The Twelve South SurfacePad is a leather jacket for your iPhone

The SurfacePad for iPhone is a thin, minimal leather cover for your iPhone 7/8, iPhone 7/8 Plus, or iPhone X.  It protects the front and back of your phone from pocket hazards and from getting surface scratches from tables and countertops.  The SurfacePad also serves as a stand to support your iPhone in the horizontal orientation for hands-free use.  It has two slots inside for carrying your most essential cards, and the leather back is compatible with Qi wireless charging.   And for the iPhone X, the case triggers the phone’s wake/sleep functions.

The SurfacePad is made of full-grain leather, and it attaches to your phone with an adhesive pad on the back of the phone.  You apply the back of the case like applying a screen protector.  The SurfaceGrip technology allows you to remove and replace the case many times without leaving behind a residue, so you can replace the SurfacePad with a protective case for your more active days.

The SurfacePad is available in several leather colors.  Black is available for all iPhones; tan is also available for the iPhone 7/8 and iPhone 7/8 Plus; navy is the third color for the Plus models, and brown and green are available for the iPhone X.  Cases are $39.99 for the iPhone 7/8 and $49.99 for all other models.  Learn more and purchase the SurfacePad at Twelve South.

 

SnapPower has a new easy to install USB wall outlet cover charger

When it comes to easy installs, SnapPower is the master. Remember their GuideLights outlet cover night light that I reviewed in 2014 and their SwitchLight switch plate night light which I reviewed last summer? Well, now they are back with an updated version of their SnapPower USB charger switch plate. The USB Charger 2 has been slimmed down,  doubled the USB ports to 2, and it now has 2.1 amps of power to charge your phones and tablets.

You’ve no doubt seen switch plate covers with built-in USB ports before, but SnapPower’s products require no special electrical skills or tools to install. All you have to do is use a screwdriver to remove your existing switch plate and then replace it with the SnapPower Charger 2 plate. That’s it. The USB Charger 2 retails from $19 to $23 depending on the quantity purchased. For more details and to order, head over to snappower.com

MWAY HD 1200P WiFi endoscope camera review

We Gadgeteers not only love things that do little tasks well, and clever designs, but we also like to see the inside story on how these devices work. Sometimes this means taking them apart, but sometimes, it can just mean finding a way to observe the item in action. Sometimes, you need to see into or under something in order to troubleshoot or just observe a running process. If the desired objective is under something, behind a blockage, or deep inside a larger enclosure, this is quite difficult, unless you have an endoscope. I’ve wanted to have something like this all my life, and M-way finally offered The Gadgeteer crew a test model YPC110 for review.

Note: Photos may be tapped or clicked for a larger image.

What is it?

The YPC110 (such catchy names makers use, sometimes!) is a 1600 x 1200 resolution CMOS sensor on a long semi-rigid 8 mm diameter cable. The model I was sent is 3.5 meters long, but they have 2-meter, 5-meter, and 10-meter lengths as well. The CMOS camera is powered by a 4” long .75” square tube that houses a battery and WiFi radio.

Two USB jacks are on one end. The microUSB is for charging the internal battery, and the standard USB-A port is where the camera connects.

Specs

(From website)

  • Imaging Sensor: CMOS
  • Camera resolution: 1600*1200
  • Horizontal view angle: 72 degrees
  • Transmitting frequency: 2412-2612 MHZ
  • Minimum illumination : 0 Lux
  • Power Supply: 3.7V 600mah lithium battery
  • Unobstructed effective range: 5-10 m
  • Waterproofing grade: IP68 ( for lens/ tube only )
  • Diameter of flexible tube: 8.0mm
  • Charging voltage and current : 5V – 2A/1A/500mA
  • Focal Distance : 1.2 Inch – 3.2 Inch
  • Full Charging time: 1 hour
  • Length : 16.4ft /5M

What’s in the box?

  • A semi-rigid zippered carrying case. (6.5” x 5” x 2.5”)
  • The sensor/cable itself
  • The WiFi radio/battery “head” unit
  • A USB-A to microUSB charging cable
  • Mirror attachment (for seeing into tight turns where the camera cannot get into)
  • Hook tip
  • Magnetic probe
  • Instruction leaflet

Design and features

The unit is made up of two main parts: the wifi broadcasting/power module, and the camera with the stiff connecting cable. There are 6 pinhole LEDs around the end of the CMOS to light up the field in front of it. The field of focus is fairly short (a few inches) and fully automatic. You focus moving closer or further away. The app has a bit of autofocus, as well. To use, go to the App Store for your smart device, and download the HD SEE app. Once the battery is charged on the camera module, turn on the WiFi radio. Go to your smart device’s WiFi settings and connect to the YPC’s WiFi. (The WiFi and password are listed on the head unit’s endcap.) Once it’s connected, go into the HD SEE program, and you’ll see the image from the camera. You will find controls for video recording, still image capture, and settings. There’s also a button (looks like two mountains, or upside down ice cream cones) that takes you to your photo and video library, but these are also accessible in your device’s default storage app.

Here’s what the photo gallery shows:

And here’s the video gallery:

As you can see from the above three screenshots, the app is not well-labeled or designed for high-resolution. These were taken on an iPhone 8 Plus.

The camera is easy to setup and use, but a bit difficult to control. I found that the shorter length you were pushing ahead of your hand, the more control you had. Once you feed it into a tight space, of course, this advantage is gone, but if you’re in a narrow passage, there’s not going to be much boinging around anyway. At the far end of the cable from the sensor is a wheel that adjusts the amount of light the tiny LEDs around the tip produce. (You can see it on the left in the photo below. You can see the reflection the LEDs make on the table in front of the camera.) This can make a huge difference not only in your photos and videos but in how well you can actually see details live.

 

For fun, I explored some hidden places in my kitchen and den. Like my wife’s coffee mug sitting on the counter:

And the crevice behind the canisters on the kitchen counter:

And under the gas logs in the fireplace. (This could actually be a productive use of this tool!)

While the camera behaved exactly as advertised, there were some things that I found myself wishing for. First, why WiFi? I have never attached to a data source (CD, DVD, Scanner, Camera, etc.) over WiFi and was not impressed. Bluetooth would have been much better, both for stability and for battery life. Let me explain. Since you’re probably somewhere that has a WiFi network and are connected to the internet, you’ll need to pause or maybe even delete the existing network connection in order to use the ‘scope. I found that if I didn’t, as soon as I powered off the MWay, the regular network would be accessed, and would never let the iPhone back on the MWay network without going back into Settings. This wouldn’t happen with BlueTooth. Smart devices are designed to have many concurrent Bluetooth connections and only a single WiFi connection.

The second issue is battery life. I could get maybe 20 minutes of active viewing and recording on a single charge. I tried to charge while connected, but this would play havoc with the network setup again, and also, the two outlets are so close as to prevent any but the narrowest connectors to fit simultaneously.

I suppose if you can find drivers, you could just plug the camera directly into the USB port on your computer and run an image capture utility to capture video or stills. I tried that on my Mac, but neither the WiFi nor the direct connection allowed me to use the attached camera. (I guess they feel when you have a really good camera attached, so why connect to a different one?)

What I Like

  • The unit is quite small
  • Works as advertised
  • No extras needed – complete kit shipped together

What needs to be improved

  • Image quality is low
  • WiFi connection is flaky
  • Battery life is short
  • Can not use while charging battery

Final thoughts

Seeing into hidden areas is really deep geekery, and this product scratches that itch. While it’s not perfect, and you’d never be able to film movies through the wall because of the short focal distance, it’s really nice for hunting for a lost part, watching a part that appears to be failing at times, or just randomly exploring places we can’t actually see into.

Price: $35.99
Where to buy: Amazon
Source: The sample of this product was provided by M Way.

WaterField introduces the Micro Wallet V2.0

When it was first introduced, the Micro Wallet was sold with WaterField’s Cycling Ride Pouch.  People liked the small wallet but suggested some changes.  WaterField has incorporated some of those suggestions in the Micro Wallet V2.0.  One of the changes was to replace the zipper that just went along the top with one that curves around to the side, making it look a bit like the Finn wallet.  This zipper arrangement allows the wallet to open wide for easy access to the contents.  Another suggestion was to make the wallet available as a standalone purchase.

The Micro Wallet has no interior pockets, which helps keep the wallet thin, even when loaded up with your cards and cash.  The wallet can also be used as a simple pouch for storing cables and other small items that could get lost inside your big gear bag.

The wallet is made of either black ballistic nylon or brown waxed canvas.  It measures 4.0″ L x0 .75” W x 2.9” H.  It has a YKK zipper with a self-locking slider to keep the contents secure.  A loop on the outside allows you to clip the wallet into your bag, or you could slide a keyring through there.

This updated wallet is now included with the purchase of a Cycling Ride Pouch, and the Micro Wallet V2.0 is also available as a standalone purchase for $19.00 from WaterField.

Phoozy protects your phone from extreme heat, cold, drops, scratches, and it even floats!

Looking not unlike an astronaut sleeping bag for your phone, Phoozy (cute name) claims to also have space-age powers.  Namely, that “It provides military grade protection from the sun, heat, cold, and shock while also providing float protection.”  It is literally made from materials that are used to protect astronauts from the extreme environments of space, and by the stars, it can do the same for your smartphone.  It features a Chromium shell for heat (up to 200 F)/cold (down to -20 F) protection, a Spacetech Ripstop Penetration Layer for toughness, an Impactor Core Layer for drop protection (military 810G 5165.6)and water flotation and a Soft Touch Protective Liner to gently caress your precious phone.  Phoozy is available for many different makes and models of phones for $29.99.  Rocket over to Phoozy.com for info or to order.