FlexiSpot M4B Corner Standing Desk review

Standing desks have been gaining in popularity for years since various studies were released warning of the dangers of prolonged sitting. There are now tons of standing desk options to fit every type of home or office environment. The FlexiSpot M4B Corner Standing Desk is a great, affordable choice for people who have an existing standard desk that they would like to use as a standing desk. The Flexispot desk is constructed of fiberboard and steel and once assembled is very sturdy and balanced. This particular model comes with an optional keyboard platform and is designed to be used in a regular or corner desk configuration.

The Flexispot desk comes delivered in a rather large box that weighs about 53lbs. Make sure you have help when lifting it.

It is very difficult to lift the desk out of the box from the top. The best way to extract the desk is to lay the box flat, cut open the sides, and open the box by lifting the front cardboard flap up.

The desk comes partially assembled. All that is required is to attach the optional keyboard platform and two protective caps that go over the main cross joints.

The included protective caps snap easily over the left and right cross joints.

Flexispot includes four cord organizers to route cords out of the way of hinges and joints. There is also a provided bolt for an ergonomic monitor mount which is sold separately.

The Flexispot desk can be used with or without the included keyboard platform. Assembling the keyboard platform is very simple. The two keyboard brackets fit perfectly into two indentations on the underside of the main platform.

The only tool required for assembly is a standard Phillips screwdriver. Learn from my mistakes and be sure to consult the instructions first because the brackets can fit on to the platform upside down. Once configured correctly, the keyboard platform brackets attach securely with eight wood screws. Be careful not to over-tighten the screws though, because it is very easy to strip right through the fiberboard.

The assembled keyboard platform then hooks in under the main workspace. The platform is secured in place by left and right pre-installed knobs. Simply loosen the knobs, hook the platform into place and then hand-tighten the knobs.

You’re not required to secure the Flexispot desk to your existing desk in anyway, it just sits on top of it. Once in place it’s very easy to adjust the height of the Flexispot desk. There are adjustment levers conveniently placed on either side of the main platform. Squeeze these levers simultaneously while holding on to the sides of the platform and you can lift or lower the desk into any height you like. Flexispot indicates that there are 12 adjustment levels, but I didn’t find that the desk “clicked” or settled into any particular spots.

The Flexispot has a “gas spring hovering system” which allows you to adjust the desk smoothly when fully loaded. Keep in mind that the workspace and spring system have a maximum indicated weight limit of 33lbs.

The Flexispot desk can adjust from low height of 5.9″ to a high setting of 19.7″. Whereas some similar standing desks extend out as well as up, the Flexispot desk moves straight up and down within its own footprint.

We use the Flexispot desk for our PC Virtual Reality/Edit workstation. This PC is used mainly for video editing and rendering as well as for testing our 360° videos and VR apps. It’s great to have the option to lower the desk into a traditional sitting position for long editing sessions and then be able to raise the desk for VR and 360° video demos.

I was initially concerned that the lowest setting of the desk would be too high to work at while seated. I soon found though that the low-height setting was actually perfectly designed to afford optimal keyboard and monitor placement while working in a seated position.

Even though the desk is designed for a corner space, the workspace is large enough to hold our 24″ Eizo monitor and all of the Oculus accessories with plenty of room to spare. If needed, we could definitely fit a second monitor as well.

The keyboard shelf is roomy enough for a full-sized PC keyboard and mouse. The mouse area is too small to place a regular mouse pad, but our basic Logitech mouse works fine on the shelf surface.

There is also a slot built into the front of the workspace for tablet or phone placement. I find this location for the slot a little odd though, and don’t use it to hold my tablet or phone.

At $349.99 I feel that the FlexiSpot M4B Corner Standing Desk is a great buy. The easy assembly, well-thought out design and sturdy construction makes it a standout among all of the current standing desk offerings. Although the manufacturer states that the desk is available in black or white, the only selectable item on both the Flexispot website and Amazon was black.

Specifications:
Product weight: 53 lbs.
Max. Loading Weight Limit: 33 lbs
Dimensions (Weighted Base): 23″(W) x 22.3″(D)
Dimensions (Flat): 5.9″(H) x 41″(W) x 23″(D)
Dimensions (Extended): 19.7″(H) x 41″(W) x 23″(D)
Extension Height: 19.7″ (Footprint Surface) & 14.2 ” (Keyboard Tray)
Work surface measures: 41″(W) x 31.5″(D) (Display Surface & Keyboard Tray)
Keyboard tray measures: 34″(W) x 11.8″(D) (Middle) & 7.9″ (D) (Both wings)

The sample for this review was provided by Flexispot. Please visit their website or Amazon to order.

 

Product Information

Price: $349.99
Manufacturer: FlexiSpot
Retailer: Amazon
Requirements:
  • • Existing standard desk
  • • Phillips screwdriver for assembly
Pros:
  • • Quick and easy setup
  • • Made to fit in corners
  • • Very simple to adjust
  • • Perfect height for sitting or standing
  • • Works with existing standard desk
Cons:
  • • No tilt adjustment
  • • Non-adjustable keyboard shelf
  • • Non-powered height adjustment

Filed in categories: Reviews

Tagged: ,

FlexiSpot M4B Corner Standing Desk review originally appeared on on March 26, 2017 at 8:39 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Headphones, video adapters, wallets, PAX East trip report and more – Weekly roundup

We published 25 posts this week including 11 reviews, 11 news posts, 2 articles, and several updates to some of our older reviews. Did you read all of them? Make sure you didn’t miss something by clicking through to see a list of all our news, reviews, and articles from the past week.

Reviews

Articles

News

Filed in categories: News

Tagged:

Headphones, video adapters, wallets, PAX East trip report and more – Weekly roundup originally appeared on on March 25, 2017 at 5:43 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

iClever BoostRun BTH07 Bluetooth Sport Headphones review

If you’ve been a patron of The Gadgeteer for some time, you may likely surmise that I’ve been on a quest to identify a pair of Bluetooth wireless headphones that will perform well for me in a variety of situations, but mainly for use during heavy exercise. After evaluating a variety of similar products, all of which basically fell out while working out, I realized that I hadn’t yet tried any of the style that “hook” over the ears, which I thought might be a helpful feature for someone with cavernous ear canals (like me). When I had the opportunity to evaluate a pair of iClever BoostRun BTH07 Bluetooth Sport Headphones, I thought they might fit the bill. Let’s see how they worked out. Gadget on!

Packaging

The BoostRun BTH07’s packaging was a simple cardboard box with the iClever logo in metallic red centered on the top of the lid.  If you’ve read my reviews, you know that my preference is that product packaging include some type of window or other transparent feature that allows the prospective buyer to see the actual product inside before purchasing it.  Of course, this is most useful for retail produce packaging, but not so useful for products that are only sold online, which I suspect the BTH07 might be.

I removed the lid and the BoostRun BTH07 headphones were presented neatly inside, encased within a white foam tray, as seen above.  The foam tray had cutouts to hold the headphones snug and to protect them during shipping and handling.  The foam tray pulled out easily and BTH07’s cord and other accessories (see below) were located below.

Contents

Inside the box were all of the items show above, which included:

  • BoostRun BTH07 Bluetooth Stereo Headset Sport Headphones
  • 3 pairs of silicon earbud tips in small, medium and large sizes (the medium size was attached to the headphones initally)
  • USB to micro USB charging cable
  • User Manual
  • Warranty Card

Specs

Below are some of the technical specifications of the BoostRun BTH07 headphones per the iClever site:

  • Model number: IC-BTH07
  • Bluetooth version: Bluetooth 4.1
  • Bluetooth profile: HFP, A2DP, HSP, AVRCP
  • Working time: up to 7 hours
  • Standby time: up to 160 hours
  • Charging time: about 2 hours
  • Weight: 19 g/0.67 oz
  • Waterproof rating: IPX4

Features, Functions and Performance

My initial impression of the BoostRun BTH07 headphones was that they seemed…well, a bit clunky.  But I was willing to give them the benefit of the doubt because I hadn’t yet tried any headphones with these over-the-ear hooks.  Plus I was immediately a fan of their black-and-neon green color scheme.

Like most earbuds today, the BoostRun BTH07 headphones feature silicone ear tips that fit into your ears canals. I planned to swap the medium-sized tips, which had been installed from the factory, with the large-sized tips, because I know from past experience that the medium-sized tips would fall out of my larger-than-average-sized ear canals immediately.  In fact, I tried the factory-installed mediums, and they did fall out, so on went the larges.

One of the main features of interest to me with the BoostRun BTH07 headphones was their over-the-ear “hooks” that were intended to help stabilize the headphones and help keep them on your ears during strenuous exercise.  More on these below.

In the photo above, you can see the + and – buttons that are located on the underside of the BoostRun BTH07’s right headphone.  These buttons are very tactile and produce a definitively “clicky” feel, but without being difficult to depress.  I found them very easy to operate once I memorized which was + and which was -.  These two buttons function as volume up/down (short press) as well as music forward/rewind (long press).  Also visible in the photo above is the tiny microphone hole used when making phone calls.

On the outside of the right headphone is also a single long, green button that is the Multi-Function Button (MFB), so named because it serves multiple purposes.  First, it is used to power on/off the headphones—depressing it for 2 seconds powers on the device and a British-accented, female voice prompt alerts you, “Power on.”  Initial pairing is then accomplished by going to your phone’s Bluetooth settings and selecting “IC-BTH07” from the list of devices.  The BTH07 then indicates “Device connected.”  It was just that simple, and the headphones paired automatically and immediately after powering them on every single time—I never once had to manually re-pair them.  A 2-second press of the MFB also powers the headphones off, with power-down confirmed by the voice prompt, “Power off.”  Additionally, the MFB pausing music, accepts or hangs up a phone call, and so forth, with all of its functions detailed in the included manual.

In the photo above, the BoostRun BTH07’s micro USB charging port cover can be seen on the rear of the left headphone.  This cover is made from a hard rubber material and fits very securely down into the charging port, but also includes a small protrusion that is easy to get a fingernail underneath to remove it, so that the charging cable can be inserted (see below).  Additionally, a tiny LED is located in the left headphone that indicates the device is charging when it is lit red and fully charged when lit blue.

Above, you can see that I’ve popped open the USB port cover.  I like the material that iClever used for this little cover.  It is flexible so it moves out of the way easily to access the USB port, but still fairly rigid, so there is less risk of it getting torn off like the USB port covers on many of the other devices I’ve tried.

Above, the included 20-inch long, micro-USB to USB charging cable has been plugged into the BoostRun BTH07 headphones for charging.  With the battery fully drained, the BTH07 headphones took between 1.5 and 2 hours to completely charge back up to full capacity and provided enough charge for about 4 to 6 workouts, or about 6-7 hours of life.  When the battery approaches the end of its charge, that familiar female voice prompt indicates, “Battery low,” so you know it is time to think about recharging the headphones.

The BoostRun BTH07 headphones feature a neon-green, 22-inch long, flat, ribbon-type cable that both virtually eliminates tangling and aids in visibility in case you lose it at the bottom of your gym bag or EDC pack (like I did a few times).

It also has a pre-installed cable connector that can be adjusted by sliding it up and down to tighten the slack in the cable.  The cable connector can be easily removed completely or reattached if desired.

One of the features that I really came to appreciate about the BTH07 headphones was that there is no in-line control unit as with several of the other Bluetooth headphones I have reviewed.  All of the controls are located in the right headphone, so the cable connecting the right and left sides is just that—a cable.  I’ve found that with the headphones I’ve tried in the past that included an in-line control unit, the headphone on the side with the control unit tends to fall out more often due to the weight of the control unit pulling on that side, especially while exercising.  The BTH07 does not have this issue.

Another feature of the BTH07 headphones that I came to appreciate was that its earpieces are actually angled 15 degrees from the main body of each headphone, which can be seen in the above image and is demonstrated in the image below.

Although I had initially thought that the BTH07 headphones looked bulky, the reality is that they really are not all that bulky when wearing them.  In the image above, you can see that, at least partially due to the 15-degree angled ear tips, they do hug the ear fairly well and don’t protrude excessively like I thought they would.

How did they sound?  They sounded good, especially with them pushed snugly into my ears, which reduced ambient sound and helped concentrate the sound from the headphones.  The overall dynamic range is decent, for music, which is what I often use the BTH07’s for, and I also used them while watching a movie or two, and they gave good sound for explosions and the like.

The BTH07 headphones felt comfortable to wear.  For the most part, they did stay on my ears even during exercise.  However, as with every other Bluetooth headset I’ve tried, eventually, as my sweat production increased along with my workout intensity, the left headphone actually fell off of my ear.  Even with the ear hooks.  I supposed that being a heavy sweater with large ear canals and doing loads of burpees and other similar movements was too much even for the BTH07 and its ear hooks.  However, for everyday, less strenuous use, and I would even say for most types of exercise, I think the BTH07 headphones perform quite well just fine.

iClever claims the BTH07 to be “Sweatproof Sport Headphones,” so I feel I should mention their moisture resistance. The iClever site claims an IPX4 rating, which generally means that they can be splashed fairly heavily with water and still remain undamaged.  The Amazon retail site claims an IPX5 rating, which means an even stronger resistance, so there is some discrepancy between these two reported ratings.  In any case, as mentioned above, I sweat quite heavily and work out quite strenuously, but never did this seem to affect the BTH07 headphones.  What’s more, one day I was caught out in a thundershower, a heavy downpour in fact, for about 20 minutes, and it didn’t even phase these headphones.  It was impressive.

Conclusion

Although my initial impression of the iClever BoostRun BTH07 Bluetooth Sport Headphones was that they looked a bit clunky, I was happy to find out that I was wrong.  Their 15-degree angled ear tips helped them feel comfortable on my ears, and their ear hooks did help keep them on my ears during exercise, although my combination of profuse sweat in my giant ear canals during strenuous exercise meant that they did fall off of me on occasion.  Functionally, they performed well.  Their sound is good and their combination of Multi-Function Button and + / – buttons are simple and easy to use.  Charging and usage time were very serviceable, but its water-resistance was downright impressive.  Especially for their cost, I would recommend giving the BTH07 headphones a look, and a listen.

Source: The sample for this review was provided by iClever. Please visit their site for more info or Amazon to order.

 

Product Information

Price: $21.99
Manufacturer: iClever
Retailer: Amazon
Requirements:
  • A device with Bluetooth connectivity
  • USB charging
Pros:
  • Hooks help it stay secure in the ear, even during strenuous exercise
  • No in-line control unit to throw it off balance
  • Impressive moisture resistant
  • Comfortable to wear
  • Affordable price
Cons:
  • Very secure, but still managed to fall out of my ear on occasion

Filed in categories: Audio, Video, TV, Reviews

Tagged:

iClever BoostRun BTH07 Bluetooth Sport Headphones review originally appeared on on March 25, 2017 at 8:31 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Noontec Hammo TV headphones and listening station review

There are times you want to watch TV, not the computer, and those in the general vicinity don’t really want to hear the sound. (This is known as an opportunity for innovation, or the start of an argument, depending on how it’s handled and the personalities involved.) Recently, I was offered the Noontec Hammo TV headphones and listening station, and hoped this would help in my situation. Let’s take a look. 

Note: Photos may be tapped or clicked for a larger image.


The Hammo TV comes with everything you’ll need to connect to most modern TV audio: the headset with charger, the base station (which includes a stand), cables to connect to miniAUX or RCA outputs, and a power cord for the base unit. There is also a clear installation diagram for those whose minds don’t run toward the technical.

Once set up, the unit can hide behind the TV or be visible – it’s not unattractive. My Lovely Bride suffers through a lot of tech lying about our home with few complaints, so I opted to hide as much as possible behind our TCL 40″ flat panel. Check the before and after pics below and see how well I did.


Once installed, you only have to connect the output to the Hammo’s input and watch as normal. I found it to be quite easy to use, even with the hassle of plugging and unplugging the jack. The base station has a bright green LED, which shows the connection. This blinks when you have turned off the wireless headset until you hold the power button down and turn the entire unit off.


The earcups are over-ear, so they are big enough to have decent sound and allow for long viewing/listening sessions. The sound quality is such that music, spoken words, and sound effects are all “present” in full stereo. It’s actually more engrossing than my TV speakers unless I have the volume up pretty loud.


If you’re someone who travels, this unit packs down to a fairly small size, and the headphones collapse like true travel headphones. Sitting in your TV area on the stand unfolded, they still don’t take up much room. But if you’d rather, you can store them in the (included) velveteen travel pouch.

One of the things I wasn’t happy about is that only a single person can use them at once – no shared listening while kids sleep, for instance. I’m sure this could be worked around, but it would be nice to see a company-initiated solution, like a wiring harness solution or similar. Also, there is no gauge for battery level on the headphones. I never had them run out in the middle of a show or anything, but there’s also no way to tell if I should charge them, or just hang them up after use.

I’ve found that having this setup gives us options to read and watch TV while in the same room and not disturbing each other. Sometimes the Lovely Bride wants to watch yet another British crime drama and I need to update an article or play World of Tanks, and yet we can sit together and snuggle, each in our own worlds. And that’s a great technical innovation!

Source: The sample for this review was provided by Noontec. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $119.95
Manufacturer: Noontec
Retailer: Amazon
Requirements:
  • Sound source with RCA or miniAUX output
Pros:
  • Private listening to TV
  • Wireless
  • Over-ear ear cups are comfortable for long wear
Cons:
  • Only a single person can use them at once – no shared listening while kids sleep
  • No gauge for battery on headphones.

Filed in categories: Audio, Video, TV, Reviews

Tagged:

Noontec Hammo TV headphones and listening station review originally appeared on on March 24, 2017 at 3:54 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Grovemade adds aluminum key ring to their lineup

Grovemade started out with bamboo and wood iPhone cases about seven years ago but since then, they have expanded their offerings to include new products like this new key ring made from a solid block of anodized aluminium.

Unlike some carabiners that can pinch your fingers, the Grovemade key ring features a unique loop design that allows you to easily hang it from a belt loop.

This US made lightweight but strong key ring also has a built-in bottle cap lifter so you can pop the top on a cold one.

The Grovemade aluminum key ring is priced at $29 and if aluminum isn’t your thing, you can also buy the key ring in steel, brass or titanium for $39, $59, and $79. The price for all of these key rings is pretty spendy, but if you like the design and style, head over to grovemade.com for more info.

Filed in categories: News, Pocket Gear

Tagged:

Grovemade adds aluminum key ring to their lineup originally appeared on on March 24, 2017 at 10:09 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.