IK Multimedia iRig Micro Amp review

REVIEW – iRig’s new Micro Amp looks to pack a lot of power into a small package without many sacrifices. Guitar amps can be very subjective. Can this one fit your sound and portability needs all in one small package? Read on…

What is it?

iRig’s Micro Amp is a 7.5-15w battery-powered guitar amplifier with and iOS/USB interface.

What’s in the box?

  • iRig Micro Amp
  • Lightning to Micro-USB cable
  • USB-A to Micro-USB cable
  • 6 AA batteries (not shown)
  • 3/8″-16 male to 5/8″-27 female mic stand thread adapter
  • Instruction and catalog pamphlets and a registration card

Hardware specs

  • Conversion: 24-bit A/D and D/A
  • Sampling Rate: 44.1, 48kHz, 88.2 and 96kHz rates
  • Operating Power: Battery-powered (6AA for ~ 15 hours use) or DC in 9V-15V (-)+
  • Device Connection: Micro-USB
  • Inputs: 1/4″ instrument and 1/8″ auxiliary
  • Outputs: 1/8″ headphone and 1/4″ speaker output (4-16 Ohm cabinet out connects to larger speakers)
  • Output Power: 15w (7.5w when powered by batteries)
  • Dimension/Weight: 210 x 155 x 125mm / 1.26kg
  • Speaker Size: 1×4″ full range
  • Channels: Clean, Drive and Lead with low, mid and high EQ and gain controls
  • Connectivity: Connects to iPhone, iPad and Mac/PC with all cables included, no adapters needed
  • Included Software: Amplitube for powerful tone and features

Design and features

Out of the gate, the Micro Amp looks like a miniature amp which feels familiar and makes it super easy to jump in and use immediately. The entire thing is only slightly thicker than an old school lunchbox and is just over 3lbs with batteries installed, so really easy to throw in a backpack to take with you. The construction is rugged plastic with heavy-duty bumpers to protect against drops. All of the controls are recessed so they won’t get knocked in a tumble either.

The back of the unit is where you’ll find the battery compartment (iRig has included the 6AAs for you) as well as a DC in port and a 1/4″ output for connecting another cabinet… wait… What?! You read that correctly, you can connect this little guy to a larger speaker cabinet. Crazy cool.

On the bottom is serial and certification info as well as a threaded receiver for attaching the amp to a stand.

They also included an adapter for use with the larger mic stand threads.

On the top panel are your main controls. Power button, 1/4″ instrument input, 1/8″ aux input, 1/8″ headphone out and Micro USB port for connecting your phone or Mac/PC. The Bass, Mid, Treble knobs are flanked by Gain on the left and Volume on the right. Your channel controls are front and center; Clean, Drive and Lead, each light with their own color when active for clear communication to the player in darker environments.

Setup

If you’ve used any kind of battery powered guitar amp before then you’ll have no issues here. Pop open the back and install the 6AAs iRig included (maybe switch to some rechargeable AAs after that), plug in your guitar, turn it on and start exploring.

If you want to connect it to a bigger cabinet, you’ll need a 1/4″ cable to connect the two and a power supply for the Micro Amp. iRig doesn’t include one in the box, but almost any standard stomp-box power adapter will work (just make sure it’s negative center on the barrel).

You’ll want to use one of the two included cables to connect the amp to your iOS device or a Mac/PC to use IK’s apps.

Performance

The Micro Amp is super convenient, really easy and fun to use. On battery power alone, the volume gets loud enough that halfway up is more than good for bedroom practice. On the clean channel, the sound is indeed clean and smooth. Drive and Lead increase the fuzz and the presence respectively. On first listen, this does not sound like a microamp. It’s got presence, there’s no hum in the background and lets you focus on your guitar. Easily bests the Yamaha THR5 at half the cost if you like clean sounds without a lot of overdrive.

Both my son and are able to pick up and carry the amp with a single hand, but it does feel like it’s missing a dedicated handle. Anyone with smaller hands or just carrying multiple things might have trouble. Similarly, the mic adapter should have a home in the battery compartment or somewhere so it doesn’t get lost.

So what if you’re not into clean guitar and want crunch, or blistering metal or want to find a sound all your own? Any sounds that you may feel are missing are likely available by connecting your phone or computer and downloading the Amplitube app. It’s funny, but downloading the app I realized that it’s been around a while. I actually originally installed it on an iPad back in November of 2012 and it’s improved a lot since then.

26 of 32 of their own effects pedals are included with the app as you fill out a virtual pedal board. You can choose from pedals like delays, Chorus, Wah, Flangers, Overdrive and more as well as different head units that are sure to have what you’re looking for.

Connecting to Amplitube does override your channel settings so everything other than the physical knobs is now controlled by the app.

An additional 6 of their premium pedals and lots of effects pedals from brands like Fender, Orange and others are available to purchase as are amps and mics. The in-app purchasing feels a little bit like death by 1,000 paper cuts, but it is significantly cheaper than buying physical pedals outright by a long shot. Tip: look at the different bundles as they may save you some money over individual purchases.

Considering that Amplitube lets you add drum tracks, vocals, amps and then record your session, there’s a lot to like. For a new guitarist, there’s a lot of value and just as much for someone wanting to experiment with different pedals before buying real ones.

As I’m typing, Satchel is lost in a riff playing with the Octave pedal bouncing between something he’s laying down on the spot and the Mario underground theme song. Pretty sure he’d sit there for the full estimated 16 hour battery life if we left him alone.

Here’s a quick vid of the riff he shot with my iPhone.

View this post on Instagram

octaves dogtaves

A post shared by Satchel Birch (@satchriffs) on

Maybe the coolest feature for me is that you can connect an external cabinet with its 1/4″ output connection. We have a 4×12 Marshall cabinet without a head unit that’s been collecting dust for a while. The Micro Amp plugged right in and was able to drive this 16 Ohm cabinet well enough that we were both smiling and nodding our heads. It’s worth noting that the output doubles from 7.5w to 15w when you use the DC port on the back of the Micro Amp instead of batteries. It’s not going to out-power a real system, but our cabinet will now see some use.

What I like

  • Size and weight is awesome
  • Sound is great with good controls
  • Amplitube app is fantastic sound exploration, and practice sessions in a box
  • Able to output and drive an external cabinet

What needs to be improved

  • It could use a handle or strap
  • Storage spot for mic adapter

Final thoughts

There’s not much to complain about here and the value outshines all of it. Satch is heading off to college this fall and this is the perfect size for the dorm room without sacrificing sound. It’s got me itching to pick up the guitar again myself.

Price: $149.00
Where to buy: IK Multimedia and Amazon
Source: The sample of this product was provided by IK Multimedia.

Filed in categories: Reviews

Tagged: ,

IK Multimedia iRig Micro Amp review originally appeared on The Gadgeteer on May 10, 2019 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

JackyLed Tower Power Strip review

REVIEW – As the number of devices that need to be charged and then recharged grows, so does the number of power strips I have lying around my house. Most of these power strips are just that: strips. The JACKYLED vertical power stip mixes things up by changing the form factor from a strip to a tower.

What is it?

The JACKYLED vertical power tower is a rectangular power strip. It has a total of 10 outlets with three on the left and right side and on the back of the unit. It has a single outlet on the front with four USB charging ports along with a non-detachable 6.5-foot power cable. The outlets are spaced far apart such that most non-standard sized plugs can be used next to each other without being blocked.

 

What’s in the box?

  • JACKYLED Vertical Tower Power Strip
  • A tiny sheet of instructions

Hardware specs

  • 5.6 inches deep by 3.7 inches wide by 8.7inches tall
  • 10 outlets
  • 4,  3.0A USB ports
  • 1080J of overload protection
  • 6.56 foot 14 gauge non-detachable power cable
  • Case made of fire retardant PVC material

Design and features

The JACKYLED power strip is more at home on your desk then on the floor behind it. It’s rectangular shape houses 10 outlets that I’ve not been able to block no matter how oddly shaped the power adapter I’ve plugged into it. The top of the unit has two power buttons. These allow you to turn off power to either of the side outlets. The is a useful feature when you want to leave items plugged in but don’t want to trickle charge things such as monitors and printers.

There are three outlets on the left that are mirrored on the right side. The back has three more. The front only has one outlet and four USB charging ports. The power cord is nicely built and has strain relief both at the box and the plug. The plug itself is somewhat ordinary and inserts straight into the wall. I’d prefer one that comes out of the wall at 45 degrees or drops down, but this one gets the job done.

I set the JACKYLED up behind my monitor on my desk. I transferred everything I’d plugged into two strips on the floor to it. While it started to look a little octopus-like, with cords jutting out from all sides, it allowed me to get rid of two strips and clean up the floor around my desk. Additionally, the fact that it was on my desk allowed me to unplug things without having to lie down on the floor.

What I like

  • A form factor that allows all outlet to be used without blocking adjacent outlets
  • On/Off switches for alternate side outlets
  • 10 outlets mean you can plug in a whole bunch of stuff.

What needs to be improved

  • It’s rather light, so when you have a lot of things plugged in, it tends to shift around a bit.

Final thoughts

the JACKYLED Tower Power Strip is a great unit with loads of outlets and tons of space to use them. The addition of 4 USB charging ports on the front and the ability to turn on and off power to the outlets only increases its value. The only negative thing I can offer is that it is a bit light and can be pulled around a bit if you plug in devices with a bit of heft behind them.

Price: $38.99
Where to buy: Amazon or ARACKY
Source: The sample of this product was provided by Amazon

Filed in categories: Reviews

Tagged:

JackyLed Tower Power Strip review originally appeared on The Gadgeteer on May 10, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Trustech Fan review


REVIEW – I live in NYC, and with the spring season beginning to emerge from the dark and cold winter, I am looking to replace my old and broken floor standing fan with a new fan that will provide effective and efficient cooling for that period of time before the air conditioner is a must. I recently got my hands on the Trustech Oscillating Tower Fan. Here is a summary of my experience with it.

What is it?

The Trustech fan is an oscillating tower pedestal Remote Control fan that is bladeless and quiet.

What’s in the box


1 x Trustech Fan (In 3 parts that require simple assembly)
1 x Remote Control
1 x User Guide

Design and features

Features

  • Air Multiplier Technology
  • Ultra Quiet
  • Custom Cooling Time with Timer
  • Remote Control
  • 70 Degree Oscillating
  • Bladeless

The Trustech Fan is a 3.6-foot standing fan. It arrives in 3 main pieces that are the base, the bottom portion that houses the electronics and the top portion that houses the output design including the fins.


On the front of the fan, there are manual button controls that include, the swing on/off, the timer settings, the mode the speed and the power on/off.

Above the control buttons, there are the LED indicators for the swing on/off, the timer setting, the air flow mode, and the air volume setting. The LEDs that are next to the labeled indicators light blue when selected.

Performance

The fan arrives as 3 main parts in the box. Assembly is very simple. The bottom portion of the fan has a threaded base that fits into the fan base and can only fit one way. There is a plastic nut that then screws on to the threaded base to connect the two. The fan base has notches to neatly pass the power cable through. The top portion of the fan simply clicks into place on the bottom portion. The fan is made mostly of plastic but does not feel poorly made or really cheap. Once standing, the fan is also quite steady on its base. The remote control is small but functional. All that is left to do is to plug the fan into an AC power outlet and turn it on.

All of the functions are simple and work as expected including the timer functions, the swing mode, and the airflow modes. However, no matter what airflow mode you choose, the airflow pressure of this fan leaves much to be desired, and you can only get a proper cooling effect if you are quite close to the front of it.

What I like

  • The sleek design
  • The Oscillating capability
  • The sleep timer

What can be improved

  • The volume of air that it produces
  • A dimmer option for the bright LEDs that are on the front

Final thoughts

To be totally honest, this fan has been very disappointing for me. When I first received it I was quite pleased about the design, the features and the simplicity of the assembly. However, the most important task it is designed to perform is to blow an adequate volume of air to provide cooling. This fan cannot cool anything more than a tiny room. If you stand more than 5 feet in front of it, the effect is minimal at best. For my use, this inability is a deal breaker and even more so considering the price. Great design but a failing grade for performance.

Price: $122.99
Where to buy: Amazon
Sample: The sample for this review was provided by Trustech.

Filed in categories: Reviews

Tagged:

Trustech Fan review originally appeared on The Gadgeteer on May 9, 2019 at 10:03 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Lockly Secure Pro Deadbolt Edition smart lock review

REVIEW – I love smart home gadgets. But I have yet to review any type of smart lock. That is up until now. Today I’ll be reviewing the Lockly Secure Pro Deadbolt Edition. This lock is loaded with a lot of unique security features, including a secure digital keypad and  3D fingerprint sensor.  Let’s take a look at the Lockly Secure Pro.

What is it?

The Lockly Secure Pro Deadbolt Edition smart lock is a smart lock that features a digital touch screen keypad, a 3D fingerprint sensor and compatibility with Alexa and Google Assistant.

What’s in the box?

  • Secure Pro smart lock
  • Bolt assembly
  • Screws
  • Strike plate
  • Strike plate housing
  • Backplate
  • 2 x physical keys
  • 4 x AA alkaline batteries
  • Secure Link – Wi-Fi hub
  • Secure Link – Power adaptor
  • Secure Link – Door sensor
  • Quick start guide
  • Installation manual
  • User manual

Design and features

The Lockly Secure Pro has a modern, clean design. The lock is available in two colors, Satin Nickel and Venetian Bronze. I chose to go with the Satin Nickel because it was a close match to my door’s existing hardware.

The front of the outer assembly features a digital keypad and keyhole w/keyhole cover. The fingerprint sensor is located on the right side of the assembly. On the bottom, there’s a reboot button and a 9V battery emergency charging socket.

The inside assembly has the Battery Compartment (Operated by 4 x AA Batteries), Battery Cover, Display Keypad on/off Switch (switches off and locks the keypad), and Thumb-turn. Inside the battery compartment, there’s a reset button, Program Button and Beep Alert.

With Secure Pro, you can choose from five unique methods of entry, which include: the PIN Genie keypad, 3D fingerprint sensor, Lockly app, virtual assistant and traditional key.

The PIN Genie keypad allows you to unlock the door using a 6-8 digit access code.

Lockly’s patented PIN Genie Technology makes it virtually impossible for someone to use your access code unwillingly. The video below explains Lockly’s PIN Genie Algorithm and how it works.

The Lockly keypad has 3 different modes Standard, PIN Genie mode, and Random mode. The video below explains how each mode works.

The Secure Pro comes equipped with a capacitive fingerprint reader. Secure Pro uses capacitors and electrical current to form an image of the fingerprint, meaning only physical fingers will be accepted, preventing the use of lifted prints.

With the Lockly app, you can monitor and control your lock using either Bluetooth or Wi-Fi.

Using Wi-Fi requires the use of the included Secure Link WiFi Hub. The hub allows you to lock, unlock, and monitor your smart lock remotely wherever you have a Wi-Fi connection. Setting up the Hub is easy using the Lockly app.

The Hub comes with a door sensor.

The sensor provides the ability to verify that your door is securely closed and not ajar and also send push notifications to your phone on the status of your door when someone opens and closes the door.

Installation

Installing the lock is pretty easy, especially if you’re replacing an existing deadbolt. If you’re not Lockly provides templates to help you out.

The only tools you’ll need are a Phillips head screwdriver and a little patience.

The installation instructions are easy to follow and very detailed. Take it from someone that usually doesn’t bother reading instruction, read these carefully before you get started.

Setup

The lock can be set up with or without the Lockly app, but using the app is recommended and much easier.

After downloading and launching the app choose Setup a New Device from the slide over menu and follow the instructions.

The Lockly app not only allows you to monitor and control your lock, but it also gives you access to the locks key functions.

You can check the access log, grant, monitor, and revoke user access. Issue temporary eKeys, one-time use codes, and set custom durations.

One of the codes you can issue is the Offline Access Code. This unique code allows you to grant access to guests remotely without guests needing to download the app.

The app is also where you can add and manage Fingerprints. To add a Fingerprint your phone must be connected to the lock via Bluetooth. Select Add a New Fingerprint and watch the brief video. The Secure Pro can store up to 99 different fingerprints.

In the app’s Settings, you can change your Access code and enable the Auto-Lock Timer. With Auto Lock enabled, Lockly will automatically auto-lock the door based on your customized timing set between 5 seconds and 5 minutes.

Using Lockly couldn’t be easier. When leaving the house, all I have to do to lock the door is slide my hand across the keypad.

Unlocking the door is just as easy using my access code, the fingerprint sensor, or the Lockly app on my phone.

The Secure Pro also comes Alexa and Google Assistant enabled.

I love this feature. I have a bad habit of not locking my door at night and asking Alexa if the door is locked beats getting out of bed and trudging to the front door to check. And if I do forget to lock it, I can just tell Alexa to lock it for me.

In order to use Alexa, you’ll need to enable the “Lockly” skill in the Amazon Alexa app.

What I like

  • Easy to install
  • Five different ways to unlock
  • PIN Genie digital keypad
  • 3D fingerprint sensor
  • Easy to share secure access codes
  • Alexa compatibility  
  • Long battery life
  • Bluetooth and WiFi connectivity

What needs to be improved

  • Nothing

Final thoughts

I like everything about the Lockly Secure Pro Deadbolt Edition smart lock. From being able to monitor and control my door through my phone. To easy and secure access via the secure digital keypad or fingerprint sensor. And the added bonus of easily being able to share access codes with family and friends. This is my first smart lock, and after using it over the past couple of weeks, I’m convinced it’s the last one that I’ll ever need.

Price: $299
Where to buy: Lockly and Amazon
Source: The sample of this product was provided by Lockly.

Filed in categories: Reviews

Tagged: ,

Lockly Secure Pro Deadbolt Edition smart lock review originally appeared on The Gadgeteer on May 9, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Polar Vantage V Pro multisports watch review

REVIEW – I love receiving new fitness gear to review…nine times out of ten, it amps up my desire to get/be/stay in-shape, workout, pound pavement, etc. As the years roll by, it gets increasingly difficult to be epic but I am a firm believer in that you get what you sow. Today’s tech-world gives us countless gadgets, websites, apps, and support systems to exercise more efficiently and effectively. Hopefully motivating and empowering each of us to reach our goals from wanting our pants to fit to gaining a six-pack. In this case, Polar has sent me their latest and greatest professional multisports training watch: the Vantage V to checkout for this review.

This review will be coming from the perspective of a fifty-something who isn’t nearly as energetic as they use to be back in the day. I will never run a marathon or do a triathlon but do try to workout daily, including running, walking, stairs, elliptical, weights, tennis, etc. For me the key is the long-game, to enjoy exercise but not to the point of injury. Typically I wear a mechanical watch throughout my day and swap it out for a fitness device when I workout, usually an Apple Watch for music and pace/duration. But for the next month or so, I’ll be focusing on the Vantage.

What is it?

The Vantage V is Polar’s flagship multisports training watch engineered to help top-level triathletes, marathoners, hardcore runners, etc. improve their performance and achieve their goals. The Vantage V is Polar’s replacement for the V800. In addition to upgrading the technologies within, Polar has change the overall aesthetics of the watch, going from a rectangular, utilitarian design to a the more classic round form factor.

What’s in the box?

  • Polar Vantage V pro multisport watch
  • Charging cable
  • Polar Vantage V user manual
  • Information note

Specifications:

  • Measurements: 46 x 46 x 13 mm
  • Weight: 68 g
  • Display: Always on color touch display with Gorilla Glass. Size 1.2”, resolution 240 x 240.
  • Battery: 320 mAh Li-pol battery. Battery life up to 40 h in training mode (GPS and wrist-based heart rate).
  • GPS & Barometer: Integrated GPS & GLONASS. Assisted GPS for fast fix times. Barometric altitude, incline, ascent and descent.
  • Connectivity: Bluetooth Low Energy. Custom USB cable for charging and data synchronization.
  • Watch: Time & date. Alarm with snooze.
  • UI languages: English, German, French, Italian, Dutch, Norwegian, Spanish, Portuguese, Swedish, Finnish, Danish, Polish, Russian, Turkish, Indonesian, Czech 
  • Sensors: Compatible with Polar BLE heart rate sensors.
  • Water resistance: Waterproof (WR30)
  • Wristbands: Durable and comfortable silicone.
  • Sizing:

    • Small: wrist circumference 130-185 mm
    • Med/Large: wrist circumference 155-210 mm

Design and features

As I said, the Vantage V is Polar’s flagship, GPS enabled sports watch engineered to track nearly any and all sport and fitness activities: running, swimming, cycling, elliptical, yoga, martial arts, tennis…to name a few. Like a majority of past and present Polar products, their latest & greatest can also track your daily activities including heart rate, steps taken, and calories burned.  But like it’s predecessor, using the Vantage “as a fitness band would be like taking a Ferrari to the grocery store to buy milk”. It works and you’ll look getting there but there are certainly lower priced, just as effective alternatives 😉 .

The Vantage V is definitely a well-made device, constructed from aircraft aluminum, gorilla glass, and solid yet comfortable rubber. These premium materials combine to give this multi-sport watch a quality look and feel. The 1.2 inch 240×240 color touchscreen is protected by gorilla glass and is surrounded by the aluminum case that flow nicely into its rubber back.

Fit and comfort

As with a majority of fitness watches, the Vantage V comes on rubber strap.

The rubber is soft, flexible, and overall the band is very comfortable to wear. The strap has a knurled texture to it with a standard buckle and locking, logoed free loop to keep the end of the strap in place.

For being a 46mm watch that sits 13mm high, the Vantage V doesn’t wear too big or heavy on the wrist. Here you can see it in comparison to the Suunto Elementum Terra and larger of the two Apple watches. The Vantage wears very nicely on my 7 inch wrist and compared to a stainless steel watch, it’s so light I barely know I have it on.

Setup and Configuration

The first step I did in the setup process was to charge the Vantage using its proprietary charging pad.

There are four metal plates on the back of this fitness watch engineered to make contact with the corresponding pins on the charging pad. This is definitely a bit old school when many of the big players in smartwatches use inductive charging that can be done on any wireless charging pad.

The watch has to sit in a specific orientation to charge. There is a red tab on both the Vantage and charger that align.

The watch and pad are held together magnetically.

As the watch was charging, I (re)downloaded the Polar Flow app onto my iPhone and logged into my account I setup for previous reviews. All of my preferences were still there, so other than confirming all my info hadn’t changed…getting everything dialed in was quick and easy. That said, 99% of configuring the watch happens either in the app or on the Polar Flow web-interface (I recommend the website. I found it easier).

Setting up your Polar world can be anywhere from a relative short effort to a long and detailed one. The Polar Flow app/website enables you to tweak many facets of that ecosystem, down to how your watch face presents your data and what sensors are being used/enabled during each specific activity.

Once you have your activities arranged and personalized as you want them, you simply sync your watch and smartphone or computer. For you newbies to Polar, I can almost guarantee you that you’ll continue to tweak your profile and watch configurations as you become more accustomed to how you use your multisport watch and what data/stats are important to you as you workout. The more time, effort, and thought you put into this, the more you ultimately get out of using the Polar experience.

Operations

The Vantage V can be controlled by it 1.2 inch touchscreen or 5 physical buttons along the sides of the case. The Vantage products have an MIP display (memory in pixel) with a resolution of 240×240. When I reached out to Polar regarding the Vantage’s screen this was their response:

We decided to go with the MIP display instead of OLED, because an OLED display consumes a lot of power and is not very readable in bright sunlight. We figured extended battery life and the ability to see the display continuously when training (during indoor and outdoor sessions) are important for athletes.

After using various Apple, Samsung, Android Wear watches (not to mention smartphones) over the years, I’ve become relatively accustom to OLED displays and how much they pop especially in low light. But I 100% agree with Polar on this one, I’d rather not have to charge my watch every night and be able to see my time on a bright summer run.

Like its casing, the Vantage V buttons are constructed of aluminum with a ridged pattern machined into their surface. The buttons are easy to find and use while working out. The left side has the LIGHT and BACK (pauses/ends the workout) buttons.

The right side has the page UP and page DOWN buttons for navigating thru the user interface and the red START/SELECT button is for beginning activities, laps and selecting/confirming objects in the various menus.

The six main screens all display time, day, and date. The other information you can have at the glance at your wrist is: percentage of your daily activity goal, heart rate, training arch, nag reminding how long it’s been since you last worked out, and sleep data.

In a recent firmware update, Polar has enable smartphone notifications which works very well across the board from my emails and messages to when my security cameras detect movement.

Performance

The Vantage V works as you would expect in today’s high tech world. The Polar OS, while be it a bit old school, is zippy enough, lag-free, and gets the job done. I’d call it direct, usable, and to the point.

The Vantage series has Polar’s new Precision Prime fusion heart rate sensor engineered into back of the watch.  The sensor array has 9 LED that accurately monitors your heart rate during your workout or 24/7 throughout your day. I tested the Vantage’s accuracy against my Apple Watch and elliptical’s handle grip sensors and on average all correlated nicely though there was a bit more variability in the wrist sensors when compared to the fixed grips.

The Vantage V can also calculate Running Power using the heart rate monitor, GPS and barometer data from the wrist – no additional foot pods or sensors needed. This calculation is done with Polar’s proprietary algorithm and it helps you monitor the external load of your running (aka during intervals, hills, or to maintain a constant effort level during a race). The Vantage V can also use Running Power to calculate your Muscle Load, the load that your training session puts on your joints and your muscular and skeletal systems.

GPS distance and pace both seemed relatively accurate from my initial survey standpoint. I ran or walked several known routes and the distances & times were within a few percentage points of what I believe it should have been.  I hope to review this and a few other features more in-depth this summer as I workout more out side.

Polar’s Sleep Plus feature automatically detects the timing, amount, and quality of your sleep in hopes of better rest to ultimately improve your recovery and performance. Or in my case, Sleep Plus let’s me know when my wife’s snoring interrupts my sleep.

Battery life is incredible… Compared to my Apple, Samsung, or Wear OS smartwatches I have used thus far, the Vantage lasts many times longer than the any of the competition. In addition to using the GPS during my outdoor workouts, I had the watch continuously monitoring my heart rate 24/7 and my sleep quality at night and it still latest nearly a week before needing to be recharged.

To conserve power, the Vantage V doesn’t automatically sync with your smartphone, 99% of the time I had to force the issue by long pressing the lower left button on the watch.

Ecosystem

If I had to select the best part of the Polar experience, it would be the Polar Flow ecosystem it creates for its users. I grant you a system is only as good as the data being fed into it. But Polar engineers work diligently to not only provide you a worthy training companion but a place to nerd out over the data it collects.

The Polar Flow app/website enables you to dive very deep into the details of your training and performance metrics.

The Vantage V wirelessly syncs data from the watch to your mobile device which then updates your flow account with your most recent efforts. Without the app, data syncing must be done by plugging the watch into your computer via the charging cable.

Is It a Smartwatch…

That is a question I have been asked about this watch more than once during this review…and my answer is sort of. It doesn’t do apps or pay for stuff or even play music while you run. But like I mentioned above, it does give notifications, provides pace/distance/HR/etc on the fly, and does a great job gathering fitness and physical performance data then transferring it back to the mothership (aka Polar Flow) for further, more detailed analysis. As a modern day digital watch goes, the Vantage V is smart enough and does everything that I need, less music while pounding pavement. That said, I believe Polar will ultimately have to get on the bandwagon like others and produce less niche devices and cater a bit more to the mainstream. Cause lets face it, Apple is kicking @$$ and taking names. But that is just my 2 cents…

What I like

  • Well made hardware
  • Comfortable, light-weight form factor
  • Very sport-/training centric design
  • Polished, integrated fitness ecosystem
  • Smartwatch functionality has been added thru firmware updates
  • Collects huge quantity of data and presents it in a well thought out Polar Flow interface
  • Excellent battery life

What needs to be improved

  • Expensive
  • Can’t stream music
  • Isn’t a true “smartwatch”

Bottom Line

For this review, I wore the Vantage V nonstop for nearly two weeks then on and off when I exercised for approximately a month. I hate to say it but the Polar Vantage V is out of my league…that is the cold hard truth of it. For how I use a fitness smartwatch, this bad-boy is definitely overkill. It has been fun to try out but the realist in me knows I’ll never truly use many of the features of the Vantage or Polar Flow ecosystem. I’m definitely more of an Apple Watch, Samsung, or Wear OS kind of athlete. I like my motivational tunes streaming thru my earbuds and I would trade that over the differential the Vantage V gives you over the more mainstream fitness/smartwatches.

Final thoughts

The Vantage V and the Polar ecosystem that support it are an extremely powerful training tools that really anyone could use to improve their personal best in whatever sport or exercise regime they live in. That said, this flagship fitness and training watch is tailored more for the true athlete wanting to optimize their performance at the very far end of the curve. Though Polar, via firmware updates, has and continues to add smartwatch functionality to both variations of the Vantage. The Vantage V is impressive, with really have zero complaints other than no wireless music capabilities but that is a known quantity going into it.

As I said, I’ll continue to use the Vantage V this summer and will hopefully have a follow on review that discusses its accuracy and niche capabilities this Fall.

Price: $499.95
Where to buy: The Vantage V is available directly from Polar and Amazon
Source: The sample of this product was provided by Polar.

Filed in categories: Reviews

Tagged: ,

Polar Vantage V Pro multisports watch review originally appeared on The Gadgeteer on May 8, 2019 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.