HYDAWAY collapsible water bottle review

I’ve always been a big fan of space-saving gadgetry and have become quite skilled at minimalistic travel. I typically carry a collapsible bowl, titanium spork, and an inflatable water bottle. The water bottle was lightweight, but difficult to clean and prone to leakage.  Most of the deficiencies have been addressed with HYDAWAY collapsible bottles. HYDAWAY offers lots of color choices, multi-packs, and travel cases and sent me green and orange as samples. 

Two brightly colored, kid-size and large-size, bottles recently graced my mailbox, packaged in a simple white cardboard box with HYDAWAY’s droplet logo gracing the cover. Inside, a sicker with simple instructions was ready to greet me.  Packaging for the bottles is minimal, with only a cardboard card held in place between the bottle and cap. Everything is recyclable. I appreciate sparing the trees.

Unscrewing the top releases the bottle from packaging captivity. Reattaching the cap provides a tight seal. So tight, in fact, that it’s not possible to expand the bottle’s accordion frame without opening the spout or loosening the lid.  The bottles themselves have a sturdy feeling plastic base and cap. The 21-ounce bottle sports another plastic ring around its midsection when fully deployed. The rest of the bottle is comprised of an accordion-formed rubbery material that is pleasant to the touch.  The bottles are BPA free and top-rack dishwasher safe. Since the opening is quite large, I have little doubt that my dishwasher would have trouble getting all of the innards clean.

The 12-ounce bottle is widest at the bottom, leaving the center of gravity very low which will help avoid spills. The only issue I found with this configuration is the base is too large to fit into the cup holders in my cars. The 21-ounce model expands in both directions and isn’t quite as stable, has a wide enough base to stand independently.  It also fits very nicely in vehicle cup storage. Because the bottom of the cup doesn’t touch the bottom of the cup holder, its weight sits near the middle of the bottle and it’s quite stable, much more so than your average bladder-busting big-gulp, even on the tightest interstate off-ramp.

The bottles squish down to about an inch thick and four inches in diameter. I love the compact size. Interestingly, the small and large bottles are the same size when collapsed. How do they do that? It must be some kind of magic. When compacted, they’re a little larger in diameter than a hockey puck and shouldn’t pose much of a problem tucked into the most efficient carry-on, diaper bag, or glove compartment. Having one of these handy means never having to pay $45 for a bottled water in an airport ever again. Besides, when collapsed, I doubt even the most zealous TSA agent would protest taking these bottles through x-ray. However, with the plastic and rubbery construction, these bottles aren’t insulated so plan on room temperature beverages if you plan on carrying them full for any length of time. A tepid libation is better than none in my book.

Alternatively, the wide openings and tight seals lend themselves perfectly to snack time. Pack these babies full of Goldfish Crackers or Cheerios and have the little ones content through the longest car ride, church service or parent-teacher meeting.

My only real concern is the size. For most, I’m sure they would suffice, but for me, I typically have a mighty thirst and 21 ounces is a bit small. I hope at some point they offer a larger size. Yep, a railroad tank car size would be dandy! HYDAWAY collapsible bottles are well made, compact, alternatives to bulky water bottles.  Ideal for travel, they are sure to reduce the number of plastic bottles lurking in landfills. The 21 ounce, large size, has already found its way into my carry-on bag.

Source: The sample for this review was provided by HYDAWAY. Please visit their site for more info and Amazon to order.

Filed in categories: Reviews

Tagged:

HYDAWAY collapsible water bottle review originally appeared on The Gadgeteer on October 31, 2017 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Mint SIM pairs up with Best Buy to offer 3 Months of free phone service & data

Mobile service provider Mint SIM and BestBuy.com have partnered together to announce a promotion offering new customers three free months of Unlimited Talk & Text including 2GB of 4G LTE each month.

The promotion comes with the purchase of any unlocked device from BestBuy.com with a 7-Day Risk Free Intro Offer. Mint uses the T-Mobile network for their service so as long as you have good T-Mobile coverage in your area, Mint will work great.

“We are thrilled to expand our partnership with Best Buy and bring a truly breakthrough offer to the market,” said Aron North, SVP of Marketing & Creative at Mint SIM. “Combining Best Buy’s enormous unlocked phone selection with Mint Sim’s free service on America’s Fastest Growing LTE Network is truly a win-win.”

“More and more consumers are choosing unlocked phones every day. Mint SIM’s growth has been remarkable and encapsulates how consumers are changing their buying habits when it comes to wireless,” North continued. “As the industry continues to evolve we believe Mint SIM is well positioned to capitalize on these new buying trends.”

For more information about Mint SIM and this new promotion with Best Buy, please visit this special BestBuy.com offer page.

Filed in categories: News

Tagged:

Mint SIM pairs up with Best Buy to offer 3 Months of free phone service & data originally appeared on The Gadgeteer on October 31, 2017 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Computers for Seniors – New from No Starch Press


New from No Starch Press: Computers for Seniors by Chris, Carrie, and Cheryl Ewin. This 332-page full-color illustrated book for the parent, grandparent or older friends in your life that can benefit from easy step-by-step basic computer lessons. The book has 14 lessons that begin at square one with the power button and proceed to sharing images with family, watching crazy cat videos on YouTube, and go up to how to stay safe on the internet, and more.

Computers for Seniors is available now from No Starch Press where you can order a hard copy of the book for $24.95 or a digital copy for $19.95

Filed in categories: News

Tagged: ,

Computers for Seniors – New from No Starch Press originally appeared on The Gadgeteer on October 31, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Parrot’s new Bebop-Pro Thermal drone knows if you’re hot or not

The Parrot Bebop-Pro Thermal is Parrot’s newest drone that isn’t being marketed as a “toy” like the Parrot Swing Drone that I reviewed this past spring. This drone is a tool for people in construction, firefighters, search, and more. What makes this drone different from all the other $1500 price range drones on the market? The Bebop-Pro Thermal uses FLIR thermal imaging technology.

The Bebop-Pro Thermal has two embedded cameras. There’s a 14MP HD video camera and a FLIR ONE thermal imaging camera. The HD video camera can be used for normal visual inspection of roofs, structures, etc. and the FLIR camera can detect a 10° to 160° temperature range which it displays through the Parrot FreeFlight Thermal app.

Thermal images display from red (160°) to blue (10°) in the app for quick identification of thermal losses. I’m sure you can imagine how this would come in handy for building inspectors and search and rescue workers who may be looking for survivors during a natural disaster, storm, etc.

The Bebop-Pro Thermal will be priced at $1500 and will be available in November. Visit parrot.com for more info.

Filed in categories: News

Tagged:

Parrot’s new Bebop-Pro Thermal drone knows if you’re hot or not originally appeared on The Gadgeteer on October 31, 2017 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Miccus Home RTX 2.0 Long Range Wireless Audio Transmitter or Receiver review

Back in May, I reviewed the Miccus Home TX Pro long-range wireless audio transmitter which allows you to transmit a Bluetooth signal up to 160ft. Pairing it with their SR-71 Stealth low latency headphones made it perfect for my late night TV viewing. Fast forward five months and Miccus has a new product, the Home RTX 2.0 Long Range Wireless Audio Transmitter or Receiver. The RTX 2.0 is similar to the TX Pro but as the name implies it also acts as a Bluetooth receiver. I had the chance to review a unit for the Gadgeteer.

In the box

  • Miccus Home RTX 2.0
  • Dipole Antenna
  • Optical / TOSHLINK digital audio cable
  • 3.5mm male to 3.5mm male audio cable
  • Micro USB charging cable
  • USB power supply
  • Users Manual

Specifications

  • Bluetooth v4.2 (compatible with Bluetooth v2.0 or higher), Profiles – A2DP, AVRCP
  • Audio codecs: SBC, AAC, aptX, aptX-LL, (NOTE aptX-LL use requires both devices in a pairing to support the aptX-Low Latency codec).
  • 3.5mm Stereo Audio Input and Output, TOSLINK Digital Optical Input and Output.
  • Operating range: up to 160ft (50M), Operating Frequency: 2.4 GHz.
  • Optical Support: Sample Rate <=48KHz, Formats PCM / LPCM, Dolby Digital 2.0 (Format changes are accessed thru your TV’s audio settings menu)

What is it?

The Miccus Home RTX 2.0 is the first dual-link, long-range wireless transmitter or receiver featuring Bluetooth v4.2 and two simultaneous aptX Low Latency audio streams. Basically, the Home RTX Pro 2.0 acts as a hub for all your wireless home audio. With the 2-in-1 flexibility of a Transmitter or Receiver, the Home RTX 2.0 makes it easy to add multiple long-range Bluetooth audio links to your home setup. It has two different modes, Transmit (TX), and Receive Mode (RX) and features Dual-Link Pairing and Optical Audio Pass-Through.

Transmit Mode (TX)

With the Home RTX 2.0 powered off, select TX mode by pressing and latching the RX/TX switch (located on the back left of the Home RTX 2.0) to the in position. TX mode requires a wired audio source connection, to either the 3.5mm audio input or the TOSLINK/optical audio input. You can use an audio input source like a computer, tablet, smartphone, television or stereo system. For my purposes, I connected the RTX 2.0 to my TV using the TOSHLINK digital optical cable. I chose to power the unit using the provided Micro USB charging cable and one of my TV’s vacant USB ports. When connected via USB the Home RTX 2.0 will automatically power on. If powered off you can power it back on by holding the multi-function/power button for 5 seconds until the LED indicators power on.

Connecting the Home RTX 2.0 to my TV allows me to use it as a wireless audio hub for my living room. Using Transmit Mode (TX) I can listen to video audio sound or music from my TV and connected 4K Apple TV through my Bluetooth headphones; great for my late night TV viewing or listening to music from my iTunes library. With the RTX 2.0’s long-range transmitter connection is never a problem. The manual states that the operating range of the Home RTX 2.0 is up to 160ft. In my testing, I was able to walk 215ft outside my house before I started losing the Bluetooth signal and had great connection throughout my entire house.

I also connected my Amazon Echo Dot to the Home RTX 2.0 and with the unit in RX mode I was able to use the Dot to play music and news through my TV’s soundbar. With the unit in TX mode, I was able to use my Dot as a Bluetooth speaker and stream audio from my TV and connected devices to whatever room the Dot was in.

Note: If television or video audio is your primary use, then I would recommend using Bluetooth headphones/speakers that support the aptX Low Latency codec. I use a pair of Miccus SR-71 Stealth low latency headphones I reviewed earlier and they work great for watching movies, shows, and sports without any lip sync issues.

Receive Mode (RX)

With the Home RTX 2.0 powered off, Select RX mode by depressing and unlatching the RX/TX switch to the out position. RX mode is designed for use with an audio device such as a stereo system or powered stereo speakers connected to either the 3.5mm audio output or the TOSLINK optical audio output on the Home RTX 2.0. In RX mode the Home RTX 2.0 can be used with any device capable of transmitting a Bluetooth wireless audio signal. Including phones, tablets, laptops, and PCs. I used RX mode to play music from my iPhone through my TV’s sound bar and it worked flawlessly. There’s even a friendly voice prompt that tells you when the unit is powered on, when it’s in pairing mode, when it’s connected/disconnected to or from a device, and when it’s powered off.

In RX mode two smartphones or tablets can be simultaneously paired with the Home RTX 2.0. Both devices can also simultaneously stream music to the Home RTX 2.0. To hear audio from only one of the two devices, pause the audio, or use muting or adjust volume. To test this feature I paired both my iPhone and iPad Pro to the unit. I was able to stream audio from both devices to my sound bar and it worked surprisingly well. I’m not sure that I would use this feature very often, but it could come in handy if I ever wanted to try my hand at DeeJaying a party or family get together.

Dual-Link Pairing

Dual-link pairing allows for two Bluetooth receiving or transmitting devices to pair with the Miccus Home RTX 2.0 simultaneously. Pair with two Bluetooth speakers, headphones or 2 phones at the same time. Pairing is quick and easy. To Engage pairing mode on the Home RTX 2.0,  press and hold the multifunction/power button for 3 seconds until the CH light begins fast flashing. I won’t bore you with the rest of the details here, however, if you want to learn more I provided a link to the Users Manual.

The Home RTX 2.0 also has an automatic re-connect feature. If left powered on, or if powered back on it will automatically reconnect to the last paired device when within range.

Optical Audio Pass-Through

Most televisions and stereo systems feature only one optical audio output. The Home RTX 2.0 allows you to receive an optical audio feed from a television or stereo system and transmit and stream that audio feed to two pairs of headphones or Bluetooth speakers simultaneously. The Home RTX 2.0 can then pass that same audio onto a soundbar. You can also use it to link to two or more Home RTX 2.0’s together to double, or triple the amount of low latency audio streams available for use. This is my favorite feature of the Home RTX 2.0. Digital-pass through allows me to listen to my TV through either the soundbar or my Bluetooth headphones without having to switch cables or use an optical audio splitter. It even allows for one person to use headphones while the other listens to audio through the soundbar.

Conclusion

I’m not surprised that I like the Miccus Home RTX 2.0. I use the Home TX Pro that I reviewed earlier on an almost nightly basis. With the added feature of being both a long-range transmitter and receiver along with Optical Audio Pass through this device is a nice upgrade. And with its small size and discreet black case, it blends in nicely on my TV stand.

Whether you want to Transmit or Receive wireless audio throughout your home or to the patio, pool or backyard the Miccus Home RTX 2.0, which is priced at $59.99,  is the perfect compliment to any home AV system. Miccus also offers a 2-year No-Hassle Replacement Warranty.

Source: The sample for this review was provided by Miccus. Please visit their site for more info and Amazon to purchase.

 

Product Information

Price: $59.99
Manufacturer: Miccus
Retailer: Amazon
Pros:
  • Acts as both receiver and transmitter
  • Long range up to 160ft
  • Easy to set up and use
  • Dual-link pairing
Cons:
  • None

Filed in categories: Reviews

Tagged: ,

Miccus Home RTX 2.0 Long Range Wireless Audio Transmitter or Receiver review originally appeared on The Gadgeteer on October 30, 2017 at 10:07 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.