Good “Things” come to those who wait


I’ll admit it, I’m a productivity and to-do app junkie. I’ve used nearly every major to-do and task manager available and followed them through their development and new versions. But none so closely as Culture Code’s Things.

Finally, after literally years in a tight-lipped closed beta, Things 3 is now available on the iOS and Mac app stores. 

Things has been the one task app I kept coming back to after trying out dozens of other apps and systems because of its beauty and simplicity. And the newest version doesn’t disappoint, even after waiting for what felt like an eternity.

Things 3 is available today on iPhone ($9.99), iPad ($19.99) and Mac OS ($49.99). Be warned, it is a paid upgrade, even for those who have already purchased a previous version. To ease the pain, they’re offering a 20% discount on all versions through May 25th. If you liked Things 2, there’s plenty more to love, so jump on that discount while you can.

Check out their site for more information and to download a free 15-day trial version of the Mac OS version.

Filed in categories: News

Tagged:

Good “Things” come to those who wait originally appeared on on May 19, 2017 at 6:23 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Posted by / May 19, 2017 / Tagged with / Posted in News

TYLT FLIPSTICK Portable Power Pack review


What’s the worst tech catastrophe that is only a few minutes or hours away from occurring to you every single day? A dead smartphone battery! If you’re not near an outlet, the threat of no juice is a real nightmare. Am I being melodramatic? Only barely. We count on our phones for so many reasons that backup battery power is a very important commodity. Just like we might carry snacks with us in our gear bag, we should also carry extra power with us for those times when we are away from the power grid and see the dreaded low battery notification. One potential solution is the TYLT FLIPSTICK Portable Power Pack. Let’s check it out.

What is it?

The TYLT FLIPSTICK is a 3,350 mAh portable power supply that is available with a USB Type-C connector, micro-USB connector, or a Lightning connector (for $10 extra).

Design and features

The FLIPSTICK is a 5.25-inch long tube shaped backup battery with a soft touch rubber covering.

Available in gray or blue, the FLIPSTICK has a built-in USB cable that plugs into the top of the FLIPSTICK to create a loop that you can use to attach the FLIPSTICK to a strap on your bag, your belt loop, or something else.

The cable is about 4 inches long on a flexible, soft cable.

In the image above you can also see a + etched into the rubber covering. Below the + is a line of 4 LEDs that light up to show the FLIPSTICK’s battery capacity while charging your device and while the FLIPSTICK itself is charging. Below the bank of status LEDs is a slight divot that is a button that you click to see the current battery capacity status.

On the other end of the FLIPSTICK is the cable that you plug in to your USB Type-C device, micro USB device, or Lightning connector device.

Putting the FLIPSTICK to use

Using the TYLT FLIPSTICK is very easy. First, you plug the black USB cable into a USB port on your computer or a USB AC adapter to charge the FLIPSTICK. You’ll know when it’s finished charging by keeping an eye on the status LEDs. When all 4 LEDs light up, it’s fully charged.

TYLT sent me the USB Type-C version of the FLIPSTICK which I tested with my Nexus 6P which has a 3450mAh battery. Remember that the FLIPSTICK has a battery capacity of 3350 mAh.

Test 1: 6:10 am, the Nexus 6P was at 12% battery when I plugged in the TYLT FLIPSTICK.
The FLIPSTICK ran out of juice at 7:47 am when the Nexus 6P had been recharged to 77%.

7:47 am, plugged the FLIPSTICK into a USB port on a Dell laptop to recharge. The FLIPSTICK was fully recharged at 10:30 am.

… the next day…

Test 2: 7:36 am, the Nexus 6P was at 8% battery capacity when I plugged in the fully charged FLIPSTICK.
The FLIPSTICK ran out of juice at 9:00 am when the Nexus 6P was recharged back up to 73%.

4:07 pm, plugged the FLIPSTICK into a USB AC adapter to recharge. The FLIPSTICK was fully recharged at 7:00 pm.

Final thoughts

Does the TYLT FLIPSTICK provide auxiliary power to USB TYPE-C, micro USB, or Lightning connector capable devices? Yes.

Does the TYLT FLIPSTICK have fast charging capabilities? No.

Can the TYLT FLIPSTICK completely recharge a device’s battery? That depends on the battery capacity of the device and herein lies my main issue with the TYLT FLIPSTICK. It just doesn’t offer enough juice for the price. I can find a huge assortment of backup batteries for $30 that have 2 even 5 times the battery capacity of the 3350 mAh FLIPSTICK.

While the TYLT FLIPSTICK is well made and easy to use, it doesn’t offer enough bang for your buck. My advice is to keep shopping.

Source: The sample for this review was provided by TYLT. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $29.99
Manufacturer: TYLT
Retailer: Amazon
Pros:
  • Easy to use
  • Small
Cons:
  • Small power capacity means you probably won't fully charge your device without draining the FLIPSTICK

Filed in categories: Reviews

Tagged:

TYLT FLIPSTICK Portable Power Pack review originally appeared on on May 18, 2017 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Julie’s favorite gear, Echo Dot, Casio G-Shock watch, Timbuk2 messenger bag, and more – Review updates


It’s time for another round of quick updates to some of our past reviews. We like to revisit reviews days, weeks, months, and even years later to let you know how the product stands the test of time. This round of updates includes a review from over 8 years ago. Click through to see the list of updated reviews and then scroll to the bottom of each review to see the latest update.

Julie’s favorite gear page

Timbuk2 Custom Laptop Messenger Bag Review by Julie Strietelmeier

Amazon Echo Dot 2nd generation review by Michael Strange

Fenix FD40 LED flashlight review by Andy Chen

Casio G-Shock GW9200-1 “Riseman” Review by Andy Chen

 

Product Information

Price:

Filed in categories: Reviews

Tagged:

Julie’s favorite gear, Echo Dot, Casio G-Shock watch, Timbuk2 messenger bag, and more – Review updates originally appeared on on May 18, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Jabra Speak 710 Bluetooth speakerphone review


The first phone earpiece I got was from a company called Jabra. I thought it a funny name, but due to the build quality and excellent functionality, I came to trust that name. I was recently sent my third product from the company, the Jabra Speak 710. It’s in a crowded category, but, to me, at least, it brings some important innovations. This model is an upgrade from their 410 and 510 models that were only for phones. This unit, as we shall see, works with computers and tablets as well.

Note: Photos may be tapped or clicked for a larger image.

The first thing you think seeing the Jabra Speak 710 is “Space Ship.” It looks, for all the world, like the proverbial flying saucer. The full diameter is just over 5″ (13 cm) and the smaller, inner speaker grille is 3.75″ (9.5 cm). The whole unit is less than 1.5″ (3.4 cm) thick.

The main face has the gray metal speaker grille, with holes drilled in a swirling pattern around a chromed Jabra logo. Outside of that, the larger disc is set off less than half an inch (1 cm) lower and made from a smooth, shiny plastic. At the 6 o’clock position (Kids, ask your parents what “o-clock” means!), there is a single visible white on-off button. Holding that lights up all 12 clock points with various symbols and a dot on the perimeter of each. The dots are indicative of volume level: starting at 6 and going around clockwise, you have a 12-point visual division of muted to full volume. In other words, this one goes to 12!

Inside the volume pips, there are various symbols on most of the clock points. To the left and right of power (7 and 5 o’clock) are the off-hook/on-hook phone functions. At 4 o’clock, there is a sideways V that brings up Siri, or whatever vocal assistant your paired device uses. At 3 and 9, the “+” and “-” control volume. At 11 o’clock, there is a BlueTooth indicator that glows blue when paired, flashes when searching or discoverable, and white when not connected. At one o’clock, there is a battery-life symbol, which turns red when the battery needs attention.

On the back is a fold-out stand, which sets the unit on a level surface to 56º. There is also something that most Mac users will not recognize: a Bluetooth dongle. This is for folks using devices that don’t have Bluetooth built-in but have a full-sized USB port. Plugging this puppy in (and downloading your OS’s drivers for it) will give your hardware the same capabilities that most modern computers have from the factory. If you’re using an older computer without BT 4, you’ll probably want to turn off your built-in Bluetooth radio and enable this one instead.

Under the outer rim, slightly to the rear, is the full-duplex mic. (You can see it in the photo below.) Full Duplex means that you can both talk and hear at the same time. (Phone-arguing mode, FTW!) The mic is omnidirectional, so that as many as 6 people can be around it easily. (I did not test this feature, but I did wander around the room while on several calls, and the caller never said my sound was garbled or hard to understand.)

The last physical feature of the Jabra Speak 710 is the captive USB connect/charging cable wrapped around the outer edge, just behind the control ring. It has a generous 3 foot-plus (1 meter) cable and is permanently attached. Using this, you can connect it to any computer that supports USB audio. Connecting it in this way will also charge the battery as you’re using it, if the port supports charging through USB. Having the cable be captive also prevents two irritatingly common happenings – forgetting your charge cable, or inserting it incorrectly and breaking off the charging port inside the device. While it’s certainly irritating to have the cable wrapped around the speaker, it is fairly well out of sight, unless you’re needing a charge. You can even charge while using the speaker, which may prove to be of benefit. (Note that there is no AUX-type connection.)

Included with the package is a black neoprene case that holds the unit easily, and zips closed to protect it. In a nice design touch, the pull for the zipper echoes the Eiffel Tower-esque profile of the rear stand. Style points, Jabra.

So, with the ease of set-up, clear indications of power, volume, and connectivity, how does the Jabra Speak 710 actually sound? In a word, marvelous. I get quite a few devices like this to review, and I was in the kitchen with the Lovely Bride while unpackaging this one. She rolled her eyes at the saucer shape, but I powered it up and paired it with my phone in about 15 seconds. We had to call someone right then, so I asked Siri to dial the number and we talked over the speaker. Once the call was over, I asked her opinion. “That’s the first one you’ve had that I’d actually consider using.” High praise, indeed!

Speakers that work with your smartphone have been around for several years now. The first one I remember that made any mass-market difference was the JamBox, during the 2010 holiday season. Since then, they have exploded, covering every size, shape, and level of sound. They are a major category on the store shelves of Best Buy, Fry’s, Target, Walmart, and even the difficult-to-enter Apple, as well as review websites like The Gadgeteer. This offering from Jabra, to me, is one of the most pleasant-sounding and -looking one in quite a while. With the captive USB cable and clear function indicators, I can’t say enough about the thought and attention to detail that went into this unit. Bravo, Jabra.

Source: The sample for this review was provided by Jabra. Please their site for more info and Amazon to order.

 

Product Information

Price: $299.00
Manufacturer: Jabra, Inc.
Retailer: Amazon
Requirements:
  • Audio source
Pros:
  • Well-modulated sound
  • Striking looks
  • Visual indicators for settings
Cons:
  • None, really

Filed in categories: Reviews

Tagged:

Jabra Speak 710 Bluetooth speakerphone review originally appeared on on May 18, 2017 at 7:32 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Pitaka Aramid iPhone 7+ Case review


Pitaka Amarid iPhone 7 Case

Take a look at your phone. I mean, really look at it. Chances are if you’ve purchased or acquired a new phone in the last few years, it’s shiny and sleek and svelte. Or at least it was until you put that bulky case on it. Do we really need to wrap our sexy communication devices in a layer of aluminum and hard rubber just to keep it safe? Case maker Pitaka is out to challenge that notion with their line of thin, aramid cases.

Ara-what?

Aramid, short for aromatic polyamide, is a synthetic fiber that can be formed into rigid polymer chains, similar to carbon fiber. However, aramid is non-conductive, making it perfect for phone cases, as it does not interfere with reception. Its high strength and resistance to abrasion, solvents, and heat allow for the creation of an extremely thin case that is 5 times stronger than steel of the same weight.

Thin. Light. And strong.

Pitaka basically created a phone case for people who hate phone cases.

The case itself is only 0.65mm thick, yet it’s extremely rigid. It has very minimal flex and installs easily. The fit is dead-on and isn’t a hassle to remove like some other thin cases I’ve tried. Others tended to be too thin, and warped after a short time, bowing out at certain points and feeling like they just weren’t a good fit. But this case, even after several weeks in my pocket, is still a perfect fit. It’s like a second skin.

What’s in the box?

Hey, a free screen cover! Nice little bonus if you’re into that sort of thing.

The Pitaka case comes with the case itself and also a bonus tempered glass screen protector, which is a nice bonus until you realize that it’s almost certainly necessary for full front-to-back protection. This is because the case itself does not extend past the front of the screen. It’s not even flush with it. Personally, I like that about the case, as having that extra “lip” around the sides of the screen makes it difficult to properly input a swipe from the edge of the screen.

I went ahead and installed the glass screen protector, anyway, just to get the whole experience as the manufacturer intended. It was a fairly easy process and was easily removable for when I had to reposition it to work out all the bubbles. But after a couple of days, I couldn’t get used to it. Even though it was very thin and recognized all of my inputs just fine, it felt like a speed bump for my fingers every time they brushed over the edge. And there was a noticeable outline on the front of my black phone. I couldn’t take it anymore and removed it after several days.

That did leave my screen completely unprotected, something certainly worth noting.

Baby Soft

I really like the feel of this case. It’s soft to the touch and grippy, but not overly so. Now that I think of it, it sort of feels like a firm banana peel. Think of that level of waxiness. It slides easily into my pockets and doesn’t pick up dirt, lint or hand oils.

Like a second skin that feels like actual skin.

The precision port, speaker and button cutouts on the sides of the case are spot-on. The case really is like a very thin second coating on the phone. And because of the aramid weave, it’s very scratch-resistant and the color won’t fade.

Oddly enough, the main reason anyone puts a case on their phone — protecting it from a drop — is the one thing I thankfully didn’t get to test. I imagine that it would absorb some impact, but not much, and definitely wouldn’t protect the screen. If you’re prone to dropping your devices, I’d have to suggest a much thicker case.

Hello, handsome.

But there are plenty of us who want to let their thin phones run naked and free. I honestly don’t like phone cases. But since Apple insists on making their phones difficult to hold on to, they sort of forced my hand.

Fortunately, Pitaka has you covered. If you want protection, added grip, and don’t want to make your phone feel like a rubber brick, put the power of aramid to work for you!

The Aramid iPhone 7+ Case is available now from Pitaka in a variety of colors for $49.99. It is also available in additional sizes for the iPhone 6, 6+ and 7 as well as the Galaxy S7 Edge, S8 and S8 plus phones.

Source: The sample for this review was provided by Pitaka. Visit their site for more information and Amazon to order.

 

Product Information

Price: $49.99
Manufacturer: Pitaka
Retailer: Amazon
Pros:
  • Extremely thin and minimalistic
  • Adds nice texture and grip vs. no case
  • Easy access to ports/buttons
Cons:
  • Does little to protect the front of the phone
  • Only minimal protection from long drops

Filed in categories: Reviews

Tagged:

Pitaka Aramid iPhone 7+ Case review originally appeared on on May 17, 2017 at 10:32 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.