DxO ONE camera attachment for iPhone and iPad review

I have been a digital photographer for over 15 years now. I started with the equivalent of an Instamatic, and moved up to a prosumer, then full DSLR cameras. I have bought and sold lenses, filters, and other equipment. While I don’t pretend to know how to adjust f-stops and ISO for challenging conditions, I have made some nice photos, been paid for some and awarded prizes for others. I’m rarely ashamed or embarrassed by my work. I’ve also bought into the iOS ecosystem hook, line, and sinker. So it was only a matter of time before I subsumed to the Siren call of the DxO ONE iOS camera. I pre-ordered this about three years ago, and my Lovely Bride kept asking “What is this charge on our credit card?” to which I would reply “It’s a new camera. It’ll be here any day now.” She’s sweet to believe in me. And she’s seen much more funneled into my photography habit. And it only took nine months to ship!

Note: Photos may be tapped or clicked for a larger image.

DxO has a long history in Photographic software. Their measurement software for photo accuracy is an industry standard for many. The DxO ONE, however, is the first piece of hardware they have produced. It doesn’t look much like a standard camera. For one, it doesn’t have a viewfinder of any kind. Second, there is no way to see what your settings are. The first version, before the first firmware update, could only shoot from within an app on a connected iOS device.

A physical release pops out a lightning connector, and attaching it to your iPad, iPod touch or iPhone launches the software that controls the camera and turns your device’s screen into a viewfinder.

While that was cool enough (and the DxO ONE’s 25-megapixel sensor easily bested the resolution of the 8 megapixel iPhone 5s I was using at the time), the first firmware update added the ability of the unit to take pictures independently of the iPhone using the black-and-white screen as a rough viewfinder. (Yes, black-and-white. Zero shades of gray. Think original Macintosh. See picture below – loads of dithering. Those are the boards of my deck, through a glass table.)

Crazy as it sounds, this is a James Bond/Man from U.N.C.L.E-type spy camera. I can pull something out of a cigarette pack that doesn’t look like a camera and grab a really, really good photo in dim light. In full color. My 10-year-old self would be screaming for joy about now. I regularly use it for concerts and candid shots, but just this weekend, I discovered what the newest firmware update added: remote control. As in, I can turn this camera on, set it up, and walk away, and snap photos from it at will from anywhere on the same wifi network. (Pictures below are of me snapping hummingbird photos. The first pic is focused on my phone, the second photo is focused on the DxO ONE on the tripod. Since the devices are both on wifi, I could have been anywhere on my network monitoring the camera.)

And the camera is so quiet and unassuming, it’s more stealthy than some nanny-cams. And, as I was researching further, I found it can also be controlled from an Apple Watch! Sure, you don’t get the nice preview with the watch like you do with the iPhone, but you can hit the shutter release without touching it, or looking at your camera screen.

Another advantage of using the Lightning Port is that you can easily pull the camera off and turn it 180° to make a selfie camera of amazing quality. (It doesn’t help the subject matter, sadly, but you get more details to edit out.)

Sometimes, you find a case that doesn’t give good access to the flat area around your Lightning port, but there are many on the market that do. I recently spent some credit card points on a tripod mount and lens mounting adapters, in hopes of finding a decent telephoto lens to fit.

Since this is a camera review, I guess I should have some comparison shots from a known camera. I shot three scenes on full auto indoors with no flash, outdoors with full sun, and indoors in a dimly lit area with flash. The ones on the left were taken with the onboard iPhone 6s Plus camera. The ones on the right were taken with the DxO ONE attached to the same phone. (The DxO is attached to the lightning port, so it’s on the opposite end from the built-in phone. This is what accounts for the slight shift in point-of-view.) The only changes to the basic auto setting I made was to force flash to fire in the indoor flash shot. There are no lights turned on in the room, or in my mini-studio, only the camera flash. The images are full-frame with no cropping or enhancement added.


 


 

 

 

 


 

In the first shot, it’s easy to see the increase in light the ONE’s sensor makes. There is some fuzziness, but that’s to be expected with handheld shots. The shutter button on top of the ONE makes you have to pay much more attention to camera shake since it’s a physical button, rather than the virtual button on the iPhone app.

In the outdoor shot, things look equal in the well-lit areas, but the details under the shade, like the bark on the tree left of center, fall apart on the iPhone. If you’re wanting to get all CSI on the background, like my neighbor’s garage or porch area, the DxO has way more data to play with.

In the final flash set, the body of the camera is about the same, with a little fuzziness on both shots. The texture of the strap in the DxO shot is far more clear when you blow it up, however. Given the distance from the light source, the lighting is better, too.

So, is the difference worth the price? Hard to say. Three years ago and two generations of camera phones, it was to me. On our last vacation, most of my travel photos were taken with just the iPhone 6s Plus. While I always wish for more glass for zoomed shots, I was very happy with the outcome. Adding a clip-on polarizing filter (which is not easily doable with the DxO) made a lot of difference in sunny outside shots.

Computational photography is making the size of the sensor obsolete much faster than the “camera guys” are improving the optics of camera hardware. Given Cupertino’s income from sales, they have far more resources to spend in this area than companies like Canon and Nikon, let alone poor little DxO. But, still, it’s a neat gadget, and I don’t regret purchasing it. Meanwhile, the price is down $100 from what I paid, but with the software updates, I’m still up to date. I love living in the future.

Source: The item for this review was purchased with personal funds. Please visit DxO for more info and Amazon to order.

 

Product Information

Price: $469.99 (retail is $499)
Manufacturer: DxO, Inc.
Retailer: Amazon
Requirements:
  • iOS device
Pros:
  • Small and light.
  • Tight build quality.
  • Software under active development.
  • Easy to connect to iOS device.
Cons:
  • It's so small, attaching lenses is difficult, and finding quality lenses is difficult.
  • Some cases don't let it fit device fully.

Filed in categories: Reviews

Tagged: , ,

DxO ONE camera attachment for iPhone and iPad review originally appeared on The Gadgeteer on August 14, 2017 at 8:30 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Great ideas: Water bottle with built in pill storage

I’m lucky that I no longer have to take prescription medications, but for those of you that do, check out this water bottle that has a built in pill holder.

The 20-ounce food grade polycarbonate bottle holds water or other beverages, but it also holds your daily meds in its built-in 7 slot pill box.

Each pill slot is labeled with a letter for the day of the week to keep your medication neatly organized. The pill holder can also be removed from the bottle for cleaning.

The BPA free water bottle has a screw top that doubles as a cup. It looks like a great idea for hikers, or anyone else who is on the go.

You can buy a bottle for $7.69 from www.newchic.com and you can find them on Amazon too.

Filed in categories: News

Tagged: ,

Great ideas: Water bottle with built in pill storage originally appeared on The Gadgeteer on August 13, 2017 at 11:52 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Douni A5 Bluetooth speaker review

After reviewing a handful of portable Bluetooth speakers, I’ve found that some really appeal to me like the UE Megaboom because of its great sound quality (it has some bass!) and long battery life among other things, but others like the Logitech x300 do not. The Logitech x300 tends to dampen mid and upper frequencies when bass frequencies are playing. When the Gadgeteer was offered the Douni A5 Bluetooth speaker, I volunteered to review it to see how it compares to other portable speakers I’ve tried. After testing it, I’d say it competes rather well in the audio quality department, but not so much in the Bluetooth range department.

Contents

  • Bluetooth speaker
  • Power adapter
  • 3.5 mm Aux audio cable
  • Owners Manual

Technical Specifications

  • Battery Voltage: 11.1V
  • Charging Voltage: 15V
  • Output Power: 2*12.5W
  • Speaker Spec: 58mm, 12.5W (and has two passive radiators)
  • Frequency Response: 50HZ~18KHZ
  • Lithium Battery Capacity: 6600mAh
  • THD<0.5%
  • SNR:>90dB
  • Dimensions: 8.6″ long x 2.9″ wide x 3.5″ high (218 mm long x 74 mm wide x 88 mm high)

Design & Build Quality

The Douni A5 Bluetooth speaker feels like a durable speaker. It is a rectangular speaker that is black on the top and bottom and has a gray metal grill. It is the size of many other portable speakers (not the super small ones…). Its dimensions are 8.6″ long x 2.9″ wide x 3.5″ high and it weighs 2 lbs. 9 oz.All of the controls are located at the top of the speaker. The entire top of the speaker is covered in a rubbery material except for the plastic silver ring around the buttons.
The back of the speaker contains the ports. The ports are (from left to right): Aux Audio In (to physically connect a mobile device to the speaker), Aux Audio Out, 15V DC In (to charge the speaker), 5V Out (to charge your devices), and a Reset button (resets the speaker to its factory default settings).The bottom of the speaker is also covered in rubbery material to prevent the speaker from moving around while on furniture.

Use

Powering On/Off: When turning on the speaker, you must press the Power button for two full seconds. To turn it off, you must press it for one full second. If you have a device plugged in via the Aux audio cable, the speaker will not turn off.

Auto shut-off: After about 40 minutes of inactivity, the speaker is supposed to automatically shut off according to the Douni A5 product description on the Amazon. However, I was not able to replicate that – the speaker remained on until I turned it off.

Bluetooth Pairing: After powering the speaker on for the first time, it immediately went into pairing mode in which the Bluetooth symbol on the speaker flashed alternately blue and red. At this time, I needed to go into my device’s Bluetooth settings (first I made sure Bluetooth was turned on) and look for the newly discovered device listed as A5. After tapping on the A5, my speaker was connected and a voice prompt on the speaker said, “Connected”. It is possible to pair up to eight devices to the speaker (which means that the speaker will remember that it has been paired to eight of your devices). When the speaker is powered up the next time, it will connect to the device it was connected to last. To change to one of the other seven paired devices, you can press the Bluetooth button on the speaker for one full second to disconnect the speaker from the current device (a voice prompt will say, “Disconnected”) which will then put the speaker into pairing mode (the voice prompt then says, “Pairing”), after which you can go into your other mobile device’s Bluetooth settings to tap on the A5 in the list of paired devices to connect it to the speaker. Even though the speaker remembers up to eight devices that it has been paired with, this speaker apparently cannot be connected to more than one device at a time, unlike the UE Megaboom which can be connected to two devices at the same time and thus can play music from both devices without having to stop and disconnect from one device to connect to another.

This speaker is also NFC capable which means that you can pair it with an NFC equipped device. When NFC is turned on on your mobile device, you’ll only need to pass it over the NFC area on the speaker which is located just above the Volume Down/Up controls as shown in the photo above (Note: you may have to search for the NFC area on your phone). Pairing the speaker to my Nexus 6 phone was very easy using NFC. When passing the lower right quadrant of my phone (where the NFC hardware location is) over the NFC area of the speaker, my phone displayed this message, “Are you sure you want to pair the Bluetooth device A5? Yes or No”. After tapping on “Yes”, I was paired. When paired and connected, the speaker and device volume controls are in sync.

In the photo above, you’ll also notice the microphone next to the NFC area on the speaker that picks up your voice when using the calling features of the speaker.

The above photo also illustrates how the rubber top really attracts dust and lint. This is difficult to keep clean and this was as clean as I could get it!

When powered on, the speaker has LEDs to indicate its status. In addition, when the speaker is moved or it thermally senses your hand near the control panel, the control panel buttons light up for a few seconds so that you can find the correct controls when the speaker is in a low light setting.

LEDs (from left to right): There is an LED battery symbol, three LED dots, an “AUX” LED (not lit up in the above photo), a Bluetooth LED, and control panel backlights.

The three red LED dots indicate the level of battery charge: one dot = 30%, two dots = 60%, and three dots = 100%. When the battery is low on charge the Battery LED symbol will flash red (you will also hear a series of tones indicating low battery charge); otherwise, it will shine green.

When you physically connect your device to the speaker using an audio cable, the “AUX” LED shines green.

When your speaker is paired and connected to a device via Bluetooth, the Bluetooth LED symbol slowly flashes blue (and a voice prompt says, ”Connected”). When the speaker is in pairing mode, the Bluetooth symbol alternately flashes blue and red (and a voice prompt says, ”Pairing”).

As stated earlier, the control panel uses backlighting to illuminate the buttons for a few seconds when the speaker is moved or if it thermally senses your hand near the control panel. Thermal sensors – that’s pretty cool. You don’t have to turn the lights on to control the speaker.

Bluetooth Connectivity and Range: After pairing and connecting the speaker to my devices (Nexus 6 phone and iPod Touch 6G), just after turning it on, periodically I found that the connection would drop for a fraction of a second several times (within about a 15 second timeframe) and my device was only about one to two feet away from the speaker. This happened enough times to make this distracting and frustrating. I also noticed that with only one wall separating my device from the speaker, I frequently lost connectivity. When testing the line-of-sight distance from my Nexus 6 phone, I was only able to go 10 feet away from the speaker when the connection started to drop. When doing the same test with my iPod Touch 6G, I was only able to go 20 feet before the connection started to drop. Oy! This is exceedingly disappointing especially when the Bluetooth range is supposed to go up to 66 feet according to the A5 product description on Amazon.

Charging Time: The User Manual states that the recommended charging time is four hours. When charging it with the provided power cord, the LED dots would flash in sequence until a certain level of charge was attained (upon reaching 30% charge, the first LED dot remained on, and when reaching 60% charge the second LED dot also remained on, then when reaching 100% charge, the third dot also remained on). Even though the manual says the speaker should charge for four hours, I noticed that it took only about 1.5 hours to fully charge the speaker. When I charged beyond the 1.5 hours, there were no differences in the status lights.

Using the A5 as a Charger: If you should need to charge your mobile device in a pinch, you can do so using this speaker. However, it only provides 5V/1A so the charging will be slow.

Playback Time: When the speaker is set at a moderate volume level, my test revealed that the speaker would run for about nine hours. The User Manual states that the speaker should run about 12 hours. Of course, the playback time depends on the volume you play it at, but I expected that when the speaker is set at a moderate level, it would last nearly 12 hours.

Controls: I noticed that when using any of the control panel buttons, I needed to press each for one full second (except for the Power button which needed two full seconds when turning the speaker on). A simple split-second tap was insufficient to get the buttons to work properly. Once I learned the proper way to operate the controls, all of them worked well. I could play/pause, skip forward/back a track, or increase/decrease the volume levels. Holding the volume buttons down would increase or decrease the levels more quickly.

Calling Features: When you are connected to the speaker via Bluetooth and you receive a phone call, you must press the Call button for a full second to answer the call and press again for one full second to hang up. Call clarity on both sides was adequate. When I answered the call on the speaker and spoke within about eight inches from the microphone on the speaker, there were no issues. If I was a foot away or more, the caller indicated that my voice started to echo and was less clear.

Aux audio-in: When you connect your device using a 3.5 mm audio cable, this device supersedes Bluetooth devices. I also noticed that the volume on the speaker and device are not in sync when connected this way, thus, you’ll need to find your preferred volume level by adjusting it on both devices.

Frequency Range: Using my Audio Test Tone Generator Android app, I was able to comfortably hear 50-17,000 Hz frequencies (well, my kids heard them) when the speaker was set at moderate volume.

Audio Quality: This speaker can truly fill a room with music – it’s loud – at least it is to me. This speaker’s audio quality was quite impressive. It sounds just about the same as our UE Megaboom and it didn’t dampen the upper/mid frequencies like the Logitech x300 when playing bass-heavy music like Silent Shout by The Knife. Other music genres like classic rock (the Famous Final Scene by Bob Seger & The Silver Bullet Band), Celtic/new age (The Highwayman by Loreena McKennitt), and classical music (Clair de Lune) sounded crisp and clear. The vocals and the guitar on The Highwayman were beautiful to listen to. It is my perception that the speaker tends to slightly favor the mid to upper frequencies but I am not an audiophile so take that with a grain of salt – or several grains of salt.

Final thoughts

The Douni A5 Bluetooth speaker is quite wonderful to listen to until you get more than 10 feet away from it at which t_me th_ ___nection _tarts to _rop (“…time the connection starts to drop”). Yep. My studies have shown conclusively that this speaker suffers from separation anxiety. In addition, the controls need to be pressed one full second to work properly. The call features work well and the speaker does charge quickly (1.5 hours) but a full charge will only give you about nine hours of playback time when the speaker is set at a moderate volume level (as opposed to the 12 hours that the User Manual states). Even though the speaker sounds great, the Bluetooth range problems drive me crazy, thus I would personally pass on this speaker.

Source: The sample used in this review was provided by Douni. Please visit their website for more information or Amazon to purchase one.

 

Product Information

Price: $69.99
Manufacturer: Douni
Retailer: Amazon
Pros:
  • -Wonderful audio quality
  • -Charges quickly
  • -Has thermal sensors to detect when your hand is near the control buttons to illuminate the buttons
Cons:
  • -Bluetooth range is awful
  • -Control buttons need to be pressed one full second to get them to work properly
  • -Speaker plays for about nine hours on a full charge when it is set on a moderate volume level instead of 12 hours like the manual says

Filed in categories: Reviews

Tagged:

Douni A5 Bluetooth speaker review originally appeared on The Gadgeteer on August 13, 2017 at 9:27 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Thinkware dascam review, OURA fitness tracking ring review, Samsung Galaxy Tab S3 review, and more – Weekly round up

It’s time to check in with The Gadgeteer to make sure you didn’t miss one of our hands-on reviews or informative news posts from the past 7 days. Click through to browse the complete list of postings.

Reviews

News

Filed in categories: News

Tagged:

Thinkware dascam review, OURA fitness tracking ring review, Samsung Galaxy Tab S3 review, and more – Weekly round up originally appeared on The Gadgeteer on August 12, 2017 at 4:58 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Have cat, will travel…with U-Pet Bubble Pet Carriers

If you can’t bear leaving your little Muffin at home, then you may want to look into this U-Pet Bubble Pet Carrier. I’m not kitten, it’s the cutest and most functional pet carrier I’ve seen in a long time. Sure, there are carriers out there right meow that may have all the functionality, but not that adorable little window for your sweet kitty to peer out of! 

There are multiple designs available to choose from and there is a built in security leash, a soft washable pad on the inside and it’s been approved by most major airlines. The carrier itself is 4.1 pounds and will hold a pet up to 16 pounds. This design is available for $148.99 on Amazon and you can go directly to the U-Pet website to get a better look at all the designs they have. Curious people will no longer have to ask to look inside your carrier because your cat will have already made eye contact with them as you walked by.

Filed in categories: News

Tagged: ,

Have cat, will travel…with U-Pet Bubble Pet Carriers originally appeared on The Gadgeteer on August 12, 2017 at 4:12 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.