SANSI 30W LED Security Motion Sensor Outdoor Light review

We’re in the middle of remodeling the exterior of our house. It had wood painted wood siding and it’s currently (I can hear the contractors hammering right now…) getting vinyl siding. As luck would have it, a few weeks ago SANSI contacting me to ask if I might like to review their 30W LED Security Motion Sensor Outdoor Light (model C2440-FW). Since we’ve been actively replacing all the indoor incandescent lights with LED lights, I was happy to start the process outdoors as well. Let’s see how the update turned out.

What is it?

The SANSI 30W LED Security Motion Sensor Outdoor Light is a bright light that is designed to be installed outdoors and automatically turns on the light when motion is detected.

What’s in the box?

SANSI LED Security Light
Bar shaped mounting plate with 3 screws
Waterproof gasket
3 Wire connectors
Mounting bolt
Rubber screw plug

This outdoor security light looks similar to other motion activated security lights that I have on the outside of my house.

The SANSI has a swivel motion sensor in the center with two banks of lights on either side.

Where this security light differs from my others, is that the lights have LEDs instead of expensive halogen bulbs that can be a hassle to replace.

Each bank of lights has 4 LEDs arranged in a line. SANSI sells a different version of this light that has the lights in a 2×2 configuration instead of a 1×4 configuration like you see above.

The light has 3 wires coming out of the base, and there are two switches and a light sensor on the bottom of the motion sensor.

The switches can be configured to set how long the lights will stay on (1, 5, or 10 minutes) and the motion detection range.

Most people will want to use this as a motion activated light, but you can set it to manual mode which only works at night and can cause the light to be on for up to 6 hours at a time. When I asked for more details about this mode, here’s what the SANSI rep told me:

Manual Mode (Working Mode) Which is similar to dusk to dawn mode, because the default mode of this product is the Motion Sensor Mode. If you need the Manual Mode, you may have to set it up to Manual Mode every time you need.
Set-up: Flip the light switch off for one second then back on to toggle between AUTO and MANUAL mode.
Function: Under Manual Mode, the light could be on at night for 6 hours.

*Note: Manual mode only works at night and with the ON-TIME switch in the 1, 5, or 10 minutes position.

Installation

I was going to install the SANSI light myself so I could write about any issues that came up while doing so. But the contractors saw the box and did the install before I even realized it. The included instructions are pretty straight forward and with only 3 wires it is probably hard to screw up the install, so let’s just say it was really easy especially if you’re replacing an existing light. Just know that the SANSI light has to be connected to a 120V power source.

This is what the SANSI 30W LED Security Motion Sensor Outdoor Light looks like when it’s installed.

You can adjust the angle of the motion detector as well as the lights.

Although the image above doesn’t really give a good indication of how bright the SANSI security light is, let me tell you, it’s a very bright flood light! It’s much brighter than the light I previously had in the same spot. The LEDs are equivalent to 250W incandescent light. I have noticed that the SANSI LEDs have a colder look instead of the warmer yellow light of my other security lights. The specs say that the SANSI LEDs are 5000K Daylight. All I know is that they are bright.

They’ve been installed for about a week and are working as expected. I have them set to come on when motion is detected and stay on for 1 minute. The motion sensor is triggered when I walk under the light and when I pull out of the garage every morning when it’s still dark outside. The sensor has a range of 180 degrees and max 50 feet. I have it set for my short driveway and it’s been working great.

Final thoughts

If you want to update your outdoor lighting to LED lights that are as bright (or brighter) than incandescents, but use less electricity, SANSI’s 30W LED Security Motion Sensor Outdoor Light is a good choice.

Source: The sample for this review was provided by SANSI. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $59.99
Manufacturer: SANSI
Retailer: Amazon
Pros:
  • Very bright
  • Easy 3 wire install
  • LED bulbs should last for many years
  • Motion settings for time and range
Cons:
  • None

Filed in categories: Reviews

Tagged: ,

SANSI 30W LED Security Motion Sensor Outdoor Light review originally appeared on The Gadgeteer on August 17, 2017 at 12:15 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

ThinkSound ts03+mic headphone review

You Gadgeteers all remember wired earbuds, right? What am I saying – everyone gets a pair of these with their phone, even if it’s an iPhone 7 with no headphone jack! The quality of those bundled earbuds, however, can vary widely. ThinkSound has been doing a lot of work on improving the sound of headphones and earbuds by incorporating wood enclosures into them, like fine speaker cabinets of old. Their latest creation is the ts03 + mic, which brings light weight and crisp bass together for your music and phone talking. Guess who got a pair to test. Yep. This guy!

Note: Photos may be tapped or clicked for a larger image.

Here are the specifications from their website:
• Microphone + call/music control for mobile communication
• Compatible with iOS and Android devices
• Wooden housing for crisp, accurate music reproduction
• 20 Hz – 20 kHz frequency response
• 99 ±3 dB @ 1KHz 1mW sensitivity
• 16 ohm impedance
• 45˚ angled gold plated plug for increased clarity & durability
• Acoustically enhanced 8mm driver
• 10g Ultra-lightweight design
• Kevlar-reinforced, tangle-resistant 4 foot long cable
• Passive Noise Isolation minimizes ambient sounds
• Sweat-resistant design, perfect for the gym
• Four flexible silicon ear inserts for a secure fit (s/m/l/xl)
• Cord clip, cotton carrying pouch & hard case
• One (1) year limited warranty

The earbuds arrived in ThinkSound’s new “package-free” packaging: It’s all packed into a tin box with clear labels that can be used to protect the ts03s in your bag or pocket. If you don’t need that much protection, there’s also a light cotton drawstring bag. I really like it, but I’m curious to see how this packaging design fits into brick and mortar stores. It’s one thing for a $1 box of mints, but for a $200 set of earbuds, that’s another story.

The angled plug is a nice touch, sticking out at 45° from the line of the jack. This gives a bit of strain relief. There are three feet of cord from the plug to the branded metal divider, and 15” of cord for each earbud from the divider. With lead-in cords this long, it’s easy to route them behind your head, in case they would be in the way during exercise. There was a little ambient noise from touching or rubbing on the cable while wearing them, but not enough to be distracting. If you’re doing highly active exercises, it may get in the way, but for biking, walking, or running, it shouldn’t be an issue, once you turn on a little music. I found I could listen at about half volume on my iPhone 6s Plus for most music. Depending on mike placement and the audio engineering, many podcasts were listenable at this level as well.

The fit of the ts03’s is adjustable with 4 sizes of tips. The collar of silicon stands out from the central core, to isolate the speaker into the center of your ear canal. I was pleased with the sound space this provides. I listened through the ts03’s for several hours via Spotify, including tunes from The Rescues, Joshua Radin, Van Morrison, Train, and Jeff Buckley. The acoustic pieces were like you were sitting in the front row of a live set. I tend to listen for little things, like turning on guitar pickups, turning pages of music, and the like. The scrape of a pick against the wrapping of a string, or an overdubbed vocal line. These buds let you dig into the picky little bits like that if you want to. Or you can just enjoy the feeling of being there. I never had the feeling that the earbuds were going to fall out. Once I started listening, everything else outside of the sound fell away.

I have really gotten used to wireless earbuds, but every now and again, usually when I’m reviewing a pair of wired earbuds, I’ll remember how quick and easy it is to plug in a cable and immediately have the sound in my ear. There’s no worry about video lag-time, where you hear the sound a split-second before you see what caused it. There are no batteries that may fail halfway through a listening session. (This is my current pet peeve for wireless earbuds!) The mic is right there on the cord by my jaw, rather than up on an earpiece, so if I want to have a quick aside with someone, or sneeze before I can get to the mute or whatever, I can grab the mic and block out my caller. Plus, wired headphones are never paired to another device that you have to go hunt down in another room or in your backpack, unpair, and re-pair to your current device. They just jack in and are playing, and that can be a good thing.

At $199.99, these are not throw-away units, by a long shot. They give you a truly deep experience of listening. If you want to hear the quality of what you’re listening to, the ts03s are going to deliver it. Yes, they are still earbuds, but they give an incredible amount of sound to you through that form.

Source: The sample for this review was provided by ThinkSound. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $199.99 on think sound website, $119.99 on Amazon
Manufacturer: ThinkSound
Retailer: Amazon
Requirements:
  • AUX/phone sound source
Pros:
  • Quality cables (wiring) and connectors
  • Great sound and isolation
  • Warm, low tech outer look belies high tech insides
  • Waste-free packaging
Cons:
  • none, really

Filed in categories: Reviews

Tagged:

ThinkSound ts03+mic headphone review originally appeared on The Gadgeteer on August 17, 2017 at 9:11 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

WaterField Designs Air Porter crowd collaborated travel bag is now available for order

After four months taking ideas from their fans and frequent flier customers, WaterField Designs has unveiled their new Air Porter carry-on bag.

The Air Porter has been designed to slide and stand up under the airline seat in front of you. It has two compartments that offer ample storage for all your important gear and it has a pass-thru on the back that allows you to slip it over a wheeled suitcase handle for easy transport.

The Air Porter is TSA-friendly, offering a zip open and lay flat design that allows the bag to go through TSA check point X-Ray machines without removing your laptop.

There are two versions of this bag. One made of waxed canvas and the other is made of ballistic nylon. Both are priced at $359 and are available for order through www.sfbags.com with shipping on September 15th.

Filed in categories: News

Tagged: ,

WaterField Designs Air Porter crowd collaborated travel bag is now available for order originally appeared on The Gadgeteer on August 17, 2017 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Alto iPhone 7 Plus Metro leather case review

When I think high-end luxury leather phone cases, a couple brands come to mind like Vaja and Orbino. So how is that I’ve never heard of or seen the leather cases from Alto? If you’ve never seen them either, let me introduce you to what might be your next favorite iPhone 7 Plus case.

What is it?

The Alto iPhone 7 Plus Metro leather case is a thin but protective snap-on cover for the back of your iPhone 7 or 7 Plus.


The Metro case that was sent to me is made of Italian full grain black and caramel stained leather that covers the outside of a hard case that has a black micro fiber lining on the interior. Other color combos of this case are also available.

The back of the case might look like it’s two toned with the brown and black, but the look hides a card slot that can hold 1-2 plastic credit cards or a couple folded bills.


An iPhone 7 Plus snaps into the case with little effort and can be removed with slightly more effort.

The sides of the Metro case are raised slightly higher than the top of the iPhone to protect the display if you lay it upside down.

The left side of the case has an open cutout for unrestricted access to the mute switch and volume buttons.

The opposite side of the case has an open cut out for the power button.

The top edge of the case (not pictured) is completely covered, while the bottom edge is open to reveal the speakers and lightning port.

If you flip the case over, you’ll see a large opening for the camera and LED flash.

The card slot on the back of the case is ideal if you want to leave your wallet at home and just carry your driver’s license and a credit card. The card slot is a snug fit so you don’t have to worry about your cards accidentally slipping out if you hold the phone upside down.

Everything about the Metro case is perfect, from the design and materials to the craftsmanship. I have zero complaints.

If you prefer a phone holder case instead of a case that snaps on the back of the phone, Alto has that covered to.

Their zippered wallet case is equally nice and can hold the phone, credit cards, cash, and more.

Final thoughts

If you’ve been searching for a quality iPhone 7 Plus case that looks great, doesn’t add too much bulk, but allows you to ditch your wallet, then you need to check out the Metro leather iPhone case from Alto. It’s my new favorite case.

Source: The sample for this review was provided by Alto. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $72.00
Manufacturer: Alto
Retailer: Amazon
Pros:
  • Great craftsmanship
  • Doesn't add much bulk
  • Built in card slot
Cons:
  • None

Filed in categories: Reviews

Tagged: , ,

Alto iPhone 7 Plus Metro leather case review originally appeared on The Gadgeteer on August 16, 2017 at 1:54 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

MadPax backpacks will turn heads

Do you march to the beat of your own drum, not satisfied to blend in with the rest of the world around you? Then you are going to love these unique backpacks from MadPax. These bags are not your average run of the mill boring black Walmart special backpacks that all your friends are carrying. Everything about MadPax backpacks is cool… well, except for the name because I keep wanting to call them maxipads. Stop judging me.

MadPax backpacks feature 3D designs that include spikes, bubbles, blocks and more.

The bags are made of a variety of materials like PVC, Poly Urethane, and polyester/spandex fabric.

MaxPad backpacks are available in a large assortment of colors and patterns and in sizes from toddler up to adult. Prices range from $30 to $105 depending on the size and style.

Visit MadPax.com for all the details and The Grommet and Amazon to order.

Filed in categories: News

Tagged: ,

MadPax backpacks will turn heads originally appeared on The Gadgeteer on August 16, 2017 at 11:36 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.