AboveTEK Universal Tablet Stand review

Since buying my new iPad Pro 10.5 I have not bothered to look into or purchase any new accessories for it. It’s not that I couldn’t use a new stand or cover (okay I did buy a new Smart Cover), it’s that I haven’t come across any new products that fit a need or necessarily excite me. That was until AboveTEK offered me a chance to review their Universal Tablet Stand or Elegant Tablet Stand as it is listed on their website.

Note: Images can be clicked to view a larger size.

What is it?

The AboveTEK Universal Tablet stand is designed to hold all tablets from 7” to 13”. The base and base components seem to be made of aluminum and the adjustable tablet holder is made of plastic with rubber grips.

What’s in the box?

  • Base
  • 10” tablet holder
  • 13” tablet holder
  • 2 screws to attach the tablet holder to the stand
  • Phillips/Hex wrench
  • Small Hex wrench

First off, I must say, that when my Universal Tablet Stand arrived I encountered an issue when I tried to assemble it. The screw that is used to attach the tablet holder to the stand base would not tighten down enough to keep the holder snug to the base. I contacted AboveTEK regarding the issue and they sent me out a replacement promptly. Some assembly is required, but as you can see from the instructions it is not difficult. I will also note that all the tools needed to assemble the stand were included.

Assembly of the AboveTEK Universal Tablet Stand only took about three minutes to do it. From the front of the stand, you can see the tablet holder (in my case I am using the 10” tablet holder) and the base of the stand itself. The grey on the tablet holder is a rubberized material made to grip your tablet and hold it firm.

From the sides of the tablet stand you can see the up/down pivot point and the tablet holder attachment point. You can rotate the tablet 360 degrees and it has a wide range of tilt. You also get a sense of the style of the stand from the sides.

The back of the AboveTEK Universal Tablet Stand has a cutout that allows you to thread a cable through it and two screws that hold the tablet holder mounts to the tablet base. From the back, you can also see a hole and a line on the white tablet holder. This is to allow you to grip the tablet holder and lift it to slide your tablet in. This is spring loaded so it will clamp down firmly on your tablet and keep it in place.

I have included a comparison picture of the two tablet holders so you can see the size difference. I am using the smaller of the two for my 10.5” iPad Pro.

As you can see by the picture with my iPad in place the clamps on the tablet holder are unobtrusive and they keep my iPad firmly in place.

So, what’s my bottom line here? First, let me explain how I use tablet holders. My main holder that I have been using for several years is one I reviewed for Cooler Master Duo and I use it on my desk where I do most of my writing. That won’t change with this stand. My secondary location, the location that I use my iPad a lot more, is in my gaming area. The reason that the AboveTEK Universal Tablet Stand will be used there is its versatility. I use my iPad a lot when gaming on my Xbox and unfortunately some of the apps I use only have portrait mode capability. AboveTEKs Universal Tablet Stands ability to rotate from landscape to portrait modes fast and easily makes it great for my gaming needs. I am in no way saying this stand would not be great for desktop or any other application, it would, but I have a desktop stand already that I am happy with. To further that point I will say that there is a convenience factor with my current stand since I am up and down from my desk so much I pull my iPad in and out of my holder a lot. Having to pull my iPad in and out of the grips of the AboveTEK stand several times a day seems impractical to me. When I game I am usually there for a couple of hours minimum where having my iPad firmly secured is a must. Currently, at the time of this writing, you can purchase an AboveTEK Universal Tablet Stand for $45 on the AboveTEK website or amazon.com (down from $70). In closing, I would say if you are looking for a well made, well thought out tablet stand that offers versatility in how you use it, you should consider this one.

Positives

  • Solid design
  • Versital in its use
  • Adjust to several tablet sizes

Negatives

  • None

Price: $45.00
Where to buy: Amazon
Source: The sample for this review was provided by AboveTEK.

Waterfield bags, Flexispot bike desk, Gift guides, and more – Weekly roundup

Is it just me, or are the days speeding by lately? It seems like just yesterday it was Thanksgiving and now we’re only 9 days away from Christmas. If you feel like you need to slow things down, I have just the thing for you. Go find a comfy chair, put on some holiday tunes in the background and check out a weekly list of everything that we’ve posted this week.

Reviews

Articles

News

Vibes Audio brings modular accessories to iPhones and Samsung phones

Have you been envious of Moto smartphone owners and their moto mods like the Hasselblad True Zoom Camera Moto Z Mod? Now you can add a similar capability to iPhone 6 – 8, and Samsung Galaxy S7 and S8 phones with Vibes Audio’s ROXON modular system.

The ROXON system consists of a BASEROX phone case, VIBROX IPX7 waterproof Bluetooth speaker which features a Vibration Sound Engine, and the VOLTROX 3000mAH battery pack. When you what to share your music, the VIBROX snaps on the back of the BASEROX case to offer full sound while keeping thins thin. When it’s time to charge your phone, remove the VIBROX and the VOLTROX snaps on the back of the case.

The ROXON modular system is priced at $29.99 for the BASEROX case, $129.99 for the VIBROX Bluetooth speaker, and $49.99 for the VOLTROX. For more info visit vibesaudio.com

Waterfield Air Porter carry-on bag review

Earlier this year, I reviewed the Waterfield Maverick Laptop Messenger Bag and loved it for its leather which gets better looking as it’s used and abused. Waterfield’s new Air Porter carry-on bag serves a different function and wasn’t made to compete with the Maverick—but it sorta can. The Air Porter may be made to be a carry-on bag for air travel (we’ll get into that later), but it can easily be an all-around bag for work and car trips. Waterfield based the Air Porter’s design on feedback they received from their customers using an online survey. Waterfield addressed as many requested features as possible and the result is a bag that can do just about anything required of a bag—and then some.

The Waterfield Air Porter bag isn’t covered in leather like the Maverick bag. The bag I’m reviewing is more similar to the Waterfield Bolt backpack and briefcase with its waxed canvas and leather trim appearance. Like leather, waxed canvas looks better with age, but doesn’t have that “cachet” the Maverick has. No matter, because in the weeks I’ve had the Air Porter, I’ve come to depend on its sheer usefulness. This is a bag that means business. It’s the size of a briefcase and can hold a bunch of stuff. At the time of writing this review, Here’s what I have stuffed inside the Air Porter: Various paperwork, 12.9 in. iPad Pro (inside a thick Speck case), 3 pairs of earphones for future reviews, four charging cords with plugs, two portable chargers, two flashlights, eye medicine, card key for the office, wallet and car keys. All that and the Air Porter is not even half full.

The Air Porter bag measures 10.25” H X 4.5” W X 15” L. Waterfield sized the bag to fit within TSA’s sizing guidelines for air travel. This size allows the bag to be stowed upright under an airline seat while still leaving room for feet. It also opens flat for easier TSA screening and access to the laptop compartment.

As I said, the construction of the Waterfield Air Porter bag is waxed canvas. The canvas has been made water resistant, so getting caught in the rain is not a problem. Plus the bag’s zippers are waterproof. For the record—I really like these zippers. They are smooth and are almost invisible when closed—another nice design touch borrowed from the Bolt line.

Note that the Air Porter also comes in a black ballistic nylon material. This gives the bag a smoother, more professional look, but is every bit as tough—if not tougher than canvas. I try to be as unprofessional as possible, so the more casual canvas look is my preference.

The front of the Air Porter bag has a large pocket and smaller zippered compartment, all hidden by a leather flap that magnetically closes. This clever flap adjusts to accommodate more or fewer items. The interior is lined in a burnt-orange colored nylon fabric. This color is more tasteful than the bright orange found inside some bags and backpacks, yet still serves as a nice contrast so items are be easily found without having to shine a light inside. Like many carry-on bags, the back of the Air Porter has a wide, sturdy slot for slipping over rolling suitcase handles freeing up hands and shoulders. Both ends of the Air Porter have large, vertical pockets for water bottles. When not in use, these pockets can collapse and snap closed.

One of my minor complaints about the Maverick bag was the way the strap was sewn into the bag itself. I had issues with usually having to untwist the strap before I could use it. That’s not an issue with the Air Porter. The adjustable strap has clips on each end that swivel, so there is no wrong way to throw the bag on your shoulders. The strap also has a wide padded section which makes using the bag much more comfortable, especially if weighed down. The strap is removable if you prefer using the bag’s sewn-in leather carry handles.

The Waterfield Air Porter has a total of 17 pockets and spaces. The main compartment has a large open area with large and small pockets lining its sides. The larger pockets are made of the same orange nylon, while smaller pockets are a black, stretchy mesh material that can hold irregularly shaped objects. There is also an attached key chain with a carabiner which can help save some time searching for lost or misplaced keys.

The second open compartment is divided into two pockets. One is felt-lined for either a laptop or iPad. The pocket has cutaways on both ends for charging cables to slip through for easy charging while the bag is closed—a nice touch. My large iPad Pro with its oversized case fits perfectly into this pocket. The other large pocket also has two smaller pockets attached. This is perfect for paper, magazines, and other flat items.

If you can’t find room for everything you need to carry, there’s an optional Air Caddy. This pouch can be purchased separately or along with the Air Porter. With its many pockets, the Caddy allows you to pack items you need more often, such as a smartphone, cords and such. This way—as on a flight—the larger Air Porter can be stowed either under a seat or in the overhead bin while the Air Caddy can be placed in the seat pouch within easy reach. The Air Caddy is even large enough to hold a regular-sized iPad. Heavy-duty zippers protect what’s inside. The Air Caddy easily fits either inside the Air Porter’s main compartment or front pocket.

The Waterfield Air Porter carry-on bag is a perfect bag for traveling. It’s large enough for just about anything you want to carry, yet small enough to fit under airline seats for easy reach. And it’s TSA friendly—a big deal in today’s world. It’s always fun to see what products Waterfield is planning and the Air Porter was worth the wait.

Positives

  • Extremely well made
  • Can take abuse
  • Room for just about everything
  • TSA friendly
  • Comes with optional extra pouch
  • Hand-made in the USA

Negatives

  • Expensive

Price: $359
Where to buy: Waterfield Design
Source: The sample for this review was provided by Waterfield Design.

Get the best purchase price using the Slice app or the price protection features of your credit card

Did you purchase something with your credit card only to discover a little while later that it had gone on sale? If it was only a couple of dollars, you may not be too worried about that, but what if it was $20 or more? The easiest thing to do is call and see if the merchant will do a price adjustment for you and refund you the difference.



You could also use a new feature in the Slice app which will automatically request a refund on your behalf if it finds that the price has dropped on an item you’ve purchased, but you must link your credit card to your Slice account (works only with supported merchants). Here’s the catch: they do this for a 25% cut of your refund. Slice is a package tracking app available for Android and iOS devices and allows you to link up to three email accounts. After which it combs through your messages searching for your online purchase emails. It will then inform you of the shipping status of those purchases.

If you are already a Slice user, when you open your app you may see the first two screenshots above telling you to provide the information necessary to link a credit card with your Slice account to start the process. If you do not see the first two screenshots, then all you have to do is tap on the following: the Menu icon > Settings > Link Credit Card and enter the data to link your credit card (as shown in the right screenshot above).

If you don’t want to have to keep up with price drops then this may be beneficial for you because something is better than nothing. Although in all the time I’ve used Slice (five years or so), I’ve never been informed of any price drops and I know there have been some because I personally have caught at least three.

So let’s move on to a more lucrative process to receive a price drop refund.

Some credit cards have price protection benefits that they offer to their customers (which is different from purchase protection benefits that include coverage for damaged or stolen goods over a 60 to 90-day period from the date of the purchase, etc.). Cards like Discover, Citi, and Chase Freedom provide price protection for their customers such that if the price of an eligible identical item drops at a store (in-store or online) within a 90-day period (60-day period for Citi), they will refund the difference up to $500 per item with a maximum of $2500 per year.

To start the process of obtaining your refund, you must submit a claim by calling the credit card company. With Citi, after you purchase the item, you need to log into their website and go to the Card Benefits section, click on “Start a price rewind”, enter the item in and they will start looking around for better prices for you for the 60-day period. That’s a bit of a pain compared to other credit card companies.

Be prepared to be able to provide receipts, the credit card statements that the items were purchased on, and a copy of the printed or online advertised sales. There are exclusions, so be sure to check your credit card company’s price protection details to make sure your purchase qualifies (Discover, Citi, and Chase).

There are sure to be many other credit cards out there that provide this benefit, so go online or call your credit card company and save some money!

You can download the Slice package tracking app for Android and iOS.