Home 2017

Survivor Hax Tactical Flashlight review

Like any Gadgeteer worth his/her salt, I love, Love, LOVE flashlights! Even though the most common use is when walking the dog at night, I still like to have a light that can pierce the darkness at the push of a button. The Survival Hax Tactical Flashlight is very similar to many that you’ve seen reviewed on this site, but there are a few little things they bring to the table that set it apart.

Note: Photos may be tapped or clicked for a larger image.

A 10 watt LED at 1000 lumens is not too shabby of a place to start. The Survival Hax encases this bright LED behind a zoom lens that will throw a beam hundreds of feet through the darkness, or pull back to fully illuminate an area about 80° in front of you with bright white light.


The simple tail switch cycles through the five included modes – Full, Medium, Low, Strobe, and SOS. Once the light is on, a partial press of the rubber covered button will cycle to the next mode. The only drawback to this cycle is that when you turn it off while in, say, Low power when you next turn it on, it’s in Strobe. I’d love to have a way to keep it at a setting every time I turn it on.


Included in the package are two nice add-ons: a battery charger for the (included) 18650 Lithium battery, and an insert that will allow you to run the torch with three AAA batteries, should you not have a charged 18650 handy. The life of three AAAs pushing that much power is not nearly as long as the 3 hours of full power the Lithium will provide, but they are available everywhere and may be easier to find in a pinch. (AA and AAA batteries will be useful as currency during the Zombie Apocalypse, I hear!)


To top off the package, there’s a nice webbing wrist strap that attaches to the tailpiece through an eyelet, and the rubber gasket over the button glows in the dark.
It is IP66 rated, which means it is protected from total dust ingress and protected from high-pressure water jets from any direction. Not for your next snorkeling adventure, but for that plumbing leak you’re fighting under the sink or searching for that lost cotter pin in your woodshed amid the sawdust, it’s not going to kill the light.

Source: The sample for this review was provided by Survival Hax. Please visit http://survivalhax.com for more info and check Amazon for pricing.

 

Product Information

Price: $39.99
Manufacturer: Survival Hax
Retailer: Amazon
Requirements:
  • None
Pros:
  • Comes with charger and Lithium battery
  • Adapter for very common batteries included
  • Weatherproof
Cons:
  • Adjustment takes two hands
  • No way to lock unit into one mode – each off/on switch progresses it to the next mode.

Filed in categories: Reviews

Tagged:

Survivor Hax Tactical Flashlight review originally appeared on The Gadgeteer on July 23, 2017 at 9:56 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Bodyguardz iPhone case, ANNKE security system, M&D headphones, and more – Weekly roundup

Where did Saturday go? I usually post these weekly roundups late on Saturday afternoons, but somehow the day got away from me, so I’m a day late. That’s ok though, browse through this list of the news, reviews, and articles that we posted last week. It will go prefect with your Sunday breakfast.

Reviews

Articles

News

Filed in categories: News

Tagged:

Bodyguardz iPhone case, ANNKE security system, M&D headphones, and more – Weekly roundup originally appeared on The Gadgeteer on July 23, 2017 at 8:35 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

VR Real Feel Racing 3D reality simulator review

Virtual reality gaming continues to grow in popularity and VR headsets are all over Amazon and other online retailers. Today I want to show you the VR Real Feel Racing set. This is a VR headset that comes with a wireless steering wheel controller for a fun 3D racing simulation. Let’s check it out. 

What is it?

VR Real Feel is a VR headset that connects via Bluetooth to a handheld controller to give you a real world feel of racing a car.

What’s in the box?

VR Real Feel VR headset
Handheld controller
Quick start guide

Design and features

The VR headset is similar to other VR headsets that I’ve reviewed in the past. It’s made of plastic, doesn’t require any batteries or power to operate.

It’s basically a holder that you wear on your head that has bee designed to hold your smartphone in front of your eyes and two lenses.

Adjustable elastic straps are attached to the headset so that you can customize the fit.

The front of the headset unlocks to reveal a spring-loaded holder for your smartphone.

I used my iPhone 7 Plus in a Rock iPhone case to test the VR Real Feel. It fit just fine in the spring-loaded holder and I had no problems snapping the headset closed with the phone in place.

To round out the racing set, there’s a battery powered Bluetooth handheld remote controller that is included with the headset.

The controller has grips so that you can hold it between your hands like a racing steering wheel.

There are two round thumb buttons located perfectly where your thumbs rest while holding the controller. There are also two “shoulder buttons” on the edge above the thumb buttons that are placed where your index fingers rest.

The controller is powered by 3 AAA batteries which is a bummer if you don’t have any on hand when you unbox this device. Yes, I’m speaking from experience.

Drivers, start your engines!

To start racing, you will need to find 3 AAA batteries and load them into the handheld controller. You’ll also need to install the VR Real Feel racing app on your iPhone or Android device.

When you start the app, it will ask you to scan for the steering wheel controller. To do that, flip the power switch on the back of the controller and press the scan button in the app. It will find the controller and connect via Bluetooth.

It will then ask if you want to play the game with or without the VR headset and will then instruct you to load your phone into the headset and put it on.

I wear glasses and am happy to say that the headset fits over my glasses without any issues. That said, the headset felt heavy on the bridge of my nose. When I tried to wear the headset without my glasses, the plastic nose piece in the headset felt sharp against the bridge of my nose so I did not find the headset to be comfortable no matter how I tried to adjust it.

Even though the headset was not comfortable to wear for very long, I was able to race several times with the headset, controller and VR Real Feel app and found it to be pretty fun once I got used to the controls and navigating the menus.

The game has several race tracks and levels that you can drive.

There’s a dirt track race.

A city track race.

 

 

There are even wacky tracks like dino world, under water, robot factory, and more.

The controller is easy to use while driving as it’s a simple matter of pressing the thumb buttons to control gas and braking.

While racing, I was surprised to find out that the handheld controller has some force feedback features that cause it to vibrate when you hit an object or go off the road. This contributes to the virtual reality feel of the game to make it feel more realistic and fun.

Final thoughts

If you can get past the comfort issue with the headset, this virtual reality headset, and controller racing set is a lot of fun. At least than $30, it’s inexpensive and can be used to play other VR games. I would say the VR Real Feel is the least comfortable of the VR headsets that I’ve reviewed so far, but it’s definitely better than the other VR headsets that I’ve reviewed so far because it comes with a controller.

Source: The sample for this review was provided by VR Entertainment. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $29.99
Manufacturer: VR Entertainment
Retailer: Amazon
Requirements:
  • iOS or Android mobile device with Bluetooth 4.0 BLE
Pros:
  • Fun to play
  • Multiple tracks
  • Handheld controller with force feedback
Cons:
  • Controller requires 3 AAA batteries which aren't included
  • Headset can feel heavy and uncomfortable

Filed in categories: Reviews

Tagged: ,

VR Real Feel Racing 3D reality simulator review originally appeared on The Gadgeteer on July 22, 2017 at 4:18 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Let the solar system tell you the time of day

The Galaxy Magnetic Clock from Brando is a unique wall or table top timepiece that mimics the rotation of planets in the solar system to tell the time of day. The circular clock holds three magnetic balls which represent planets and the sun.

In the center of the clock is the sun and Earth, Venus, and Mars orbit around it by a hidden mechanism that uses magnets.

The blue Earth ball is the hour “hand”, Mars is the minute “hand”, and Venus is the second “hand”. The motorized clockworks is powered by 1 AA battery which is not included.

The Galaxy Magnetic Clock is priced at $56 and can be purchased from Brando.

Filed in categories: News

Tagged:

Let the solar system tell you the time of day originally appeared on The Gadgeteer on July 22, 2017 at 2:21 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

BodyGuardz Trainr Pro iPhone case review

With so many wonderful exercise tracking apps on smartphones these days, it seems like a waste of a good run to leave it at home. The trouble is finding a safe way to take it with you. Luckily, there are much better options than pocketing your device and having it slap against your thigh for a few miles, or carrying it in your sweaty hands, threatening to shoot out of your grip like a blade of soap. Enter the Trainr Pro.

This case/armband solution converts from everyday phone to workout companion, and back again when you’re through. I feel I should tackle this review in two parts since there are two individual pieces that have two distinct purposes… the case itself and the fitness band.

Part 1: The Case

The Trainr Pro case is fairly no frills. It’s not particularly handsome, but that’s not its goal.

Nothing exciting, but it does the trick. The sides are imbued with slots to snap it into the armband.

Once the phone is in the case, which was easy enough, even with the rigid sides, the edge of the case is a surrounded by a rubber, shock-absorbing material. It’s got a nice grip and texture to it as well, so it works as a decent everyday case. Covering the back is a thin, semi-transparent sheet of plastic with a good-sized cutout for the camera lens. The case doesn’t add very much weight or bulk to the already large iPhone 7+, but it certainly does drop the sexiness of the device a bit. I was never a fan of phone cases, and this is yet another case that reminds me why. Your mileage may vary.

Part 2: The Band

Accompanying the solid, grippy case is the armband. It mirrors the same sturdy construction and aesthetic of the case, sporting the same black and gray color scheme, along with strips of lighter, reflective material.

The fabric of the band is smooth and seems as if it would fit most arms. I could imagine if you’ve got some serious biceps, you might have to make do with your phone being strapped to your wrist or forearm, but that’s an extreme case. Once I got the band positioned on my arm and secured the velcro strap, it didn’t budge. The fabric is smooth and comfortable, not padded, but it doesn’t really need it.

The iPhone 7+ is one of the largest phones ever made, and it’s got some weight to it, to be sure. Despite that, there wasn’t too much bouncing around of the phone on my arm… I really only noticed it when making very quick movements. The case is very secure when strapped in place. Almost ridiculously so. I should elaborate.

My first mistake when using the armband was to place it on my arm before attempting to attach the case. It’s nearly impossible to gain the leverage to snap the case in place while the band is on your upper arm. There were several moments in my first couple runs where I ended up walking for minutes on end trying to get the case to click into place.

First of all, it’s tough to align the tabs on the case with the grips on the band, as there isn’t much margin for error. They must be more or less perfectly aligned. Then, the force it takes to snap the case in place is more than I thought it would be. It’s easier to notch one side of the grip plate in place and then sort of push out on the other side while pressing down on the front of the phone. Even while doing this, it still takes a good deal of force.

But once that thing is in place, it’s not going anywhere. And that’s really what you want when you’re strapping your $800 phone to your arm just so you can run. At its core, the Trainr case functioned beautifully.

Miles down the road with minimal bouncing and no slip.

I feel like I’m getting the hang of taking the case in and out of the armband, but I’ll admit that the first few attempts were a bit worrisome. With all of those horror stories of people bending their iPhones with seemingly little effort, it always makes me cringe a little feel like I’m going to twist or torque the screen too much.

It could certainly be much easier to get the phone in and out of the armband holder. Though their website states that it’s a “snap,” it feels like more of a pry.

Conclusion

All in all, after testing it on several runs, I’d give the Trainr high marks on what it promises. It’s a shame that the unique snap-on function couldn’t be a little bit easier to use. Given the case’s expensive and delicate contents, I hate to twist and press and bend something that has my phone in it. But I think for many people, it would be a good way to take their phone with them.

See you on the road!

The Trainr Pro is available now from BodyGuardz for $49.95.

Source: The sample for this review was provided by BodyGuardz. Please visit their site for more info and to order. Check them out on Amazon too.

 

Product Information

Price: $49.95
Manufacturer: BodyGuardz
Retailer: Amazon
Pros:
  • – Case is very sturdy and drop-resistant
  • – Armband and case are very secure during activity
Cons:
  • – Phone and case are tricky to get in and out of the armband frame
  • – Case itself is nothing to get excited about

Filed in categories: Reviews

Tagged: ,

BodyGuardz Trainr Pro iPhone case review originally appeared on The Gadgeteer on July 22, 2017 at 8:32 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.