Home Reviews

Brooks England Pitfield Backpack review

REVIEW – What’s defines heritage? How about a company that’s been making cycling and equestrian gear since 1886! Today I’m reviewing the Pitfield Backpack from Brooks England, and it’s a beauty. Let’s take a ride!

What is it?

It’s an all-weather backpack designed for biking that has the capacity for all of your daily essentials… including your bike helmet.

Hardware specs

  • 12.6” wide by 21.6” tall by 6.7” deep
  • 2.9 pounds
  • 24-28 liter capacity
  • Waterproof PU Coated Nylon 66 & Cordura
  • YKK Aquaguard Zips
  • Padded Compartments
  • High Grade Aluminim Hardware
  • 100% Recycled Lining

Design and features

The Brooks Pitfield Backpack is a sneaky operator. It’s a working bag designed with the cyclist in mind, but the clean & understated profile looks good enough to rock in the office. At a 24-28 liter capacity, it’s a bigger bag but feels smaller due to its streamlined profile and some very clever pocketing design. It’s kind of like a stealth bomber.

The Brooks Pitfield Backpack is built to handle the elements. Water resistance comes from a combination of waterproof PU coated nylon, Cordura, and YKK Aquaguard zips. An interesting combination of textures combined with Aluminum hardware add subtle style. It will take a downpour, and look good doing it.

The interior lining boasts a cheeky pattern that pays homage to Brooks England’s heritage. I love little details like this!

Your laptop rides in its own padded 18” by 12” compartment that sits on your back, and has a separate side zip for access. A 15” laptop fits easily in there along with a tablet.

The main compartment is positioned in the center of the bag, accessed from a flap-over lid that is closed with two sturdy aluminum hooks that connect to loops on the flap. Adjustable straps allow you to cinch-down or expand the compartment based on what you’re carrying. There’s also an 8” deep divider at the bottom of the compartment to help organize your stuff.

Those locking straps are actually set at 45-degree angles to the front face of the bag, to accommodate the Pitfield’s most unique feature: an 11” by 15” front panel compartment that stretches to accommodate larger items like a bike helmet!

A vertical zip opens this compartment, which also includes two small stash pockets (3-1/2” by 6” and 4-1/2” by 8-1/2” respectively) with zips built along the centerline for easy access when the main pocket is opened. A 7” deep open pocket at the bottom of the space wrangles loose items, while a hanging loop at the top of the compartment gives you a place to dangle your keys on a strap or carabiner.

There’s an additional pocket on either side of the bag, accessed by vertical zippers. The left pocket is 9” by 6”, perfect for your smartphone or wallet. The right pocket features a pop-out elastic water bottle net that fits oversized bottles. I’m seeing this on a lot of packs these days, and it’s a great feature that tucks away neatly when not needed.

Finally, there’s also a 10” by 4” horizontal pocket accessed from a zip under the top carry handle, made from a stretchy mesh material.

The carry system features moderately-padded straps that are curved for comfort & fit. Custom aluminum buckles on the adjustment straps use a double-loop strap insertion method and curved profiles to prevent unwanted slippage, and a built-in sternum strap adds some stability to your ride. The back panel padding is marvelous, with deep perforations to promote air circulation. It won’t slip and slide around on you, either.

The build is full of little quality details. External zips are hooded to prevent leakage in the bag. Every strap has a sliding collar to lock down extra flappy bits when adjusted. The zips don’t quite run the length of the pockets, creating a nesting space in each pocket so things don’t tumble out when they are opened. Every seam is reinforced. It’s a nicely detailed build, backed by a 10 year warranty that shows Brooks England’s commitment to quality.

Performance

I am not a cyclist, but I tend to favor bike-oriented packs for daily use for comfort, weather resistance, and overall usability. The Brooks Pitfield’s design is so well executed that it works just as well on or off the bike. It’s ridiculously easy to live with.

The Pitfield is on the bigger side of a daypack, but it doesn’t feel like it. The tall, wide format of the bag may be an issue if you have a smaller frame, but check out how nicely the profile compresses!

I love the streamlined harness system. While it looks fairly light, it’s actually super-comfortable to wear all day, even when you’ve maxed out capacity on the bag. It also an office-friendly: slipping the bag on and off is easy, and you’re look is not dominated by massive shoulder straps if you’re dressed up. The whole system hugs the body well and provides excellent balance. Despite the larger size, I don’t feel that a waist stabilizer is required here.

Pocket design is a delight. You have just enough of a variety of places to organize your less-used stuff (like chargers), with secure locations for important stuff (like your wallet) and dump n’ grab places for things you need on the run (like sunglasses). I really like the overall accessibility of the external pockets. The beefy zipper tabs make for easy manipulation, and all the pockets are wide enough to get in and out of without straining your fingers. And you won’t find a single piece of Velcro anywhere to fight with. I kinda love that.

With all of the external compartments for your tech and travel bits, that leaves the main compartment wide-open for a change of clothes, a packed lunch, or groceries on the way home. Those aluminum hooks & loop points are actually very effective here for smooth one-handed operation. The divider in the space is nice to tuck a notebook or tablet in there for easy removal but doesn’t get in the way if not needed.

If there is one knock on the bag that I have found, it’s that the matte fabrics seem to pick up marks in use. Most of what I’ve seen so far wipes off easily, but I’ve collected some scars. I will be curious to see if these marks start to collect over an extended period of time.

What I like

  • Great build with careful attention to details.
  • Streamlined, sophisticated profile.
  • Ready to handle the elements.
  • Excellent accessibility and pocket design.

What needs to be improved

  • Some external surfaces may show wear over extended use.
  • Tall, wide format may not work for people with a smaller frame.

Final thoughts

The Brooks Pitfield Backpack is a stealth warrior that is buttoned-up enough for the office, yet packed with features for tackling the road. The usability is dialed in on this design, making it easy to live with both on and off the bike. It is one of my favorite bags so far in 2018.

Price: $200.00
Where to buy: Brooks England
Source: The sample of this product was provided by Brooks England.

Filed in categories: Reviews

Tagged:

Brooks England Pitfield Backpack review originally appeared on The Gadgeteer on August 24, 2018 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

IOGEAR USB-C Travel Dock review

REVIEW – USB-C is a great specification, but in practice, it has been a slow, uphill battle to get peripherals that support it.  Many aftermarket manufacturers (such as external hard disks or network adapters) seem stuck on the old USB-A type connectors and the slower speeds that go along with that standard.  A few, though, are forward-thinking and are providing device support for the now common connector.  Case in point: the IOGEAR USB-C Travel dock.  Let’s see how well the dock lives up to the new standard.

What’s in the box?

The USB-C Travel dock with a fixed USB-C connection cable (about 6 inches long).  The hub itself has a gigabit Ethernet port, 3 USB-A ports that support USB 3.0 connection speeds, an SD slot, a micro-SD slot, a USB-C pass-through connector and an HDMI port that supports 4k video at up to 30Hz.

Design and Features

The travel dock is a very well-made device.  The body is aluminum and seamless – and, unlike a lot of other aluminum-encased devices, the dock seems impervious to fingerprints.  The cable connection to your computer is solid and rubber-coated and the USB-C connector is also aluminum-encased.  All in all, this is a device that seems like it would take a beating in your travel bag and yet always be ready when you need it.

The ports are arranged with 2 USB-A connectors sharing the same side as the card slots, the USB-C pass-through and HDMI on the opposite side with another USB-A port, and finally the gigabit Ethernet port at the opposite end from the hard-wired connection cable.

Does it work?

In a word, yes.  And well.

I used the travel dock with my MacBook Pro (mid-2017) and my Surface Book 2.  First, the MacBook: although I have a model which sports four Thunderbolt 3 ports, I dislike the feeling there are octopus tentacles coming out of my laptop.  Whenever possible, I prefer a single connection – and preferably one that does not require multiple adapters such as USB-A to USB-C.  The travel dock allows my OCD to be satisfied – with the USB-C pass-through connected with my Apple USB-C power adapter, I can keep my laptop powered on AC while reading memory cards (something lacking in the Mac lineup), reading and writing with my Samsung T3 external SSD, and driving an external 1080p monitor via the HDMI port at 60Hz.  The pass-through port is a 100-watt port but it reserves 15 watts for the devices on the port, which ends up rendering 85 watts to the laptop if your adapter can supply that.  My adapter supplies 87 watts of power, but in use, the difference did not in any way cripple my laptop with reduced power – my battery charged slower, but I did not experience excess heat or any other power-related issues.

The Surface Book 2 does not currently support USB-C charging (the new Surface Go does, but the older Book 2 does not), so my use was limited to extending the single USB-C port on the laptop.  There are also 2 USB-A version 3 ports on the Surface Book 2, but often I find that I need to have a USB-based Ethernet card and a USB -C to HDMI adapter to support an external monitor.  That leaves only a single USB-A port on my laptop to support external storage – and me having to find an adapter to bridge the gap between the SD card slot on the laptop and the micro-SD card I am holding in my hands.  The travel dock capably handles all this with room to grow.

Transfer speeds are fantastic.  To validate this, I copied files back and forth between a micro-SD card and a network share (connected via the Ethernet port) while watching an HD video from the SSD drive on an external monitor.  Some devices would choke on this scenario (admittedly, not likely a real-world one, but who does real-world stuff in reviews?), but the IOGEAR dock didn’t drop any video frames and still supported about 8mb transfer speeds from the micro SD card.

What I like

  • Solid construction
  • Good array of ports on the dock
  • Pass-through power to keep my laptop up and running

What needs to be improved

  • Nothing – this is a great device as delivered

Final thoughts

I can see the IOGEAR USB-C Travel dock being a mainstay in my backpack for many a trip to come.  From solid build quality to high-speed performance t0 the ability to hit almost any road scenario I can think of, the dock is one of those pieces of hardware that just works whenever you need it.

Price: $99.95
Where to buy: Amazon
Source: Review unit provided by IOGEAR.

Filed in categories: Reviews

Tagged:

IOGEAR USB-C Travel Dock review originally appeared on The Gadgeteer on August 23, 2018 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Zagg Nomad Book tablet case review

REVIEW – There is always the worry, when you buy an expensive case for a device, that you’re going to lose that investment when you upgrade to a new device. Or, perhaps you have a device that is not exactly the market leader and need a case that can be adjusted to fit your device. Well, the fine folks at Zagg have taken these fears into account and answered with the Nomad Book tablet case. I was sent one to test, and am ready to show it to you now.

Note: Photos may be tapped or clicked for a larger image.

What is it?

The Zagg Nomad Book is a keyboard case for tablets in the 9-10-ish screen size range. There are gaskets, button mapping levers, and ways of setting this case up that will handle many different models.

Hardware specs

The top case is configured for use with an iPad 9.7” device of recent vintage, as well as 9.7” devices from Samsung (S2 or S3), as well as the 10.5” iPad. Unless you own several of these devices and want to swap back and forth between them, this is a one-time configuration.

What’s in the box?

Included in the box is a rechargeable Bluetooth keyboard cover (with a charging cable) that is used for all the tablet sizes. It magnetically attaches to one side and can hinge up to cover whichever tablet is installed in the other half of the case.
The top half consists of a basic shell, two gaskets for various sizes of tablet, four button levers to actuate various models of tablet, and a magnetic plate that attaches to the back of the tablet to keep it in the case.

Design and features

A case that adjusts to the size of the device is more desirable for makers than for users, in many ways. Users just want their stuff to fit and not look like the case is meant for another device. Manufacturers don’t want to have to make a custom device for every single form factor on the market. Early in the life of the iPad, it was said: “There is no tablet market, there is only an iPad market.” (Search that phrase to see what I mean.) Everyone wanted their tablet to resemble the size, shape, and weight of the iPad. This has held true for the most popular tablets, so this case can easily accommodate a good swath of the market, but once you’ve set it up for your device, you won’t need the other gasket or button levers. They can be stored in the event you ever want to change the tablet or give the case to another.
To set it up for your tablet, first choose the button levers that correspond to your model and insert it into the case. Next, select the proper gasket and push the stylus holder through the slot for it in the case. (The stylus holder keeps the gasket in place. To change the gasket, push the stylus holder back through the slot.)
Once you have the correct gasket in place, you only have to mount the 4” x 4” magnetic plate to the back of your device with the bonding tape. This prevents the tablet from falling out of the case easily. (In testing, I found it was pretty strong, but if the keyboard was not covering the tablet, there was a decent chance the magnetic hold would release. So, not really a secure attachment method.)

Here is the layout of the magnets in both the base and the attachment plate.


The other downside of the one-eighth-inch thick bloc being stuck on the back of your iPad is that it prevents it from fitting into most all other cases. If you happen to use a folio or slipcase for your bare iPad when not using the Nomad Book, it will make your folio wear oddly, kinda giving your iPad case the equivalent of a “Skoal ring.”


To my surprise, I was able to remove the mounting block with relative ease, and it didn’t really negatively affect any of the stickers I had under it. There was no residue at all on the iPad itself. It stuck back with ease, but I’m not sure how many times that can be done before the stickiness of the magnet block is reduced to nothing.

The top case itself is a nice solid housing for your tablet and has both a kickstand and a stylus sleeve. The stylus sleeve is long and flexible, so it not only holds your Pencil securely, but it’s easy enough to remove that you don’t fear you’re going to snap the stylus in half in the process.


The kickstand feature I have mentioned with other products. I am a huge fan. This one is properly stiff to open and get into place, but then it holds without wavering while you type, tap, and jiggle the table. This is possibly the best thing about this case, to me. It can hold the iPad up from almost completely flat on a surface to past 90º so that you can even use it while watching from a lower angle. With the detachable keyboard, this is not a bad thing. You can have the iPad on a higher shelf while you’re sitting back, but you can still enter information. When it’s in that nearly flat state, however, without the keyboard, tapping can cause it to fall over backward. There’s a sweet spot around 45º where it becomes very stable.

I found the responsiveness of the keyboard to be great. It’s certainly not a clickety-clack mechanical keyboard (which I loathe), but the keys have actual travel, and you can feel them, not like typing on glass or using a membrane keyboard. There are shortcuts for everything I expected, and few that I didn’t, like a way to check the battery status of the keyboard itself.
The keyboard isn’t backlit, but you can pair it with another device besides the one in the stand. (Actually, you can pair it with any 2 devices, in the case or not!) The size and layout is enough larger than the screen keyboard as to seem almost 100%. I found myself having far fewer typos with it than with some other cases I’ve used. I really missed that backlighting, though.
The combination of the magnet, the heavy-duty case, and kickstand, and the keyboard increases the weight of my 1.05 pound iPad Pro 10.5″  to 2 pounds, 10.5 ounces. That’s a huge increase, even given the protection it affords. Also, there is no view port for the iPad’s camera. Sure, you can pop the iPad out of the case to take a shot, but then, what do you do with the case while you’re framing and snapping? And not getting the benefit of the steadiness of the kickstand to help with taking pictures is criminal.

What I Like

  • Holds tablet securely
  • Removable keyboard
  • Easy to recharge both tablet and keyboard while attached
  • Integrated Kickstand

What needs to be improved

  • No camera view port
  • Must use stick-on magnet to use securely
  • Keyboard detaches easily while in a bag, exposing the screen
  • Keyboard not backlit
  • Really heavy

Final thoughts

I really wanted to love this case. When I realized I’d have to stick on a huge square of plastic to use it securely, I was really crestfallen. Having moved from an iPad Air 2 to the 10.5” iPad, I was right in the target demographic. I could move back to the older form factor, or gift this to my Mom, who has the older size. But if it means prying off this growth, and then finding the sticky-tape to reapply it to the next device, it’s really not worth the effort to me.

If the magnetic attachment and occasional in-bag uncoupling don’t bother you, and you can deal with not having a way to take pictures while in the case, you may find this solid kickstand and light, tight keyboard combination a winner.

If you’re one who doesn’t have an iPad, but instead has been trying to find a protective, solid case and keyboard combination for your not-so-mainstream tablet, this may let you get into a case/keyboard combination that you’ll really love.

Price: $99.99
Where to buy: Amazon or Zagg
Source: The sample of this product was provided by Zagg.

Filed in categories: Reviews

Tagged: ,

Zagg Nomad Book tablet case review originally appeared on The Gadgeteer on August 23, 2018 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Pad & Quill Journal Notebook and Deluxe Leather Journal Cover review

No matter how many times I’ve tried to switch to digital task and journaling apps, I always end up missing using my favorite pen and notebook. There’s just something so personal about putting pen to paper and a notebook full of doodles, taped in ticket stubs, photos, and memories means more to me than any app on my phone ever could. For that reason, I enjoy trying new notebooks and covers that protect them. So let’s check out one of each from Pad & Quill.

What is it?

I guess that should say what are they instead of what is it because I’ll be telling you about two separate products being offered by Pad & Quill. There’s the Journal Notebook which is available in two sizes, and the Deluxe Leather Journal Cover also available two sizes and two colors. I was sent the medium size version of each one.

My package arrived wrapped in brown kraft paper with a wax seal which felt very Harry Potter-esque to me.

Inside the package was the A5 sized leather cover in Whiskey brown with an A5 sized notebook inside. Remember, that each of these items is a separate purchase and that a notebook is not included with the purchase of a leather cover.

The leather cover is made of full-grain leather sewed with a tan colored parachute grade thread. The only branding on the cover is the Pad & Quill logo which is stamped on the back cover.

The notebook cover has wide flaps inside to hold the notebook in place and the left side has two card slots sized to hold standard sized credit cards or business cards in the vertical orientation.

As you can see from the image above, the interior of the cover is not lined. The raw side of the leather is visible. The nap is smooth and does not shed or leave crumbs when you insert and remove a notebook.

The Pad & Quill Journal Notebook comes in 8.3in x 5.6in x 0.5in (A5) and 5.3in x 3.7in x 0.5in sizes. I was sent the A5 size.

The notebook has a dark grey linen cover, an expandable pocket, 192 pages of 100 GSM acid-free off-white recycled paper, and is available with either plain or dot graph pages.

The notebook has a 2-page table of contents and all the pages are numbered which is a must-have feature when I’m shopping for a new notebook.

The pages are smooth and easy to write on. I’m not a fountain pen user, but regular ink did not bleed through the pages.

Another nice touch is that the Pad & Quill Journal Notebook has two bookmarks. There’s an orange one and a white one. Even the ends of the bookmarks are sealed so they won’t unravel. Also, you’ll notice that the notebook can lay flat because it uses a Smyth-swen binding which means that you can open it to your desired page and it will stay that way.

It’s easy to insert the notebook into the Deluxe Leather Journal Cover. All you do is slide the front and back covers of the notebook into the cover’s sleeves on either side.

A nice wide black elastic band secures the cover closed.

Check out the French seams along the edges of the Pad & Quill Deluxe Leather Journal Cover. I even discovered that I can clip my pen to the elastic band and it will hold it in place between the covers which is a nice touch. Everything about this cover is first class including the 25-year guarantee on the leather.

What I like

  • Notebook cover is attractive and well made
  • Journal has numbered pages and a binding that lays flat
  • Standard sized cover can be used with other notebooks

What needs to be improved

  • Nothing

Final thoughts

If you share my love of notebooks and pens and have been shopping for a new notebook and cover to protect it. Do yourself a favor and stop by Pad & Quill’s site so you can read more about their new journals and journal covers. They are well made, attractive, and nicely priced.

Price: Journals are $18.66 for the Medium A5 size and $15.26 for the small size, Delux Leather cover is $59.46 and $42.46.
Where to buy: Pad & Quill
Source: The sample for this review was provided by Pad & Quill.

Filed in categories: Reviews

Tagged: ,

Pad & Quill Journal Notebook and Deluxe Leather Journal Cover review originally appeared on The Gadgeteer on August 22, 2018 at 11:10 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

ThiEYE T5 Edge Action Camera review


REVIEW – These days, I frequently say that action cameras are “a dime a dozen”, so I was quite intrigued to review the ThiEYE T5 Edge camera which looks promising enough to seriously challenge the GoPro. Let’s see how it went.

What is it?

This is a GoPro type 4K action camera that takes both video and photos using its 170-degree lens to provide high-resolution wide-angle footage.

What’s in the box

1 x ThiEYE T5 Edge Action Camera
1 x Waterproof Housing
1 x Additional Skeleton Backdoor
1 x Remote Control
1 x 360 Degree Rotating Release Buckle
! x 360 Degree Vertical Release Buckle
1 x Flat Adhesive Mount
1 x Curved Adhesive Mount
2 x Adhesive Stickers
2 x Anti-fog Inserts
1 x Battery
1 x Micro USB Cable
1 x Microfiber Cloth
1 x Cloth Bag
1 x Instruction Manual

Design and features

Manufacturer’s Specifications:


On the front of the camera, there is the 170-degree lens, the Power/Mode selection button, and 2 LEDs that light up blue to indicate recording status and Wi-Fi on/off status. On the back of the camera is the screen display that measures 1″ x 1.75″. The two LEDs on the bottom left of the back of the camera are the recording indicator and charging indicator. They light up blue when active.


On one of the short sides of the camera, there are 2 buttons to navigate up/down through the settings. On the opposite short side, there are 3 ports that accommodate the micro SD card, the micro USB power/charging cable, and a micro HDMI cable.


At the top of the camera is the Wi-Fi/selection button. At the bottom of the camera, there is a 1/4-20″ mount for tripods, monopods, etc, the battery compartment and battery cover. Inside of the battery compartment, there is the serial number sticker that is needed for firmware updates, but it is somewhat difficult to see the serial number.


Along with the camera, there is a remote control that connects to the camera via Bluetooth. It has 3 buttons on it that control turning its own power on, taking photos remotely and starting and stopping video recording. At the top of the logo on the remote is the microphone that allows you to say voice commands like “Action Start Recording” or “Action Photo”. The remote control is not waterproof.

App

The ThiEYE App and the camera connect via the camera’s built-in Wi-Fi. The app allows you to take pictures and video and change settings. The App’s screen presents the photo/video image from the perspective of the lens of the camera. Here are a few of the app screens:




Performance

Depressing the power button with a long press (4 seconds or more) turns the camera on/off. Once the camera is turned on, it is usually in video mode. Depressing the power button in short bursts switches between camera mode, video mode, and settings mode. On the settings screen, there are 4 choices that allow you to control the settings of the camera.

The two side up/down buttons let you toggle between the 4 choices and the Wi-Fi top button lets you select. The front power button also allows you to exit each settings screen.

The ThiEYE T5 Edge Action Camera works like most other action cameras and it has a lot of settings to control the recording and photo modes. The inclusion of both Bluetooth and Wi-Fi to allow remote control from both the included hardware remote control or the app is a great feature, and they both work well most of the time with the exception of the voice control. The instructions indicate that there may be a need to repeat your voice commands that are affected by and respond based on pronunciation. I guess the camera does not like how I speak because thus far I have not been able to get it to work for me. Otherwise, the handheld remote works well. When I tried the camera on my windshield mount as a dash cam, it worked a few times but on a hot day, it froze and could only be reset by removing the battery. I also experienced the “freezing” issue more than once when I was connected to my cell phone via Wi-Fi and I tried to disconnect by powering off the camera when I was done taking photos. When it was connected to the app, it froze on the camera’s W-Fi- screen and could only be reset by removing the battery. I did check their website to make sure that I have the latest firmware.


On another occasion, I decided to take pictures of fruit nicely arranged on a fruit cart. As you can see in the picture below, the camera froze. It was in picture mode and only on for about 10 minutes prior to that moment. I decided not to bother to take the picture since it would have required me to remove the housing and the battery at that moment to restart the camera.


Otherwise, the camera performed well, and the waterproof housing worked. When operating the camera with the waterproof housing installed, the buttons required a bit of extra effort to depress and engage the camera buttons.

Pictures:
(This one on the left was taken on a very stormy and cloudy morning and without in-camera correction. The one on the right was taken in the afternoon with in-camera correction)


(Downtown Brooklyn)


Video:

The quality of the video is good, even on an overcast and foggy day, and the in-camera stabilization and correction work well to produce nice footage.

What I like

  • The waterproof housing remains reliably sealed
  • The 4K footage
  • The remote control via the app and the included remote
  • The numerous customizable settings

What can be improved

  • The buggy software/hardware issue that causes the camera to freeze and stop working in random situations including heat when used as a dash cam
  • The ability to rotate the video in-camera
  • The buttons on the waterproof housing that require more than anticipated normal pressure to engage the buttons on the camera
  • The ability of the voice control to work with various voices and pronunciation

Final thoughts

When I first saw the physical appearance and specifications of the ThiEYE T5 Edge Action Camera, I was very eager to try it. My eagerness was also based on the previous various brands of similar action cameras that I have tested and been quite impressed with. This action camera includes really nice features that are very practical, but the few flaws are too effective to overlook. I missed several opportunities to take photos and videos because of the random freezing of the camera, and the fact that the only way to recover is to remove the housing and remove and replace the battery is simply unacceptable for me. The other issue of repeatedly speaking in a remote to use the voice function and being unsuccessful at it until my jaws were tired, sealed the deal for me. This is a camera with great promise, but unless the flaws can be adequately fixed, I will pass on recommending it.

Price: $129.99
Where to buy: Amazon
Source: The sample for this review was provided by ThiEYE.

Filed in categories: Reviews

Tagged:

ThiEYE T5 Edge Action Camera review originally appeared on The Gadgeteer on August 22, 2018 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.