designed with tons of dedicated organization for your tech and gear, the Rhake is a true multitasker for cyclists, commuters, and travelers alike. It’s a good one, folks. To the review!

What is it?

It’s a burly weatherproof laptop backpack with all kinds of organization and enhancements for your tech gear and travel needs.

Hardware specs

  • External dimensions: 21” x 13” x 5”
  • Internal volume: 1,350 cu. in. (22 L)
  • Weight (empty): 3.1 lbs.
  • Body Fabric: Available in HT500 or MultiCam® Black Camo Cordura®.
  • Two-layer weatherproof construction and water-resistant zippers.
  • Arkiv® rails on the shoulder straps for easy addition of Mission Workshop Arkiv® accessories.
  • Perforated foam back panel.
  • Made in the USA from domestic and imported components.

Design and features

The Mission Workshop Rhake wears it’s heritage as a bike ready bag proudly. It’s a rugged looking bag, but a lean profile and sophisticated styling details give it a contemporary look. There’s no doubt that this is a bag made to work hard, but it will look good doing it.

The Rhake is built around Mission Workshop’s signature rolltop-style design for access to the main storage compartment. As opposed to a simple flap, the rolltop “hood” is an 8” extension of the bag that is secured by either a velcro flap or an adjustable strap that hooks into a loop on the bag. This setup gives you a flexible, cavernous space (22 liters) when rolled tight for a completely waterproof seal. Use the adjustable strap and that space expands to up to 28 liters for taller/larger loads. There’s also a deep zippered pocket on the rear panel of this chamber to keep documents flat and dry.

Your laptop rides behind the main compartment, closest to your back, in a padded laptop compartment that runs the height and width of the bag. Accessed by a full-height zipper on the rear seam, this compartment will easily accommodate a 15” laptop and some 17” laptops. You can also fit a laptop and a larger tablet here, depending on the size of your gear.

A collection of compartments on the front face of the bag are used to sort out your small stuff. Two 7” by 12” zippered organization panels unzip to reveal a set of zippered mesh compartments (and a key leash!) on the left panel, and an open pocket for quick grab stuff on the right panel. A pair of adjustable buckled straps in front of these panels can also be used to secure additional items like a tripod or a rolled-up jacket. A vertical tablet/notebook pocket sits behind the organization panels and is accessed by a horizontal zipper with its own rain flap. Below the organizational panel is a horizontal compartment intended for chargers, headphones, or other similar small chunky items. 

 

Rounding out the organization is a brilliant 10” by 6” “hidden” pocket on the opposite rear seam from the laptop zip. This pocket contains an elastic mesh pouch you pull out to sling your water bottle, including oversized bottles. Tuck the pouch away and you can use this pocket for valuables like a wallet or cell phone since it sits close to your back. Very clever.

The harness configurations is completely adjustable. The shoulder straps are wide, well-padded, and curve slightly at the hips for a contoured fit. Adjustment points at the top and bottom of the shoulder straps and an adjustable sternum strap enable you to dial in the perfect fit for your body type. Generous back pads provide additional comfort, with a lower lumbar panel designed as a pass-through for your luggage handle. A wrapped foam top handle completes the rig for three different carry options.

The shoulder straps also feature Mission Workshop’s proprietary Arkiv rail system, designed to work with MW’s modular accessories. Open the locking tabs and you can slide accessories (like a cell phone holder) onto the straps for additional organization. You can read more about the Arkiv system here

The build on the Rhake is extraordinary. The primary material is MW’s exclusive HT500 high-tenacity fabric, a sophisticated upgrade over Cordura (read more about it here). Dual layer construction is used throughout, providing an additional layer of smooth waterproof material for extra element protection. Duraflex buckles are standard (some options offer Cobra buckles!) along with water-resistant zips throughout. Every seam and corner is overbuilt for durability, and little enhancements like zipper garages and a blinky light loop on the bottom of the bag show the attention to detail. It’s all made in the USA, and backed by a lifetime warranty.

Performance

If you’re a commuter or traveler that carries your life on your back everywhere you go, the Rhake is your new best friend. It’s a great design that makes life easier on the road.

For extended carry, the Rhake may be the most comfortable pack I’ve carried. The harness setup is much chunkier than most business-style packs, but you’ll appreciate all of that padding and the ability to adjust the rigging when you’re running through an airport or train station (or hitting your two-wheeled commuter).

If you’re a smaller framed person, you should be aware that the Rhake is quite wide and tall (21″ by 13″). But at a mere 5″ deep, it’s lean profile hugs tight to your back for active maneuvering. I’m 5’10” and 190 pounds, and tend to favor slightly shorter packs based on my body type. I don’t have any comfort issues with this pack, because I can adjust all of the strapping to get to a comfortable fit. I’m thinking that this bag won’t fit under an airline seat, but I plan to test that on an upcoming trip.

When you are living out of your bag for extended periods of time, the multi-zone organization of the Rhake is brilliant. Since every storage area is accessed independently, you can organize your gear based on size and frequency of use. The main compartment is waterproofed inside and out, which is ideal for the safe transport of gym stuff or groceries (or a six pack, shown below) without risking that your electronics could get hit with an accidental leak. At 22 liter plus capacity, you could easily get a couple of days worth of clothes in there as well.

Mission Workshop has clearly put some time into thinking about user needs, and how you might sort out the rest of your kit. Laptop, tablet, and notebooks have dedicated spaces. That left organization panel, with its different sized mesh sub-pockets, is perfect for sorting out all of those little business or travel bits. The quick grab right pocket is flexible enough to handle everything from travel documents to sunglasses, while chargers and power bricks have their own garage so they don’t ensnare everything else. Hydration is optional. It all adds up to a well sorted, flexible system that doesn’t require any additional organization add-ons to work. I will probably add the Arkiv cell phone holder to the rig so I have a dedicated phone holster, but that’s about it.

I have zero concerns about durability with the Rhake. I’m very picky about quality in my bags, and the Rhake is among the best that I’ve tested. Every aspect of the bag is overbuilt to take a lifetime of beatings. If you’re looking for a travel bag that will log a lot of miles, you’ll be happy with this little monster.

My final comments are related to style. It should be noted that the Rhake is not a streamlined fancy business bag. It’s a technical pack that has lots of straps, and there’s a chunky rugged look to the whole package. I don’t know that I would wear it with a suit. But I think that the contemporary style looks great in business casual environments.

What I like

  • Outstanding build and material quality
  • Built to handle the elements, on or off a bike
  • Brilliant  multi-zone organization for your big stuff, small stuff, and technology
  • Extremely comfortable, adjustable fit for all-day carry
  • Dedicated key leash
  • Brilliant water bottle pocket that tucks away when not in use

What needs to be improved

  • Wide, tall form may not work for smaller-framed people
  • Lots of straps
  • May not fit under an airplane seat (something I will be testing shortly)

Final thoughts

While I have handled MW products in the past, Mission Workshop Rhake is the first of their products that I have had the opportunity to put through an extended test. It’s fantastic. The flexible organization for your tech and gear is really well thought out. Carry comfort is excellent. You’re going a pay a premium for the Rhake, but I think the quality and craftsmanship is in alignment with the pricing here. It’s an investment piece that will last a lifetime.

Price: $365 – $455 depending on options
Where to buy: Mission Workshop and some bags are available on Amazon.
Source: The sample of this product was provided by company Mission Workshop.

The post Mission Workshop Rhake Backpack review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged:

Mission Workshop Rhake Backpack review originally appeared on The Gadgeteer on April 6, 2018 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Spider SpiderPro Single Camera System V2 camera holster review

What is it?

The SpiderPro Single Camera System V2 is an ergonomically designed belt with integrated camera holster that allows photographers to carry their DSLR camera with any length of lens attached, comfortably and safely.

What’s in the box


In the package, the system I received included the SpiderPro belt with integrated Holster and the Pro2 Plate.

Design and features

The SpiderPro Belt is made of a very comfortable material that makes it easy to wear it for long periods of time. The length of the belt is adjustable via the included Velcro that is attached to one part of the inside of the belt. It is a 2-inch-wide belt with a 3-inch padded area around the back that provides extra comfort around the waist. The built-in holster with the locking mechanism is attached to an 8” x 6.5” padded area for your camera to rest on. It is attached via two hex screws from the inside of the padded area.

Built in to the holster there is a spring-loaded mechanism that locks the Pro2 Plate in and prevents it from coming loose accidentally. This spring-loaded locking mechanism must be engaged by pulling it up for the camera to be removed from the holster.

The belt buckle is a strong ABS type plastic clip that has a great and secure locking system to ensure that it never comes loose on its own. The belt buckle is approximately 2.5” wide.

It is important to note that another padded attachment with a holster can be added to the opposite side of the belt to upgrade it to a dual camera system.

The Pro2 Plate attaches to your DSLR and locks into the holster. On one side it has a 1/4 – 20” screw to attach it to your DSLR, and anti-slip rubber grips on either side of the screw to keep the plate in place.

On the other side of the Pro2 Plate, there are two 1/4 – 20” screw holes to allow the DSLR to be mounted to a tripod or other equipment without having to remove the plate. The rounded bolt that locks into the holster can be mounted on the left or right of the plate. There is also a hex driver neatly tucked away on the side of the Pro2 Plate that can be used to attach the plate to the camera.

What I like

I simply love the SpiderPro belt and Holster. The comfort that allows me to wear it for long times, and the reliable security the locking mechanism provides, gives me a sense of safety and security with my rig when I move around during a photo shoot.
I own several photography gear belts and many of their manufacturers claim to be the best at comfort and security, but so far, none of them come close to the SpiderPro. The fact that it handles both short and long lenses with ease is a major plus.


What needs to be improved

The only improvement I would recommend for this belt and holster system is possibly for the redesign of the Velcro system that is built in to adjust the length of the belt. While it is very secure, I found it somewhat tedious to work with when I was adjusting the length of the belt, because it kept sticking together and I constantly had to pry it open again. It is important to note that this is not a flaw but rather just something I would like to see redesigned so that it is easier to work with.

Final Thoughts

I have searched for a long time to find a belt that works for me without it feeling uncomfortable and odd, especially on days when I must wear it for a long time. While the Spider Pro is not perfect, it is certainly one of the best I have tried and especially so at its price point. While anyone using the Spider Pro with a DSLR and a long lens still needs to be careful not to hit the lens against any external object, they will be hard-pressed to find fault with its design or the value that it offers.

Price: $150.00
Where to buy:Spider and Amazon
Source: The sample for this review was provided by Spider Holster.

The post Spider SpiderPro Single Camera System V2 camera holster review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged: , ,

Spider SpiderPro Single Camera System V2 camera holster review originally appeared on The Gadgeteer on April 5, 2018 at 12:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.