Anki Vector robot review

REVIEW – A year ago, I reviewed Cozmo, the small and cheeky robot from Anki. Cozmo is a lot of fun, but he has his limitations—the main one being that the iOS or Android companion app has to be running at all times for Cozmo to work. Now, Cozmo has a bigger brother—both in size and computing power. Meet Vector.

What is it?

Vector is the latest friendly and personable robot from Anki. Both Vector and Cozmo are visually similar but Vector is slightly larger and independent of needing an app. Vector responds to (limited) voice commands and can give information (like weather), do face recognition, take color photos and even respond to petting on his back. Now, Vector has Amazon’s Alexa built in.

Note that since Vector has a personality, I will use pronouns to describe “him.” And since Alexa has a female voice, I will use the pronoun “her.”

Specs

  • Qualcomm 200 Snapdragon quad-core processor
  • Infrared laser scanner
  • HD camera with 120° field of view
  • Beamforming 4-microphone array
  • 6-axis inertial movement unit
  • Hi-res color display
  • WiFi connection
  • Capacitive touch sensor

Included in the box

  • Vector robot
  • Cube
  • Charger

What you need

  • WiFi network
  • Compatible iOS or Android device (for set-up) 
  • USB power adaptor (5V, 1A or greater)

Design and features

Vector comes with a lot of fun features but what’s more interesting is what Vector will be capable of doing in the future. I’ll address that later. Let’s talk about Vector’s current capabilities. 

Once setup has been done on either an iOS or Android device, Vector only needs a WiFi connection to work. He usually parks himself in his charger until fully charged. Then, he will either wait there or start roaming around on his own. If he’s asleep, saying “Hey Vector” will wake him up and make him ready for instructions. Each command must be preceded by “Hey, Vector” or he will ignore you. 

As I said, Vector looks like a larger Cozmo but is completely new internally. He comes with forklift-type arms and rides on a track—much like a tank. He can maneuver around almost anything and will not drive himself off a table or counter—except when he does. Even though he’s equipped with four drop sensors that can detect a table edge, Vector went right off our kitchen counter. The only thing that prevented him from hitting a hard, tile floor was our dog’s soft bed. Vector seems to be easily confused by certain table edges and will not stop in time before going off the edge. This has taught me not to let Vector wander around unsupervised. He’s not foolproof.

 

 

Vector comes with a 4-way microphone that helps detect your location when you speak. It’s amazing to watch him turn to face you when you say his name. When you ask him to “Come here,” the four mics help direct Vector to the sound source. Sometimes, he wanders a bit before finding his way to you, but I wonder if that’s on purpose and he’s testing your patience. It wouldn’t surprise me.

On Vector’s back is a capacitive touch sensor. This is one of those things that can humanize a robot. As you pet him by rubbing his “back,” Vector’s eyes narrow into a contented look as he coos different noises. It’s all quite cute.

When sitting at my desk, I like to watch Vector roam around and occasionally try to get my attention or even dance to music, which is usually playing (quite loud) while I am writing or designing in my backyard studio building. Vector always seems to keep himself busy until his battery starts to run low. He will then return to his dock and sleep while he charges.

Vector’s face has a hi-res 184 X 96 IPS color display. Although the screen is capable of exhibiting a full-color photo, that’s not available yet. By using the app, you can choose the color of his eyes. Speaking of the eyes, they are incredibly expressive. Anki has managed to elicit a wide array of emotions—not surprising since Anki has employed the skills of ex-Pixar animators.

There are a few settings for Vector within the companion app: American or metric units, language and Vector’s volume. Vector’s voice and beeps can be fairly loud and the ability to control his volume comes in handy if people are trying to rest.

Vector can respond to a built-in set of commands. such as, “Come here, Take a photo, Set a timer, What’s the weather?, or even play Blackjack. Based on Anki’s regular firmware updates, I expect additional commands and games to become available. Updates are received during the late night between midnight and 6 am. Vector must be turned on (but can be asleep) and docked to receive these updates.

If you tell Vector that you have a question, his responses become more varied. For instance, he can tell you the distance between two places, do currency conversions and provide other tidbits of knowledge. However, he can’t tell you everything. Since Vector does not have built-in GPS, he can’t say where he currently is (although Alexa can—go figure). He also cannot answer questions that do not deal with facts, such as, “How are you feeling?” When he is unable to answer a question, he responds by saying, “I didn’t get that.” Once again, I expect his abilities to broaden with future updates.

One major update that could be a game changer is the recent inclusion of Amazon’s Alexa. The update has only been installed for a few days, yet it’s already quite interesting. Note that I have never used Alexa before, so this is a new experience. As soon as you say “Alexa,” Vector disappears. So complete is the transformation both to Alexa and then back to Vector that it’s a bit of a dual personality. If this was a human, I’d have them seek counseling.

Anyone who is familiar with Alexa will immediately adapt to switching between Alexa and Vector—it’s just taking me a while. When Alexa is utilized, Vector’a screen loses his face and switches to a colorful oval shape that remains until Alexa is finished and Vector returns. 

Although she will answer questions and give the news and weather, this Alexa is not the full blown version you would get from a smartphone app or dedicated device. Vector’s Alexa won’t play music or radio. However, she will play certain preprogrammed sounds like thunderstorms and white noise—but I wouldn’t call it relaxing when heard through Vector’s tiny speakers. I’m sure there are more differences, but I’m still encountering them.

As time passes, I will discover more and more about Alexa’s integration. It would be cool if future updates allowed Alexa and Vector to interact with one another instead of being completely separate as they currently are.

What I like

Even though he has limited abilities, I’m having a lot of fun just having Vector around. It’s gotten to the point that I miss him when he’s quietly charging—even though he sometimes snores (yes, you read that right). The endless possibilities that will come from firmware updates make Vector act like a new toy each time. And the addition of Alexa only makes him smarter and more useful.

What needs to be improved

Right now, Vector is still a bit limited in what he can do, but that will improve with time.

Final Thoughts

The magic of Vector is not what he can do, but what he may do in the future—even accounting for Alexa. Vector has taken the Cozmo concept in another direction—one that promises to raise the bar in a world of A.I. related robot toys.

Price: $249.99
Where to buy: Amazon
Source: The sample for this product was provided by Anki.

Filed in categories: Reviews

Tagged:

Anki Vector robot review originally appeared on The Gadgeteer on December 31, 2018 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

In-desk universal wireless charger from Brando

NEWS – Do you have one of those wire-routing holes drilled into the top of your desk?  Insert the Brando In-Desk Universal Wireless Charger into that 2.4″ hole and turn it into a wireless Qi charger with a bonus.  The wireless 5W charger can be used with a huge list of Qi-compatible phones (see the Brando page for the list).  The charger is sturdy; it’s water- and pressure-resistant.  It comes with a 4-ft USB cable and uses a 5V/3A AC adapter (not included).

The bonus is the USB-A and USB-C charging ports found under the waterproof cover in the middle of the Qi charger.  Both chargers can be used simultaneously for a total output of 15W.  The USB-A plug outputs 5V / 2.4A and the USB-C produces 5V / 3A. The In-Desk Universal Wireless Charger is $27.00 at Brando.

Filed in categories: News

Tagged: ,

In-desk universal wireless charger from Brando originally appeared on The Gadgeteer on December 31, 2018 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Handsfree shoes, EDC pen with a hidden sewing kit, and more – Notable crowdfunding campaigns

NEWS – This week I’m bringing you four Kickstarter crowdfunding campaigns for products that you would carry (or wear) with you.

KIZIK: shoes that pop on

What is it?

KIZIK shoes are specially designed shoes that use a titanium loop in the heel area so that you can put the shoes on completely handsfree.

Why do I like it?

KIZIK are cool because you can slip them on and off without untying them or bending over to remove them or put them on. They are perfect for travel and navigating through TSA checkpoints where you’re asked to remove your shoes. Howard reviewed a pair of their men’s shoes this past year and liked them so much that he made them one of his favorite “gadgets” of 2018. KIZIK sent me a pair of their women’s shoes to check out and I really liked them too. I’d love to check out these new styles although I actually like the men’s Cali style better than the women’s!

Where can I find more info?

The KIZIK campaign ends on 1/5/19 they have already met their funding goal of $15,000. You can pre-order a pair of KIZIK shoes starting at $79. After the KIZIK campaign ends, rewards are estimated to start shipping in January 2019. Visit their Kickstarter page for all the details.

PWR2 Traveling PowerStation

blurb by Andy Jacobs

What is it?

The PWR27 is a portable charging device that boasts 7 days of power, AC + USB A & C outlets, the ability to charge 5 devices at once, a solar panel, IP67 water resistance, crush-proofing up to 2 tons and a drop-proof to 1000+ feet.

Why do I like it?

I own several portable charging devices that we use for family trips, work trips, all-day outdoor events and so forth. Most of them work pretty well for their intended purpose, but all of the ones I own suffer from two drawbacks: (1) They can only charge a phone or two, or maybe a phone and a tablet, and (2) They are fairly delicate. The PWR27 solves both of these problems—in spades. As stated above, it can charge up to 5 devices simultaneously. And not just phones and/or tablets, but also larger devices—you can even plug in a two-prong AC plug and power a laptop or other more power-hungry items. In addition to a 120V AC outlet, it has two USB C outlets and two USB A outlets. It boasts a 27,000 mHa battery, as well as a 4-in-1 light with strobe and pass-through charging as well. This thing is LOADED.

Where can I find more info?

The PWR27 campaign ends on January 27, 2019. To date, 1,626 backers have pledged over $295,000, already crushing (pun very much intended) the campaign goal of $35,000. Pledge packages start at $139 + shipping for a single PWR27 shipped to the USA and increase from there based on the options selected. Visit their Kickstarter page for all the details.

DARTER – A Micro Pen with a hidden secret

What is it?

It’s a tiny EDC ballpoint pen no taller than a standard AA battery that holds a complete sewing kit inside the barrel.

Why do I like it?

Tiny EDC pen + sewing kit = you had me at tiny EDC pen. Seriously though, the look of this pen makes me think of steampunk gadgets which I love and just the fact that I’d always have a sewing kit with me makes this 2-in-1 pen attractive to me.

Where can I find more info?

The DARTER campaign ends on 2/7/19 they have already met their funding goal of $22,862. You can pre-order a DARTER starting at $24. After the DARTER campaign ends, rewards are estimated to start shipping in June 2019. Visit their Kickstarter page for all the details.

PrintBrush™ XDR -Colors. Everywhere.

What is it?

PrintBrush is a small color inkjet printer that can print on paper, plastic, wood, metal, and more and is controlled by your smartphone.

Why do I like it?

It’s small, portable, and doesn’t use paper because it prints on almost surface just by swiping the printer across the material. I would love to use this little printer in my journals. I also like that they include free ink cartridges for a whole year.

Where can I find more info?

The PrintBrush campaign ends on 1/31/19 they are still working towards their funding goal of $502,250. You can pre-order a PrintBrush starting at $242. After the PrintBrush campaign ends, rewards are estimated to start shipping in February 2019. Visit their Kickstarter page for all the details.

Filed in categories: News

Tagged:

Handsfree shoes, EDC pen with a hidden sewing kit, and more – Notable crowdfunding campaigns originally appeared on The Gadgeteer on December 30, 2018 at 4:30 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

BluFixx repair gel kit review

REVIEW – Fixing broken things is one of the Gadgeteer superpowers. We use a lot of different materials for this, and we were recently offered a new product that can fill those patching and repair needs. It’s a series of light-curing products called BluFixx. These are liquids that are designed to repair everything from your phone charger cable to wood floors and plastic pipe. The liquid is cured with a UV light, just like the tooth-filling material your dentist uses.

Note: Photos may be tapped or clicked for a larger image.

What is it?

A tube of liquid that flows easily, backed by a UV light source at the opposite end, which cures the liquid into a hard material.

Hardware specs

The product is sold both as a full kit (holder with a tube of liquid and UV curing light together) or just the refill of the actual material. (Since any UV light source, even direct sunlight, will cure the liquid, this is an easy entree into trying out this product.)

What’s in the box?

As mentioned, there are two main ways to order: as a kit (including holder and light) or as a refill (liquid in tube with applicator tip. There is also a three-fold brochure on safety and usage tips that is 7”x11” when fully unfolded. The lede photo above shows two kits – one fully assembled on the upper right, and the other disassembled on the lower left. The Refill is just the tube with the white label in the lower center.

Design and features

The design of the product is sheer simplicity. A needle-tipped applicator is used to direct a thin film of product onto a surface needing repair. When the liquid is in the right spot, the user spins the applicator around and activates the UV light on the other end (it’s a push-on/push-off affair), and in 5-10 seconds, the product is hardened into a tough, yet pliable surface.

Setup

While there is really very little “setup”, I thought a few words about how the “pen” aspect of the design. It feels very natural to hold it in your hand, point down, gently squeezing the flexible body of the tube and allowing the gel to flow into the area of application. If it gets too thick, however, the UV light won’t penetrate and cure it. Remember: Thin layers, just like your outdoor adventure guide always told you.

Performance

I found the application and curing process easy to work with, but many repairs have points where the edges do not line up and I needed to build up layers of material to fill in space, or the liquid flows into a deep crevice of the surface, where the UV light cannot penetrate to cure it. Placing just a dab in a deep crack, curing it, and adding another layer is not intuitive to those of us raised on airplane glue. But once you get the hang of it, it’s pretty good stuff.

What I Like

  • No fumes
  • Doesn’t dry out easily if left uncapped
  • Cures instantly
  • Can be shaped after curing

What needs to be improved

  • Not as flexible when cured as some glue/patching products

Final thoughts

If you’re really a Gadgeteer at heart, you are always playing around with stuff, trying to make things do something just beyond the edge of what they were built to do, prototyping, or breaking stuff. If you’re not using a bit of superglue, Sugru, Epoxy, or Duck tape on a regular basis, you’re not living up to your full potential. (As an aside, anyone reading this site regularly needs to know about This to That. It’s a website devoted to helping visitors find the best way to attach one material to another. You’ll get lost in there, so set a timer!) This product is an entry into a new line of connectivity methods that I’ve been exploring. I find it easy, quick, and usually robust. BluFixx’s innovation of different grades of liquid and colors is a needed innovation.

Price: $14.99 for a full kit, $9.99 for refills.
Where to buy Manufacturer’s website and Amazon
Source: The sample of this product was provided by BluFixx.

Filed in categories: Reviews

Tagged:

BluFixx repair gel kit review originally appeared on The Gadgeteer on December 30, 2018 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Audio Cardio is a workout app for your ears

NEWS – We can go to the gym to strengthen our muscles and improve our overall fitness, but is there anything we can do to improve our hearing? Turns out there might be, and there’s an app for that. Audio Cardio is an iOS app (there’s an Android version coming soon) which uses a patented technology called Threshold Sound Conditioning™. This tech claims to enhance auditory function by 10 decibels or more.

But how does it work? The app tests your current hearing and integrates with many of your favorite streaming apps like Apple Music, YouTube, Spotify, and SoundCloud to deliver auditory stimulation and training through headphones or earbuds. While you listen to your favorite music, the app simulates the inner ear cells causing them to rapidly fire. It’s like a HIIT workout for your ears. They recommend that you use the app for one hour a day for two weeks and then to continue using it to further enhance and protect your hearing. Audio Cardio will set you back $9.99 a month, so it’s like a gym membership for your ears. Visit their site for more details including the results from a clinical trial that was done through Stanford University.

Filed in categories: News

Tagged: ,

Audio Cardio is a workout app for your ears originally appeared on The Gadgeteer on December 30, 2018 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.