Zipbuds 26 wireless sports headphones review

There is no shortage of Bluetooth headphones on the market. You can find them for less than $25 on the low end of the pricing spectrum, and to several hundred dollars on the extreme opposite end. What features justify the price for higher end Bluetooth headphones, earphones, and earbuds and would you spend $150 for the interestingly designed Zipbuds 26 wireless sports headphones? Let’s take a closer look.

What is it?

Zipbuds 26 wireless sports headphones are Bluetooth earbuds that feature a built-in sub-woofer and long battery life.

What’s in the box?

Zipbuds
micro USB charging cable
Magnetic charging dock that doubles as an attachable extra battery pack
Quick start guide

Zipbuds also ships with a large selection of ear tips so that you can easily find the best fit and comfort possible for your ears.

3 pairs of Fitness lock stabilizers
3 pairs of C-Lock stabilizers
3 pairs of silicone ear tips
3 pairs of memory foam ear tips

Design and features

If you remove the somewhat odd looking inline modules attached to each Zipbud earbud cable, these headphones resemble countless of other Bluetooth earbuds that you can find on Amazon and other online retailers. But those inline modules are what set the Zipbuds apart from other wireless headphones.

Typically with wireless headphones, there is one inline controller that has a micro USB connector for charging, a power button, and volume buttons. But with the Zipbud 26 wireless sport headphones, there are two inline modules. The module hanging from the right earbud has a power / pairing button on the bottom edge and a multifunction play/pause/call answer/end button on the side. There’s also a volume rocker button and a status LED on the other side. of the inline module.

I like that the volume down button has raised bumps that make it easy to figure out which button raises the volume and which button lowers it.

The module that is attached to the left earbud has four electrical contacts.

The included magnetic charging dock magnetically snaps to the module to charge it. A full charge provides up to 7hrs of talk and playtime with 400 hours of standby time.

The magnetic dock has its own built-in battery that can be used as an extra power bank for the Zipbuds headphones. That means if the Zipbuds run out of juice, you can snap on the battery dock mobile charging clip and keep rocking with your favorite tunes for an additional 8 hours of play time.

Five minutes of charge = 1 hour of play time and the headphones and mobile clip are fully charged in 2 hours.

Fit and comfort

To create the best fit possible, there are several different types of ear tips included with the Zipbuds. You can mix and match the tips for the perfect fit. I tried the C locks first.

Next, I tried the memory foam tips and then fitness locks. I ended up settling on the C locks with regular silicone ear tips which provided me with a secure and comfortable fit.

Even with what would be perceived as being extra heaving due to the inline modules, the Zipbuds are very lightweight. I barely noticed them while I was wearing them and they stayed in my ears even when walking and working out. I’m not a runner, so I didn’t test them with high impact type of activities.

Note that these headphones are sweat and water resistant and designed to survive epic workout sessions.

Audio quality

I was impressed by the audio quality of these wireless headphones when listening to all types of music and even podcasts. Audio is clear and crisp and the built-in subwoofer gives hard driving beats extra thump.

I paired the Zipbuds with an iPhone 7 Plus and really enjoyed listening to music through Spotify and Amazon Music apps.

If I could find one complaint as far as audio is that I noticed that sometimes that volume levels were too loud and even turning the audio all the way down wasn’t low enough before automatically muting the audio. I actually had to play around with the volume limits settings on the iPhone.

Call quality

I wasn’t as impressed with call audio quality or I should say that people on the other end of my conversations weren’t impressed. Calls sounded fine on my end while wearing the Zipbuds but on the other end, people said that I sounded like I was in a can and would ask me to repeat myself.

Final thoughts

You’re not going to find Zipbuds 26 wireless sport earbuds in a bargain bin. This Bluetooth headset is in on the pricier side of the Bluetooth earbud ladder. But are they worth the extra cost? In my opinion – yes, they are. They sound great and they are comfortable to wear for extended periods of time. But the best feature of the Zipbuds is the dock that doubles as a clip on extended battery. This is a great feature that comes in handy when you’re listening to music or your favorite podcast and your earbuds run out of juice. Instead of waiting for them to charge back up, you can just snap on the battery clip and enjoy up to 8 hours of playtime.

Source: The sample for this review was provided by Zipbuds. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $149.99
Manufacturer: Zipbuds
Retailer: Amazon
Pros:
  • Good sound
  • Long play time
  • Clip on battery
  • Comes with lots of ear tip options
Cons:
  • Call audio quality not the best on the receiver side of the conversation

Filed in categories: Reviews

Tagged:

Zipbuds 26 wireless sports headphones review originally appeared on The Gadgeteer on July 30, 2017 at 3:03 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Flowfold Wallets review

Are you in the market for a wallet? I’ve got something new to tell you about. Flowfold is a cool little company out of Maine that sent me a trio of their wallets for evaluation. They’re thin, lightweight, and made from high-tech, super-durable materials. They also rock a modern, distinctive look that stands out from your typical money/card carriers. Pretty cool, right? Let’s check ’em out!

About Flowfold

Flowfold has been creating every day carry products since 2005, featuring a variety of modern and lightweight materials with an emphasis on functional design. Everything is made in the USA, and the company is committed to environmental sustainability and giving back to the community. The term “flowfold” is used in geology to describe layers of rock that flow smoothly together over time; this concept defines their design philosophy and how it translates to rugged, minimalist, interesting carry pieces.

I was sent three wallets to evaluate: a minimalist bifold wallet, a tri-fold wallet and a passport wallet for travelers. Each sample uses different materials, but the whole set demonstrates Flowfold’s approach to consistent, functional, elegant design. 

The Flowfold Sailcloth Vanguard Bi-Fold Wallet

First up is the super-minimalist wallet in the testing lineup: The Flowfold Sailcloth Vanguard Bi-fold Wallet. I’ve been using this as my go-to wallet for several weeks. Here’s a sample picture to give you a sense for what it carries:

The wallet provided for review uses a really interesting base material: high-performance sailcloth with X-ply technology that sandwiches additional reinforced threading between the layers of fabric. This stuff is made for use in racing boats as sail material (literally), and boasts extraordinary durability while being extremely thin and lightweight… while the wallet measures in at a fairly standard 3.25” by 4.25” folded, its only 0.1” thick and barely taps the scale at a weight of 0.7 ounces. That’s ideal if you’re looking for a thin front-pocket wallet, especially if you’re wearing dress pants and don’t want unsightly bulges.

In the sample provided, Flowfold uses a combination of clear fabrics with different embedded thread patterns that give the wallet a slick, modern look (more color combinations in this fabric are available on their web site). There’s a middle layer of solid gray X-pac material, and the interior card slots are faced by another layer of clear X-ply fabric that uses a wider “X” pattern of black threading. It’s a sharp combination that looks good dressed up with a suit or dressed down for casual adventuring. It’s a vey modern-style design, however, so it may not appeal to those who seek a more traditional wallet look. Check out the picture below to see what the exterior looks like:

I thought that the wallet felt a bit plasticky when I first opened it, and expected it to show scratches and folds over time… I should have paid more attention to the benefits of high-performance sailcloth.  For a super-thin construction, it’s really resistant to abrasion and scratches. The wallet also uses ballistic nylon to reinforce all the seams and stress points, including extra reinforcement at the card slots so that they don’t fray as your constantly pulling your credit cards in and out. I have yet to see any signs of wear and tear anywhere in the wallet. Here’s a shot showing a closeup of the detail in the stitching and edges:

From a design perspective, it’s a super-minimalist layout. You have a billfold slot that runs the length of the wallet and two pockets on each side (four total) for your credit cards, ID, etc. The clear material allows you to easily see what’s in the pockets, which saves some time when you’re fumbling for a particular card while in line at the grocery store. The pockets are also slightly oversized so you can fit multiple cards in each slot without feeling like you’re going to pop a seam. It’s easy to use and easy to live with on a day-to-day basis, which is about the best you can expect from a well-designed wallet.

I’m always trying to minimize my daily carry, and the Vanguard is a great choice for this. It’s just big enough to handle some cash, your drivers license and work ID, and a couple of extra cards that you may need for the daily essentials. According to the specifications you could fit 10-16 cards in this wallet, but I would expect that this would get pretty bulky pretty quickly.

If there is one drawback to this particular wallet, it may be the contemporary use of materials. It does have a very smooth surface, which makes it easy to slide in and out of your pocket… but some may be looking for a less “techy” look. I like it personally, but Flowfold also offers this style in a variety of materials that may be more to your liking.

The Flowfold Traveler Trifold Wallet — Limited Edition Heather Grey

The next wallet I tested was the Traveler Trifold Wallet, in a different material. This is a limited edition version and uses X-pac ultra lightweight fabric instead of the X-ply sailcloth material.

The trifold uses a 3-panel design which measures in at 4.4” by 3.1” by 0.2” when fully folded, and weighs 1.1 ounces out of the box. The cash pocket is deeper and wider, allowing for international-sized currency of varying sizes. You’ll also find 6 card pockets here, with a transparent center pocket. You’ll easily fit a dozen cards or more in this wallet, with room to spare for extras (like your frequent-buyer coffee club card, which I find critical for survival).

The material and construction choices here shows the versatility in Flowfold’s design philosophy. You’ll find the same design language used in the Bi-Fold, with different base materials. The X-pac ultra lightweight fabric is an outdoor-use material that is found in a lot of outdoor materials these days, tweaked in this case to present a more refined & classic look while still maintaining the durability and lightweight attributes of the whole product lineup. It’s got a nice textured feel to the material, and a more traditional look (if that’s your thing). Build quality is just as tight as I found in the bifold wallet, with reinforced seams and stitching throughout. Here’s a closeup of the interior flap to give you a sense for the material combination:

Here’s a shot of the center panel, leveraging the clear sailcloth X-ply material:

Just like the Vanguard Bi-Fold, the Tri-Fold model can be had in a variety of different materials including the funky X-ply performance sailcloth. You’ll see a bunch of combinations on their web site if you want to explore other styles.

Overall, I found this wallet to be great for days when I need to carry more stuff, specifically multiple cards. It’s still plenty thin and light but offers you lots of room for extras without getting really bulky. There’s also some nice water- and abrasion- resistance to be had here if your journeys take you off the beaten path.

The Flowfold Navigator Passport Wallet — Limited Edition Grey X-pac

Finally, we get to the Big Daddy of the group: the Navigator Passport Wallet. The version I am testing is a limited edition in Grey X-pac fabric, but they also offer variations on their site in the high-performance sailcloth material used in the Vanguard Bi-Fold wallet that I tested.

This wallet is designed for international travel. It measures 6″ by 4″ by 0.12″ deep, and weighs in at 1.1 ounces. You’ll find a pocket specifically designed for your passport, three card pockets with the clear sailcloth material, and several internal pockets that run the height of the wallet for cash, tickets, receipts, and assorted bits that accumulate while traversing planes, trains, and automobiles.

This version uses the typical X-pac material that’s becoming more popular in bags & carry products today, and it’s lovely to use. It’s lightweight, extremely durable, and water-resistant without any additional coatings or liners. It works quite well here as the primary material choice making for a wallet that, while fairly large, is still super slim and lightweight. The look is clean, classy, and unobtrusive… an important feature when traveling so that you don’t draw undue attention. You can also get the X-ply material in it’s high-tech variations if you prefer,

Here’s a closeup of the seam construction for your consideration:

I was just on a business trip to Germany for work a few weeks ago, and used this as my primary wallet for all my travels. Unlike many passport wallets, this one is thin enough that its comfortable to carry around wherever you go and still keep your passport and essentials handy. As I mentioned above, it also offers some dedicated stash pockets for receipts and tickets on-the-go so that you can throw everything in one place and don’t have to carry around an extra envelope of stuff.

Pricing and Conclusion

There’s something I really like about what Flowfold is doing here. I really dig their modern design aesthetic, attention to detail, and use of innovative materials that don’t detract from the form and function of their products. As a community-oriented company that makes everything in the USA, they are also an easy company to like.

Here’s where it gets better: Flowfold’s wallets are very well-priced, ranging from $29 to $45 depending on the style and materials choices, with some super minimalist styles coming in at under $20. That’s a great buy for unique products using cutting-edge materials, made by a company you can get behind. They also stand by everything they make with a lifetime warranty. It doesn’t get much better than that. For more information and to check out their whole lineup of wallets, bags, and apparel, check out the Flowfold web site.

Source: The sample for this review was provided by Flowfold. For more info visit their site

 

Product Information

Price: $12 – $45
Manufacturer: Flowfold
Pros:
  • Minimalist design
  • Cutting edge materials
  • Excellent construction and finish
  • Thin and lightweight
Cons:
  • May not appeal to those that prefer traditional design and materials

Filed in categories: Reviews

Tagged:

Flowfold Wallets review originally appeared on The Gadgeteer on July 30, 2017 at 9:30 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Bishop Curry V, a 10-year-old boy, has developed a device to help save kids from hot car deaths

Living here in Texas, I sometimes hear news of a child dying tragically in a hot car. This kind of news is incredibly heart wrenching, but Bishop Curry V, a 10-year-old boy from McKinney, Texas has invented a device that could potentially save children from such a tragedy. He had heard of a child’s death near his home and having a baby sister, was inspired to try to find a way to save lives. Bishop has named his device “Oasis” and has developed a 3D model of it thus far (the above photo shows Bishop holding the model; photo from Curiosity). The concept is that the Oasis will sit at the top of a car seat to “detect when a child has been left inside a hot vehicle and alert parents to the child’s situation. The device will also come with the technology to help cool down the child while he or she waits to be rescued” (from Bishop’s GoFundMe website). Bishop has already raised $48,000 of his $20,000 goal since January 2017 to develop the device. “ALL of the funds that you donate will go towards the attorney fees needed to finalize the patent, prototyping fees, and to help identify a manufacturer” (GoFundMe website). Bishop Curry V and his father, Bishop Curry IV, an engineer from Toyota’s American Headquarters in Plano, Texas, have presented the invention at an auto safety conference in Michigan (from nbcdfw.com). You rock Bishop! I can’t wait to see the Oasis in stores! Perhaps it should be preinstalled on all car seats…

Filed in categories: News

Tagged:

Bishop Curry V, a 10-year-old boy, has developed a device to help save kids from hot car deaths originally appeared on The Gadgeteer on July 30, 2017 at 8:26 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Saddleback Leather backpack, TREBLAB J1 earbuds, 5 summer gadgets, and more – Weekly roundup

Quick before you do anything else, click through and check out a list of all the news, articles, and reviews that we posted this week on The Gadgeteer.

Reviews

Articles

News

Filed in categories: News

Tagged:

Saddleback Leather backpack, TREBLAB J1 earbuds, 5 summer gadgets, and more – Weekly roundup originally appeared on The Gadgeteer on July 29, 2017 at 10:35 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Deal: 20% off Samsung SmartThings ends today!

Samsung SmartThings is having a sale until the end of the day, Saturday, July 29. They are offering 20% off the entire inventory at their online store. Head over to https://shop.smartthings.com/sale to take advantage of this offer to enhance your home with ZigBee, Z-wave and Wi-fi automation. The sale items include the SmartThings Lighting Kit, SmartThings Home Monitoring Kit and the Convenience and Entertainment Starter Bundle, as well as individual sensors, lamps and controls available on their site.  The kits include the SmartThnigs hub and a selection of sensors, lights and controls at bundle pricing and is a great way to break into home automation. The individual sensors include items by Samsung, Leviton, Sylvania, GE, Yale, and Aeotec.

Filed in categories: News

Tagged: ,

Deal: 20% off Samsung SmartThings ends today! originally appeared on The Gadgeteer on July 29, 2017 at 3:22 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.