This tracker keeps hikers from getting lost

Compared to the general population, serious hikers are often better than average at understanding environmental factors and keeping themselves safe. Part of the planning process associated with upcoming excursions almost always involves studying maps and routes.

However, as new technologies become available, hikers often invest in tracking devices that make it easier for rescuers to locate them in times of trouble. One particularly worth knowing about is the SPOT Gen3.

Helping friends and family track your route

The often-rugged conditions associated with hiking trips mean friends and relatives probably can’t depend on communicating via phone. However, this tracker sends updates as frequently as every five minutes up to every hour, revealing your location with help from satellites.

The Gen3 also has a vibration sensor that detects when you’re moving and sends tracking information continually. However, it stops when you do to prevent wasting the battery. You don’t need to reset your Gen3 daily or do anything else to keep it in the tracking mode, other than making sure it’s turned on.

Providing a one-way communication method

This device goes beyond telling people where you are and lets you send messages to them. People who’ve used the Gen3 for extended periods point out SPOT is the market leader in one-way communication devices.

In addition to sending a pre-programmed message that says “OK,” you can set up a custom, personalized message before leaving on a hike that reaches up to 10 designated contacts. One set of lithium batteries provides enough power to send 1,250 check-in or custom messages.

Giving you access to emergency responders in the U.S. and Europe

Although there are various ways to send visual and audible distress signals, the Gen3 has an SOS button you can use to get in touch with emergency personnel while hiking throughout the United States and Europe. That feature gives your GPS coordinates and other information to professionals, so they can find you in dire situations.

Informing contacts you need non-emergency help

The Gen3 gadget is useful for scenarios that require outside assistance, but aren’t life-threatening. Its Save Our Vehicle capability sends a message to your contacts, giving them location details and letting them call for help or come to you themselves. Besides wearing the Gen3 on your backpack, you can use it in an automobile, which is probably how the feature got its name.

Other things to know

The SPOT Gen3 has a manufacturer’s suggested retail price of $169.95, but some retailers sell it for $149.99. That cost is for the device itself. The functions described above require a supplementary service subscription. When using more than one Gen3 device, you’ll have to buy a subscription for each of them.

The basic tier costs $19.99 per month for 12 months, or $199.99 if you pay for the whole year at once.

You can also add the Extreme Tracking upgrade, which enables sending updates in two-and-a-half-minute intervals and costs $9.99 per month or $99.99 per year.

You also have the option of buying the GEOS Search and Rescue addition. No matter what, the Gen3 has an active SOS button. However, this extra provides up to $100,000 worth of coverage for search-and-rescue-related expenses, including the use of a private contractor to bring you to safety. It costs $17.95 per year.

Hiking can be dangerous, especially with a lack of preparedness. However, the Gen3 gives the people you care about your location and summons help in emergencies. Visit findmespot.com for more info.

Image by Oziel Gómez

The post This tracker keeps hikers from getting lost appeared first on The Gadgeteer.

Filed in categories: News

Tagged:

This tracker keeps hikers from getting lost originally appeared on The Gadgeteer on April 6, 2018 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Replace your Apple Watch band with the beauty of wood and titanium

If you’re tired of having a band like everyone else, replace your current Apple Watch band with a beautiful wood and titanium band from Jord. Each band has black metal Apple band adapters, links, and buckle mechanism, and they fit either the 38mm or the 42mm Apple Watch.

Bands are available in your choice of ebony, stacked zebrawood and dark sandalwood, stacked walnut and olive wood, or koa wood.  Jord doesn’t specify the length of their Watch bands, but each purchase comes with a couple extra links to extend the band.  They also send a screwdriver for adding/removing links to adjust the band length and to install the correct band adapter.  Jord also sells additional links if you need more for a correct fit.

The Jord Wood Apple Watch Band is $85 for your choice of wood.  Order your new Watch band at Jord.

 

The post Replace your Apple Watch band with the beauty of wood and titanium appeared first on The Gadgeteer.

Filed in categories: News

Tagged:

Replace your Apple Watch band with the beauty of wood and titanium originally appeared on The Gadgeteer on April 6, 2018 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Edge of Belgravia Teak Star cutting boards, UGEARS bionic horse model, Moasure ONE measuring device, and more – Notable crowdfunding campaigns

This week we are bringing you five crowdfunding campaigns that are currently running on Kickstarter. This week’s campaigns are for people who like to cook, get outdoors, build cool models, and more. Check out our picks for this week’s notable crowdfunding campaigns.

Edge of Belgravia Teak Star cutting boards

What is it?
Teak Star cutting boards are luxury cutting boards that can be used for cutting and serving food.

Why do I like it?
I like the Teak Star cutting boards because they have a unique look, are durable, and are resistant to rot, water, and slips.

Where can I find more info?
The Teak Star campaign ends on 5/8/2018 and they have already reached their funding goal of $35,202. You can pre-order a Teak Star starting at $49. After the Teak Star campaign ends, rewards are estimated to start shipping in November 2018. Visit their Kickstarter page for all the details.

UGEARS mechanical wooden models

What is it?
UGEARS are complex mechanical models made of CNC laser cut plywood that can be assembled without the aid of glue, or any special tools.

Why do I like it?
I like the UGEARS models because they aren’t designed to just sit on a shelf gathering dust, they can actually move. We’ve talked about the UGEARS models before on The Gadgeteer, but the Horse-Mechanoid model is the first one that I’ve actually thought about buying for myself. It would be a fun solo project or as a cool family project.

Where can I find more info?
The UGEARS campaign ends on 5/2/2018 and they have already blown past their funding goal of $15,000 by over $100,000. You can pre-order a UGEARS model starting at $39. After the UGEARS campaign ends, rewards are estimated to start shipping in July 2018. Visit their Kickstarter page for all the details.

Quotes Watch

What is it?
The Quotes Watch is a watch that features a dot-matrix e-paper display that you can customize with your own personal message and quotes using the Quotes app.

Why do I like it?
I like the Quotes Watch for the customization options and that specified friends and loved ones can send personalized quotes and messages directly to your watch with the Quotes app.

Where can I find more info?
The Quotes Watch campaign ends on 4/26/2018 and they are getting close to their funding goal of $30,711. You can pre-order a Quotes Watch starting at $92. After the Quotes Watch campaign ends, rewards are estimated to start shipping in October 2018. Visit their Kickstarter page for all the details.

Somewear satellite global hotspot

What is it?
Somewear is a lightweight palm-sized gadget that turns your existing smartphone into a satellite phone that you can use ANYWHERE to send 2 way texts, get weather reports, share your location, and even call for help.

Why do I like it?
I like the Somewear global hotspot because it allows you to communicate anywhere you are in the world because it uses satellite signals instead of cell towers. It’s also built to be tough. It’s shockproof, waterproof and can withstand temps as low as -4 and as high as 140F. Unlike other satellite phones, the Somewear model is more affordable. They will have monthly plans starting at $15/mo.

Where can I find more info?
The Somewear campaign ends on 5/2/2018 and they are working towards their funding goal of $50,000. You can pre-order a Somewear starting at $299. After the Somewear campaign ends, rewards are estimated to start shipping in July 2018. Visit their Kickstarter page for all the details.

Moasure ONE – The World’s First Motion Measure Tool

What is it?
Moasure ONE is a measuring device that uses motion to calculate distance, angle, volume, and area using the same technology used in rockets.

Why do I like it?
I like the Moasure ONE measuring device because all you need to do is move from one spot to the other to get an accurate measurement even if there are walls and furniture in the way. It can even measure irregular shapes which is always a challenge.

Where can I find more info?
The Moasure ONE campaign ends on 4/20/2018 and they have already met and passed their funding goal of $28,161. You can pre-order a Moasure ONE starting at $139. After the Moasure ONE campaign ends, rewards are estimated to start shipping in December 2018. Visit their Kickstarter page for all the details.

The post Edge of Belgravia Teak Star cutting boards, UGEARS bionic horse model, Moasure ONE measuring device, and more – Notable crowdfunding campaigns appeared first on The Gadgeteer.

Filed in categories: News

Tagged:

Edge of Belgravia Teak Star cutting boards, UGEARS bionic horse model, Moasure ONE measuring device, and more – Notable crowdfunding campaigns originally appeared on The Gadgeteer on April 5, 2018 at 4:53 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Spider SpiderPro Single Camera System V2 camera holster review

What is it?

The SpiderPro Single Camera System V2 is an ergonomically designed belt with integrated camera holster that allows photographers to carry their DSLR camera with any length of lens attached, comfortably and safely.

What’s in the box


In the package, the system I received included the SpiderPro belt with integrated Holster and the Pro2 Plate.

Design and features

The SpiderPro Belt is made of a very comfortable material that makes it easy to wear it for long periods of time. The length of the belt is adjustable via the included Velcro that is attached to one part of the inside of the belt. It is a 2-inch-wide belt with a 3-inch padded area around the back that provides extra comfort around the waist. The built-in holster with the locking mechanism is attached to an 8” x 6.5” padded area for your camera to rest on. It is attached via two hex screws from the inside of the padded area.

Built in to the holster there is a spring-loaded mechanism that locks the Pro2 Plate in and prevents it from coming loose accidentally. This spring-loaded locking mechanism must be engaged by pulling it up for the camera to be removed from the holster.

The belt buckle is a strong ABS type plastic clip that has a great and secure locking system to ensure that it never comes loose on its own. The belt buckle is approximately 2.5” wide.

It is important to note that another padded attachment with a holster can be added to the opposite side of the belt to upgrade it to a dual camera system.

The Pro2 Plate attaches to your DSLR and locks into the holster. On one side it has a 1/4 – 20” screw to attach it to your DSLR, and anti-slip rubber grips on either side of the screw to keep the plate in place.

On the other side of the Pro2 Plate, there are two 1/4 – 20” screw holes to allow the DSLR to be mounted to a tripod or other equipment without having to remove the plate. The rounded bolt that locks into the holster can be mounted on the left or right of the plate. There is also a hex driver neatly tucked away on the side of the Pro2 Plate that can be used to attach the plate to the camera.

What I like

I simply love the SpiderPro belt and Holster. The comfort that allows me to wear it for long times, and the reliable security the locking mechanism provides, gives me a sense of safety and security with my rig when I move around during a photo shoot.
I own several photography gear belts and many of their manufacturers claim to be the best at comfort and security, but so far, none of them come close to the SpiderPro. The fact that it handles both short and long lenses with ease is a major plus.


What needs to be improved

The only improvement I would recommend for this belt and holster system is possibly for the redesign of the Velcro system that is built in to adjust the length of the belt. While it is very secure, I found it somewhat tedious to work with when I was adjusting the length of the belt, because it kept sticking together and I constantly had to pry it open again. It is important to note that this is not a flaw but rather just something I would like to see redesigned so that it is easier to work with.

Final Thoughts

I have searched for a long time to find a belt that works for me without it feeling uncomfortable and odd, especially on days when I must wear it for a long time. While the Spider Pro is not perfect, it is certainly one of the best I have tried and especially so at its price point. While anyone using the Spider Pro with a DSLR and a long lens still needs to be careful not to hit the lens against any external object, they will be hard-pressed to find fault with its design or the value that it offers.

Price: $150.00
Where to buy:Spider and Amazon
Source: The sample for this review was provided by Spider Holster.

The post Spider SpiderPro Single Camera System V2 camera holster review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged: , ,

Spider SpiderPro Single Camera System V2 camera holster review originally appeared on The Gadgeteer on April 5, 2018 at 12:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

BDI’s Olis media cabinet allows your soundbar be heard, not seen

 

When purchasing Audio Video equipment, almost as important as the gear you buy is the cabinet you store it in. BDI has come up with the perfect solution to hide your AV gear away in style.

Heard, not seen

The Olis 9650 is an AV cabinet with louvered doors that conceal both component compartments and a dedicated soundbar shelf.

The louvered doors allow for flow-through ventilation and remote control access.

They also allow sound from a soundbar to disperse cleanly and evenly from within the cabinet.

Other features include removable back panels, a cable management system, and a TV safety strap.

Designed by Louis A. Lara, the cabinet contains both stained solid wood and hardwood veneer. And it comes with a warm Toasted Walnut finish. 

With a recommended TV size of up to 65″, the Olis provides big entertainment within a smaller footprint. 

 For pricing on the Olis 9650, you’ll need to find a retailer near you by visiting bdiusa.com.

The post BDI’s Olis media cabinet allows your soundbar be heard, not seen appeared first on The Gadgeteer.

Filed in categories: News

Tagged: , ,

BDI’s Olis media cabinet allows your soundbar be heard, not seen originally appeared on The Gadgeteer on April 5, 2018 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.