Saddleback Leather Mountainback Front Pocket Gear Bag review


Saddleback Leather has built a reputation based on distinctive, durable leather bags and accessories that invoke the spirit of adventure. Saddleback has steadily introduced new styles and designs since their inception, but 2016 brought us a new material choice in the Mountainback product line: waxed canvas. I’ve spent a month testing the Mountainback Front Pocket Gear Bag, one of the newer designs in the lineup. It’s a completely new thing, yet still distinctively Saddleback. Ready to find out more? Let’s go adventuring!

Materials & Construction

Saddleback Leather claims that they sourced the finest materials available to build the Mountainback waxed canvas line, and it shows. The primary material in the Front Pocket Gear Bag is 24 oz. olive/green waxed canvas imported from Scotland. It’s thick and supple to the touch, water repellant, and develops its own unique character over time as it collects marks and scars from your daily adventures. You’ll find ridiculously thick 1/8″ “old bull” leather used in the trim, handles, and reinforcement points throughout the bag. All the hardware is custom made from beefy, surgical-grade, rust-proof 316 steel. It’s an impressive roster of materials that give the whole bag a substantial, rugged feel.

    

Materials are only as good as the construction that keeps them together, and the build on this bag is equally impressive. All the waxed canvas edges on the bag are trimmed off with marine-grade polyester stitching in dark brown to match the leather, with extra reinforcement at every corner. All major use points are reinforced with the old bull leather on both sides of the canvas which has been both stitched and secured with hand-pounded copper rivets. The back and the base of the bag both have massive pieces of thick leather for added protection and additional bag structure. After a month of extensive testing, I’ve yet to find a stress point that isn’t overbuilt to take years of sustained abuse.

It is important that to note that all of the quality materials come with a cost in overall weight. The Front Pocket Gear Bag comes in at 5 pounds unloaded. It’s lighter than some of Saddleback’s all-leather offerings in a similar size but still pretty substantial for day-to-day carry.

Saddleback Leather’s president, Dave Munson, has stated that he took a lot of queues for the Mountainback line from sail construction to ensure that the waxed canvas build would be as tough and durable as the leather products he is known for. I think he’s succeeded in that goal. There’s a ton of careful attention to detail here to ensure that the build quality matches the material choices.

Design and Function

The basic form factor of the Front Pocket Gear Bag is that of a flap-over messenger, with some clever innovations that add functionality and usability. We’ll work our way from the inside to the outside of the bag in this review, looking at the details as we go.

The overall measurements of the Front Pocket Gear Bag sit right in the “just right” sweet spot for a work/casual bag at 12-1/2″ tall by 15″ wide by 3-3/4″ deep. The main compartment is 11-1/2″ by 14″ by 3-3/4″, allowing there’s plenty of room to load a 15″ Thinkpad, a tablet, a notebook, and still leave room for extras. There’s a pocket on the back wall of the interior that will accommodate a 13″ MacBook or iPad Pro (you can even add a notebook), but bigger laptops will ride in the main area. The unstructured nature of the waxed canvas is really accommodating, allowing you to overstuff or pack an assortment of oddly-shaped items. Got lunch and a light jacket to throw in with your laptop? No problem. Need to haul a six-pack and tools to the campfire? Done.

(Side note: the six pack in the picture is Kona Brewing Company’s, Koko Brown. It’s a nut brown ale with hints of toasted coconut. Smooth, nutty and highly recommended!)

You have 6 pockets to organize your stuff, starting with the two side pockets. These pockets are tall and narrow, measuring 6-1/2″ by 3-1/4″ by 3/4″ each. They will take a an iPhone 6s in a case, but it’s a tight squeeze. I feel that these pockets are better suited for longer, thinner items like pens, knives, or a multitool. A cigar case would fit nicely in these as well.

Under the flap you will find the pockets that give the bag its name, and they are my favorite part of this particular design. Each pocket is 11″ by 6-1/2″ wide and 2-1/2″ deep, big enough to take larger water bottles. You can fit a bunch of smaller stuff in these like power bricks, iPhone chargers, sunglasses cases, etc. without compromising the space in the main compartment. There’s no closure mechanism for these pockets, but the top 3″ can be folded over and secured when the bag’s flap is locked in place. These pockets are attached to the bag on three sides, giving you a pair of bonus stash pockets behind them for quick access items like a phone, a wallet, your passport, and the like. It’s a great setup that gives you lots of organization options.

(Side note #2: that’s a Tervis 24 ounce mug in the picture, and its fits quite well in the front pocket. And yes, that’s my Star Wars mug… not my kid’s!)

The messenger-style flap on the bag also sports some clever tricks. A flap that is wider than the opening keeps the elements from getting into your bag, and the heavy-duty leather grab handle uses a sliding design that sits flat when not in use. The closure mechanism is something new to Saddleback designs, and is taken from old-style military bags. First you’ll find a steel d-ring secured to each front pocket. A pair of leather straps on the flap can be hooked into these rings by slots cut into the straps, and then secured with an additional leather strips (including a pair of leather pull-tabs) that slide through the rings. It’s an ingenious setup that enables you to quickly open the bag without fumbling with clips or buckles. As with the rest of the bag, every detail on the flap and closure has been considered for reinforcement at key wear points and quality construction.

  

This attention to detail continues with the shoulder strap. The strap material is primarily waxed canvas that looks to be doubled over then heavily reinforced with extra stitching. The clips are chunky, stainless steel monsters with heavy-duty spring clips. The attachment points on the bag itself use heavy-duty 1″ grommets, reinforced with leather and additional canvas strips on the inside and the outside of the bag. The strap is adjustable with another stainless steel sliding clip that does not slide about when secured. Finally, the strap pad is a thick, 9″ piece of the old bull leather that stays put where you set it. The whole strap design is ridiculously overbuilt, and could probably be used to tow a small boat in a pinch.

Rounding out the design, we have two thick leather pads that provide additional structure and protection to the bag. The pad on the base not only provides protection when you put the bag down, but it also enables the bag to stand on its own without tipping over. The back pad is marvelous, adding comfort and preventing the bag’s contents from poking you while moving about. The combination of these two elements give the bag some structure, but don’t take away from the floppy flexibility the waxed canvas provides to adapt to your packed goods. The back pad is also open at the top, so you can stash a tablet or notebook in there if you like… just don’t stash small items in there, as there are gaps between the rivets that would enable those items to fall out if you are on the run.

The Bag In Use

There’s something alluring about Saddleback’s rugged, go-anywhere brand image that I appreciate. But image isn’t everything…a good bag has to provide strong functional usability if you’re going to living with it every day. After a month of testing, I believe that the Mountainback Front Pocket Gear Bag is an excellent performer in the day-to-day grind (as well as the occasional wild adventure). It also has a ton of personality.

The Front Pocket Gear Bag is a deceptively simple, adaptable bag. It’s big enough to haul your work gear for the office commute, yet adaptable enough to be your go-to bag for day trips, travel, and weekend adventures. The pocket design gives you plenty of flexible organization options, including quick-access areas for regularly used items. The closure system is simple but secure, enabling quick access to your content when you need it. It will take the elements in stride if you wander off the beaten path, but still works great if you’re hopping on a train to go to a meeting in the city. It’s very easy bag to live with in all kinds of situations.

From a style perspective, this bag is all about that rugged adventure vibe. It’s a good looking travel companion, and wouldn’t look out of place paired with a fedora and a bullwhip (and perhaps a golden idol?). I’ve been using it as my daily work bag, and it looks great in office settings that lean towards business casual… I think pairing it with it with a suit for a formal meeting is a bit of a stretch. You’re good to go taking it anywhere else from the coffee shop to the beach to the flea market. Some additional color options would be nice to appeal to different tastes, but I think the green choice is a good all-around neutral color for most situations. It also looks fantastic paired with the dark brown leather.

If you know Saddleback products, you know that they tend to be heavy given the use of all of that thick leather. At 5 pounds this bag is not a lightweight, but it is definitely lighter than all-leather Saddleback products of similar size. I have found it to be surprisingly comfortable to carry. The shoulder strap is really excellent and does a great job distributing the weight. 5 pounds empty is still a heavy bag, however, and weight can add up quickly as you start loading up your stuff. You should consider your daily carry requirements if you’re considering this bag and weight is an issue for you.

The Mountainback Front Pocket Gear Bag has no buckles, snaps, or zippers to close the interior pockets. This means no additional hardware that could break, and enables quick access to all parts of the bag. This can be problematic on flap over-style bags like this, however, as you don’t have many options to secure your important doodads. I prefer to use organizer pouches for all of my little stuff, so I don’t have an issue with this. Sometimes on bags like these things tend to fall out when the bag is tipped over. I have not experienced this in a month of use, as the deep pockets tend to keep things from falling out… it is something to be aware of, however. I’ve seen no issues so far with the closure style on the flap, but some may wish for a more secure option (like buckles) as seen in the leather Saddleback lineup. It’s really a matter of personal preference, and the trade off for quick access to all of your things at any time.

As far as durability goes, it’s a beast. Waxed canvas builds up a patina as it gets used, and you can see from my pics that this bag has been through its paces in the first month. Other than these marks, I have not seen any sign of wear & tear in any stitching or key stress points. I am traveling several times over the summer for work & vacation, and I’ll update this report as I go.

Pricing and Value

It is important to consider pricing on this bag, as it ain’t cheap. At $440 the Mountainback Front Pocket Gear Bag is a significant investment. Given the price, I think it is important that we take a moment to discuss the relative value of this particular bag.

The market for waxed canvas products varies wildly, but there aren’t too many designers playing on the premium end of the business where I would put the Mountainback products.  Some smaller designer shops like Vermylea Pelle and Defy Bags come to mind, and Filson is legendary in this space. All of these brands build higher-end waxed canvas bags at price points that are similar than the Mountainback line (some offer less expensive options), but there is still a wide variety of design and materials choices that make a straightforward comparison difficult. Filson, in particular, has a

Its also important to consider that the $400-$500 price range puts this bag in the same category with a whole lot of premium competition. You’re stepping into a bracket that includes all kinds of leather options, luxury brands, and even custom bags from smaller design shops. I think that the Mountainback Front Pocket Gear Bag holds its own in this category based on the quality and craftsmanship in the design, but there are lots of options available for you to consider based on your style and personal preferences.

Saddleback also offers a range of bag designs in the Mountainback lineup including satchels, backpacks, and gear bags with prices starting at $150 (and some lower-priced accessory bags). Sizes and features differ from the Front Pocket Gear Bag, but you’ll get the same quality, materials, and construction you see here. Check out their site for more information.

Conclusion

I’m a fan of quality bag design, and I think that Saddleback Leather has made a great product in the Mountainback Front Pocket Gear Bag. While its a completely new design and material choice, it’s still got that adventurous vibe that Saddleback is known for. Attention to craftsmanship is apparent in every aspect of this bag from the hardware & material choices to the rock-solid construction. It’s a great multifunctional bag with excellent usability that works well as a work bag, a travel bag, or a general-use day bag. It’s a significant investment at $440, however, so you’ll want to be sure to consider all of your options before you dive in. Saddleback does offer a variety of styles in the Mountainback lineup at their website in addition to the Front Pocket Gear Bag, with pricing ranging from

I’ll be sure to update you on my adventures with this bag as I continue to use it. Thank you for reading!

Source:  The sample for this review was provided by Saddleback Leather Company. Visit their site for more info and you can also find this bag on Amazon.

 

Product Information

Price: $440.00
Manufacturer: Saddleback Leather Company
Retailer: Amazon
Pros:
  • Excellent functional usability
  • Outstanding materials, hardware and construction
  • Adventurous personality & style
Cons:
  • Pricey at $440
  • Heavy at 5 pounds empty
  • May not work in business-formal environments

Filed in categories: Reviews

Tagged:

Saddleback Leather Mountainback Front Pocket Gear Bag review originally appeared on on June 13, 2017 at 7:02 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

PageFlip Firefly Bluetooth/USB page turner review


When I played the piano growing up, I remembered the days when I needed an extra person to turn the pages in my sheet music so that I could play uninterrupted.  Nowadays, sheet music can be displayed on tablets giving rise to an accessory device that can signal a page turn using your feet.  The PageFlip Firefly is a newer electronic page turner iteration from a company that has produced these type of devices since 2004.   We will be reviewing the Firefly in my usage scenario of playing the violin and piano.

PRODUCT DESCRIPTION

The PageFlip Firefly is an electronic music page turner intended for anyone that displays sheet music with a tablet.  When one depresses a foot pedal on the Firefly, it sends a defined keyboard keystroke via USB/Bluetooth into your music software to signal a page turn.  It is compatible with Windows, Android, macOS, iOS and Linux.

REVIEW HARDWARE

The Firefly was reviewed with a Windows 10 tablet PC using Bluetooth connectivity. I used a music score PDF display program called MobileSheets which could accept a variety of keyboard keystrokes to turn pages.

UNBOXING AND SPECIFICATIONS

Boxed in cardboard and housed in a plastic tray, the Firefly includes a six foot long micro USB cable and quick start guides in multiple languages.

The Firefly is primarily composed of two pedals forming an upside down heart shape.  The pedal surface is slightly ribbed with a small LED near the bottom.  I was initially surprised by the surprisingly short amount of travel for the pedal to actuate.

The top of the unit features various sliding switches for “power”, “light”, and “repeat”.
There are 5 “mode” pushbuttons each with an individual “mode LED” to indicate selection. The “mode” determines which type of key press is sent to your tablet. Out of the box, the default modes are: page up/down, left/right cursor, up/down cursor, left/right mouse click, return/backspace.

At the back of the unit are two 3.5mm ports to plug in 2 extra external pedals or switches (not included) that can send additional keystrokes.
There is a micro USB port to connect to a tablet and also receive power.
Finally, 2 small depressed pushbutton switches can reset the “modes” to a default setting and also activate Bluetooth discovery.

At the bottom of the device is a small sliding door for 2 AA batteries (not included).

Overall, the Firefly feels like a solid sturdy device weighing in at nearly one pound.

SETUP

The Firefly requires two AA batteries. Additionally, you can use the micro USB port to draw power from a tablet, PC, or 5V (cell phone) wall charger.

Set up was extremely easy with the Firefly. After pressing the “Bluetooth Reset” switch, the 5 mode lights blinked in sequential order to indicate a discovery status. I simply went into Windows to “Add Bluetooth Device” where the Firefly immediately appeared as a device called “Premium Pedal”. The option to “pair” was presented, and once you clicked it, a status bar quickly completed and indicated a connection. It was nice that there was no need to type anything like a unique identifying passcode. Apparently, this was all supplied in the background. And while I could not test this aspect, you could reportedly have multiple Fireflys in proximity near fellow musicians without concerns over crosstalk or interference.


USAGE

Once the Firefly is set up via Bluetooth, you slide the power switch to “on” where the Firefly connects to your tablet.

Even though it was my first time using a device like the Firefly, it didn’t take long for me to get accustomed to the operation of a pedal based page turner.  In its default settings, the rightmost pedal will turn the page while the leftmost pedal will turn it back.  Typically I would depress the pedal with my left foot as my right foot was typically used for the sustain pedal on a piano.  Sitting down with a violin, I would use my left foot and it felt natural to use.  However, standing up with the violin, I felt a little more uncomfortable using the Firefly, as you can’t really constantly “hover” your foot over the device in this posture.  So this required a greater leg movement and a higher propensity to miss the pedal entirely when you’re not looking at the ground.   Also, it isn’t often that I will need to turn back a page, so I tended to clock the Firefly in an orientation so that the rightmost pedal is in-line with my foot. This arrangement completely prevents my foot from accidentally striking the leftmost pedal since sometimes I may move around a little bit when I play an instrument.

The pedal action, I think, is appropriate for it’s intended use as a music page turner. There is not a lot of travel required, as a light touch is all it takes to send its signal. Probably the most important aspect of the pedal design is that it is completely silent during its actuation. There is no sound of plastic clicking or colliding when you depress or allow it to rebound.

If you’re playing in the dark environment and want to be able to find the Firefly below you on the ground, you can turn the “Light” switch to “on”. Each pedal has a single white LED at the bottom of the pedal allowing you to easily find it in the dark. I found the light dim enough to not be a distraction.

Speaking of lights, there is a blinking red light that indicates the Firefly is on and active. I wish there was a way to turn it off. It’s small enough of a light to not cause a distraction to me, but I don’t know if others may find it annoying.  This light does indicate that the Firefly is on and active.  To preserve the batteries, the Firefly goes asleep after 30 minutes of inactivity.  A pedal tap wakes the device and it will re-establish the Bluetooth connection.  A new set of AA batteries will reportedly last you 400 continuous hours with the white LED lights off or 200 continuous hours with the white LED lights on.  The red LED will flash quickly to warn you if the battery is wearing out.

To this point, I had been mostly using it on a hardwood floor, but what about a less stable substrate? To test this, I tried using the Firefly on typical house carpeting and also on a thick shag rug. In both instances, I was still able to operate the pedals with no problem, as it doesn’t require much force for the pedal to register. Overall, the device will feel “mushy” as you’re pressing the pedal down as well as driving the device down into the carpet. Despite that environment, it will still work.

Selecting one of the mode switches will change the type of key press that the switch is assigned to.  Since MobileSheets can accept a variety of keypresses to indicate a page turn, it was able to use any mode except for the mouse click.

If your particular music software needs a keypress that isn’t one of the default modes on the Firefly, PageFlip supplies a Mac or Windows utility that allows you to change the mode settings. This utility is easy to use as well. While keeping the Firefly connected via Bluetooth, the utility will allow you to map a new key to any of the switches and modes.  If you want to restore the modes back to original settings, you can use the “Factory Setting” button in the utility or the hardware “Mode Reset” button in the back of the device.

Additionally, one could conceivably use the Firefly as an additional keyboard accessory.
In fact, just for fun, while typing up this review, I used the Firefly to scroll up and down the text window. This brings up a final switch to describe, the “repeat” switch. This toggles the Firefly to allow to repeatedly send the keypress signal while you keep the pedal depressed.

FINAL THOUGHTS

After using this electronic page turner for nearly a month, for my usage scenario, the PageFlip Firefly worked as advertised.  I didn’t experience any issues with reliability, connectivity, or operational inconsistency.  It has found a permanent place in my music bag.

Source: The sample for this review was supplied by PageFlip.  Please visit their site for further information and Amazon to order.

 

Product Information

Price: $109.95
Manufacturer: PageFlip
Retailer: Amazon
Pros:
  • Easy set up
  • Silent operation
  • Customizable mappings
Cons:
  • can not toggle off activity/connectivity light

Filed in categories: Reviews

Tagged:

PageFlip Firefly Bluetooth/USB page turner review originally appeared on on June 12, 2017 at 8:35 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

V-Moda will 3D print a Bluetooth speaker just for you


It’s no secret that V-Moda makes some interesting and great sounding headphones and earphones. Recently, they have stepped into the ultra-competitive portable Bluetooth speaker market. Of course, V-Moda can’t just make a speaker to fill out a product range. They have to make something they can be proud of. That pride has resulted in the REMIX—the company’s first portable Bluetooth speaker with 3D-printed customization options for every surface.

What does that mean? As the world’s first 3D-printed speaker, all six sides of REMIX can be personalized. Using V-MODA’s 3D-printing expertise, owners can add new sites, change the front grill or even replace the main housing for the ultimate in appearance. A range of materials is available: Lightweight matte fiber, gold-plating, 14-karat rose gold and even platinum. Val Kolton, V-MODA’s Founder and CEO says, “V-MODA has made it possible to “endorse yourself” rather than the manufacturer brand. This is the first product that is a ‘module’ with electronics and moving parts, and all surfaces can be chosen in 3D printed and standard materials … years of 3D printing for our over and in-ear headphones taught us how to build a powerful portable speaker and amplifier where all six sides can be personalized.” Prices for 3D printing options range from $40 to $370,000 (that’s not a typo) depending on materials.

The REMIX measures just over 8 in. wide and is designed to go anywhere. Powered by a glass-fiber diaphragm and long coil drivers, REMIX features a rear-mounted bass reflex port for a clearly defined sound that’s even powerful enough for monitoring duties during mobile recording and production. REMIX is also ideal for the home or the office. It includes a headphone amplifier in wired analog mode which is comparable to standalone headphone amplifiers with enough power to drive high-end headphones.

Bluetooth pairing is fast and simple. A full charge via USB-C gives ten hours of music playback. The built-in microphone can be used for online meetings, Skype calls or voice assistants like Apple’s Siri and Google Assistant.

Two Bluetooth sources can be connected simultaneously, such as a smartphone and laptop. An unlimited number of REMIX speakers can also be daisy-chained via cable for an even bigger sound. It connects wirelessly with Amazon’s Alexa and is also compatible with Google Chromecast Audio.

The V-Moda REMIX comes in Silver Aluminum or Black Vegan Leather and is available now for $299.99 US from V-Moda or Amazon.

Filed in categories: News

Tagged: ,

V-Moda will 3D print a Bluetooth speaker just for you originally appeared on on June 12, 2017 at 7:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Julie’s gadget diary – I am finally replacing my Nexus 6P


I’ve been using the same phone for a year and a half which is like a decade in Gadgeteer years. The phone I’ve been using is the Nexus 6P and for the most part, it’s been a rock solid performer. So much so, that even after trying other newer phones like the iPhone 7, Google Pixel XL, and Samsung Galaxy S8, that I haven’t wanted to switch. I guess I should say that it’s not that I don’t want a new phone, but it’s that I haven’t wanted to spend money on a new phone when my Nexus 6P is still working just fine. But I finally caved in last night and ordered a new phone without really spending any out of pocket money to do it. 

Yesterday morning Ryan from Colorado emailed me asking if I still had a Saddleback Leather bag that I had reviewed almost 10 years ago. I looked in my closet of unused bags and sure enough, it was still there along with another SB bag. Both bags were in pristine condition and he was happy to get a very good deal on the pair of them considering how much those same bags are selling for today on SB’s site.

I turned around later that night and ordered a new phone. Which one did I order? My choice was between a Google Pixel XL, Samsung Galaxy S8, or an LG G6. I decided to go with the LG G6 because it’s the least expensive of the three phones, has wireless charging and doesn’t have curved screen sides.

My first choice of the three was the Google Pixel XL but it is also the most expensive. My main reason that it was my first choice is that I’d get to run Android O (v8.0) as soon as it rolls out instead of having to wait for the phone manufacturer to roll it out. I also like that photos back up to Google at full resolution.

I decided to go with the LG G6 though because it’s the least expensive of the three phones, has wireless charging and doesn’t have curved screen sides which I don’t really care for.

I also decided to get the platinum version of the G6 instead of the black one just to be a little different and I plan to put a Dbrand skin on the back of the phone to protect it from scratches, so it doesn’t really matter what color it is.

I ordered an unlocked version of the LG G6 from B&H Photo where it’s currently selling for $549.99 with free shipping and no tax if you live outside NY, NJ. It arrives Wednesday. 🙂

If you want to buy an LG G6 at an even better price you can get one for $529.99 through Amazon. The only catch is that it’s the international version of the G6, so it doesn’t have a US warranty and it doesn’t have wireless charging.

Filed in categories: Articles

Tagged: ,

Julie’s gadget diary – I am finally replacing my Nexus 6P originally appeared on on June 11, 2017 at 3:48 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Trayvax Contour wallet review


I became a fan of Trayvax after reviewing their Summit minimalist wallet. It remains one of my all-time favorite wallets because it has a simple design, it’s well made, and it only holds the essentials. But if you’re looking for a minimalist wallet that has a little more pizzazz to its rugged good looks, you need look no further than the Trayvax Contour wallet. I shouldn’t give away the ending at the beginning of the review, but this wallet has no problems earning my stamp of approval. 

What is it?

The Trayvax Contour wallet is rugged minimalist expandable wallet made of stainless steel and leather that has been designed and made in the USA.

Design and features

As I mentioned above, the frame of the Trayvax Contour wallet is made of CNC machined stainless steel. But Trayvax didn’t stop there, they also added a Titanium aluminum nitride (TiAlN) coating which gives the wallet a really cool look.

The purpose of the frame is to keep everything aligned and to hold the leather strap which is sandwiched between the 2-piece frame.

The top-grain oil stained leather strap is available in a variety of colors and two sizes. I was sent the Canyon Red original sized strap preinstalled.

It’s easy to replace or adjust the strap by using the included Torx wrench.

The frame also has a built-in bottle cap lifter which some people might consider a survival tool.

To load the wallet, you simply “unsnap” the leather strap from the adjustable clasp pin and slide in the stack of cards.

Using the original leather strap, the wallet can hold up to 8 cards and 10 bills.
Using the extended leather strap the wallet can hold up to 13 cards and 10 bills.
As shipped, my sample wallet could hold 6 cards and still easily slide the top card out of the wallet. You don’t want to stuff too many cards in the Contour wallet or you’ll struggle to quickly remove a card when you need it.



The wallet’s open frame allows you to see the top card, making that spot perfect for an ID card.

Most minimalist wallets can only hold cards. But the Trayvax Contour wallet isn’t like most minimalist wallets. The leather strap unfolds to reveal a cash pocket that can hold up to 10 folded bills.


Friction from the raw side of the leather helps to hold the folded stack of bills in place even when the leather strap is unsecured.

This wallet obviously is not going to be as slim as some card only style wallets, but it still works well as a front pocket wallet.

Extra bonus

The Trayvax Contour’s stainless steel frame does more than just look good, it also provides a good level of RFID protection.

Final thoughts

I’ve yet to see a Trayvax wallet that isn’t well made and the Contour doesn’t change that. This wallet is expensive at $159.99, but it’s one of those things that you’ll only need to buy once. It’s not going to fall apart. It’s built to last for decades and it’s only going to look and work better as it ages.

Source: The sample for this review was provided by Trayvax. Please visit their site for more info and you can also check Amazon.

 

Product Information

Price: $159.99
Manufacturer: Trayvax
Retailer: Amazon
Pros:
  • Great looks
  • Easy to use
  • Expandable
  • Will last FOREVER
Cons:
  • Expensive

Filed in categories: Reviews

Tagged:

Trayvax Contour wallet review originally appeared on on June 11, 2017 at 9:30 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.