Home Reviews

FOLOMOV Tactical Flashlight 18650S review

REVIEW – Lots of folks have an “every day carry” (EDC) kit – things that they take with every day so they are prepared for whatever the day may throw at them.  For many, a flashlight is one of those things that go in the kit. The Folomov 18650S is a new contender for an EDC flashlight.  Is it worth your consideration?  Read on!

What is it?

The Folomov 18650S is a compact flashlight with 15 operational modes.  It carries an IPX8 rating, so it should be impervious to everyday water risks.  With its belt clip and wrist strap, it offers a variety of carrying methods.

What’s in the box?

First, I’ll address what’s ON the box.  Right at the bottom, it touts “High quality hard anadizing [sic]”. I think they meant “anodizing” and their proofreader needs to find another daytime gig.

  • 18650S flashlight with battery installed and belt clip attached
  • Wrist strap with feed tool attached
  • Two spare o-rings
  • USB-A to micro USB charging cable
  • Instruction guide

Hardware specs

  • Item Weight: 3.5 ounces including battery
  • Product Dimensions: 3.9 x 0.9 x 0.9 inches
  • Finish: Military gray hard anodized with positive grip texture
  • LED: Nichia 219D
  • Waterproofing: IPX8 rating – full submersion more than one meter
  • Light output: 0.5lm (lumen) to 960lm
  • Control: single button on tail

Design and features

The flashlight is a well-made, lightweight unit. With light output from 0.5lm all the way up to 960lm, it offers the user a wide variety of lighting options.  A multi-function tail cap button provides access to multiple functions: illumination mode (6 brightness levels), tactical mode, SOS, strobe, beacon, countdown, and lockout.

Setup

There really isn’t any required setup, other than attaching the optional wrist strap. But, Folomov added a really nice touch.

Attaching a wrist strap to most devices usually involves a lot of squinting, pinching, sometimes swearing, and frustration, trying to squeeze the strap into the incredibly small holes. Folomov solved that by attaching what essentially amounts to a very small cotter pin attached to the wrist strap.  This allowed me to easily thread the strap through the holes.  Very nice touch, Folomov!

So, after I attached the strap, I was all set up, or so I thought. I couldn’t get the flashlight to turn on.  I tried all the different button press combos that I will get into later, all to no avail.  I figured that the battery must have shipped dead, so I decided to charge it.  With an IPX8 rating, I guessed there would be a pretty beefy waterproof charge door.  I looked. And looked.  And looked.  I could not find a charge port anywhere.

Finally, I unscrewed the button end of the flashlight.  It was then I learned the following two things.

First, the flashlight shipped with a clear plastic disc covering the bottom of the battery, preventing the flashlight from being turned on during shipping.  That explains why I couldn’t get it to work.  No word about that in the instructions.

The second thing I learned was that the flashlight does not have a recharging port – the battery does.

I have never seen this before, but I guess it’s a thing. Since I had it all open, I elected to give the battery a full charge.

There are two LEDs on top of the battery itself.  The one to the right of the charge port glows red during charging.  Then, one to the left of the charge port glows green once the charge is complete.  Again, nothing in the instructions about any of this.

Performance

I took the flashlight out back at night to demonstrate the different lighting modes.

All photos were taken at f1.5, 0.3-second exposure, 400 ISO, to keep the photos consistent and show the relative difference in lighting. I took two photos at each lighting level, shining the light about 15 feet in front of me, and then at a magnolia tree about 40 feet away. For each mode, I will list the light output and the expected runtime with a full battery charge.

Lighting modes

The lowest mode is Moonlight mode. To access it, hold the button about 0.5 seconds.  The same to turn it off.

When in lighting mode, quick-pressing and releasing the button turns the light on to the last-used mode.  Repeated presses cycle up and down through the modes, lowest, low, medium, high and turbo. A 0.5-second press turns the light off again.

Moonlight mode (it didn’t light the tree enough to even show that photo)

  • 0.5lm
  • 350 hours

The light was visible at about 15 feet, but just a faint circle. Moonlight mode is essentially a night light.

Lowest mode

  • 10lm
  • 150 hours

The circle was clearly visible, and I could just make out the trunk of the tree.

Low mode

  • 50lm
  • 22 hours

This mode produced a bright circle and illuminated the area around it.  Shining at the tree illuminated branches.

Medium mode

  • 160lm
  • 10 hours

This mode provided good lighting in front of me, and could clearly illuminate the tree and its leaves.

High mode

  • 320lm
  • 4.5 hours

High mode illuminated the entire back yard and clearly lit the tree.

Turbo mode

  • 960lm
  • 4 hours

Turbo mode lit the back yard to a crazy bright level. When I shined it at the tree, it lit up the tree and the back yard.

One note – the LED end of the light has this symbol on it:

And it does get pretty warm.  I left the light on turbo mode for about ten minutes, and while it was pretty toasty, it didn’t feel dangerously hot, and the body of the light did a good job dissipating the heat.

Other modes

With the light off, a double-click of the button turns on strobe mode. The strobe flashes at the full 960lm brightness and is quite blinding.  This is a tactical mode and can be used to confuse an attacker.  When the strobe is flashing, a double-click flips to SOS mode, where the light pulses to produce an appropriate SOS emergency flash repeatedly.  Another double-click flips to beacon mode, where a 50lm light pulses every five seconds or so as an emergency locator.

Speaking of tactical…quick-clicking seven times toggles from lighting mode to tactical mode.  When you do that, the light flashes to confirm the change. When in tactical mode, the button can be held to for instant and temporary access to turbo mode.  When you release the button, it turns off.  A double-click turns on strobe mode. A long-press turns it back off again.  Seven more clicks flip back to lighting mode, again confirmed with a flash.

The light also supports a countdown timer. With the light on, three quick clicks enables a three-minute timer. The light flashes once to confirm. Once set, the light will turn off automatically at the end of the countdown. Once the timer is set, three more clicks add another three minutes.  You can do this for up to a 30-minute timer before the light automatically turns off.

Finally, with the light off, three quick clicks enables lockout mode, making it so the light cannot be turned on.  Three more quick clicks disables lockout mode, making the light usable again.

What I like

  • Well made and nicely finished
  • Excellent variety of lighting modes
  • Terrific light output for the size
  • Its design includes flat side area, preventing it from rolling away
  • Including the strap-threading tool is a really nice touch

What needs to be improved

  • The English instructions really need to be rewritten as they are a grammatic nightmare, and in some cases, just plain wrong or missing
  • Accessing the wide variety of modes through a single switch, via 1, 2, 3, or 7 clicks is a bit confusing

Final thoughts

In another nod to the proofreader needing to be let go, all the runtimes listed in the instructions showed “M”, not “H”, so if you believe the instructions, it will only run for four MINUTES on turbo. But in my testing, that is more of a typo than anything. The runtime specs on the box itself are correct, even though they differ from the same chart of runtimes in the instructions.

But, I can forgive typos and grammar if the product is good, and this product is good.  The wide variety of lighting levels make this a very flexible flashlight.  The tactical modes make it a good tool for personal protection or emergency use.  It’s light enough to carry every day but sturdy enough to stand up to rugged use.

With up to 960 lumens of blinding light, it’s a good deal at its price point.

Price: $27.65
Where to buy: Amazon
Source: The sample of this product was provided by Folomov.

Filed in categories: Reviews

Tagged:

FOLOMOV Tactical Flashlight 18650S review originally appeared on The Gadgeteer on April 22, 2019 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Lefant T700 Robotic Vacuum Cleaner review

REVIEW – The Lefant Robotic Vacuum Cleaner (T700 1800Pa) lives up to its claim as a super quiet cleaning system, with good suction and sensors.

What is it?

The Lefant T700 is a robotic vacuum and mop system.

What’s in the box?

  • Vacuum
  • Charger with homing port and cleaning brush
  • 2 mop pads
  • Extra filter
  • 2 extra brushes
  • Removable dust bin
  • Removable mop pan
  • Interchangeable suction/roll-style vacuum
  • Quick-start and troubleshooting guide
  • Remote control

Hardware specs

  • Product Dimensions: 12.6 x 12.6 x 3.2 inches
  • Item Weight: 6.17 pounds
  • Shipping Weight: 11.02 pounds
  • Batteries: 1 Lithium Polymer batteries required (included)

Design and features

Setup

Setup was very easy. The dust bin or mop tray pop right into place. You just need to charge it completely before the first use.

Similarly, it was quick and easy to pop open the dustbin to empty it. Or to change it to the roller-style vacuum attachment, which we only used for vacuuming carpet, and the suction-style attachment, which we used for tile and hardwood vacuuming, as well as mopping.

Performance

I despise vacuuming, and mopping is a close second. Our house is a tri-level, with a sunken sunroom, making for a fourth level. For me, traditional vacuuming involves moving a heavy canister model up and down lots of steps.

Since I was in a car accident 10 years, I suffer from back pain that’s often triggered by lugging the vacuum around and the vacuuming motion itself. I’ve been in the market for one of these for ages but always hesitant because of our multi-level home. Then again, we have white carpet and tile (not my choice) with two boys and a black dog. It was time to get a handle on my gross floors!

With the Lefant, I just carry it from floor to floor. At only 6 pounds, that’s really not a problem. Moving it wasn’t the hassle I anticipated.

We let it run until it ran out of batteries, which took nearly 2 hours on vacuum mode! Impressive.

For actual cleaning, my opinion gradually changed on this. At first, I was disappointed. However, in all fairness, my baseline was pretty low. Boys. Dog. A hate for vacuuming. Plus, knowing this was in the mail, I was admittedly slacking on housework, not that my house was a beacon of tidiness to begin with. I think if I would have done a big baseline clean first, with an old-school vac and mop, I would have been happier with the initial performance.

It took a few sessions to get my floors where I wanted them. And, of course, in this household, it’s a constantly moving target.

Now I’ve now set up a rotating schedule, where the Lefant hits at least one level of my house each day (with one round to vacuum and one round to mop in the kitchen and bathrooms). And I gotta admit, after seven days my floors are cleaner than ever. In fact, by comparison, my counters and windows are somehow looking dirtier!

Our house has a lot of weird ledges, and we were all set to create barricades. However, the sensors thoroughly impressed us, and worked almost every time! Now I just set up barricades between the carpet and hardwood, so that I don’t accidentally get my carpet mopped.

Note: Cardboard boxes might not be your best bet for barricades. I watched the Lefant bust right through one! It was the one and only time the sensor didn’t seem to work. Hand weights and cases of Gatorade worked a whole lot better as borders.

It did get caught in a few little spots: the carpeted top of our steps, the track of the sliding glass door, and under the lazy susan in our kitchen. So I’ve started blocking those off, so she doesn’t get stuck in an endless loop and burn out her batteries under the lazy susan.

She’s also extremely quiet. (Notice the female pronouns? We named her “Rosie.”) One morning, my son was finishing some homework over breakfast. He asked me to “turn it off” and I thought he meant the vacuum. He laughed and said, “No! The TV.” It’s true, you can barely hear the vacuum. Really, how often can you watch TV or talk on the phone and not even notice a vacuum running? Well, with the Lefant you can!

Programs

There are three choices for programs: spiral from the middle, start at the edges and work your way in, or press the power button for a basic back-and-forth pattern.

We didn’t have much use for the spiral or edge patterns. In fact, in our small square sunroom, we tried the spiral pattern and it basically cleaned a spot in the middle of the room and then decided it was done. The edge pattern left too much dog hair and dirt to be effective. But simply pressing the start button and letting it do its own thing, just a simple back and forth, worked by far the best.

App

We downloaded the app, which says it’s compatible with IOS and Android 4.0 or above. My son is the phone person in our family, and with his Android 7.0, he had trouble getting it to work. Even after deleting and redownloading it a few times, he kept getting the message: Sorry the program is abnormal and will be withdrawn. We’ll post an update if we get the app working.

What I like

  • Extremely quiet
  • Great sensors
  • Long battery life

What needs to be improved

  • App doesn’t work
  • More effective program mapping

Final thoughts

The Lefant Robotic Vacuum Cleaner (T700 1800Pa) may take a few sessions to clean the messiest of floors, but it’s very quiet and easy to use, has a long battery life and accurate sensors.

Price: $299.99
Where to buy: Amazon
Source: The sample of this product was provided by Lefant.

Filed in categories: Reviews

Tagged: , ,

Lefant T700 Robotic Vacuum Cleaner review originally appeared on The Gadgeteer on April 22, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Origem HS-3 HDR Bluetooth Smart earphones review

REVIEW – The world of Bluetooth headphones/headsets/earphones is wide and varied, and grows every day.  Every shape and size conceivable is out there, to fit every lifestyle and circumstance.  I myself own just about every kind you can imagine… wireless earbuds, wired earbuds, over the ears, in the ears, around the back of the head, waterproof, not waterproof, and on and on.  Just about every pair I have ever owned has something that I like and something that I don’t like.  Enter the $99 Origem HS-3 HDR Bluetooth Smart earphones, fresh off a Kickstarter campaign.  It has some nice features that are worth considering, and 1 feature that is a game changer.  Let’s find out what it is!

What is it?

Bluetooth earphones that provide an over-the-ear fit, 6 hours of playtime, IPX5 waterproof ability, and built-in voice control.

What’s in the box?

  • A padded zipper case to hold everything.
  • A Micro-USB cable for charging
  • Extra sets of earbuds to fit any size ear
  • The Origem HS-3 HDR Bluetooth earphones

Here are the specs from the manufacturer:

  • They are rated “IPX5 waterproof”, for intense exercise and bad weather, but can’t be submerged in water.
  • They have built-in fast charging and can be charged in 30 minutes to provide 6 hours of listening time.
  • They come with multiple sized earbuds to fit most ears.
  • Each ear piece has hinged earhooks to provide a secure fit.
  • It comes with Bluetooth 5.0
  • HDR (high dynamic range) algorithm detects the sound pressure of the listening environment and volume of the sound to dynamically adjust loudness for all different frequency levels.
  • Built-in voice recognition provides no-hands control of the music and voice calls.
  • In-line controls provide physical touch controls.

Design and features

As mentioned in the specs above, there are some features that you might come to expect from a $99 headset.  IPX5 will allow you to have a heavy workout, in the rain, and keep on ticking.  6 hours of playtime, coupled with a 30 minute charge time, will keep you happy almost all day.  Multiple sized earbuds will mean every sized ear should be happy.  And an in-line physical button control is what most Bluetooth earphones have these days.

But now for the big differences.  The design of a hinged hook that goes over the top of your ear and rests snuggly behind it means that these earphones will never fall out, no matter what you are doing.  I have always hated those earbuds that you have to basically suction into your ears to keep them from falling out.  They always fall out.  But the Origem HS-3s will not.  No amount of running, rolling, jumping, shaking, etc, is going to dislodge these.  And honestly, after a short time you forget you have them on.  As you can see by the pictures, the wire that goes behind your ear has a cushioned covering on it to make for an even more comfortable fit.  Unfortunately, one of my earphones lost that cushioned covering at some point, and I never noticed it.  I still have no idea what happened because they are either on my ears or in the zippered case.  But anyway, even without the cushioned covering for my left earphone, I still think they are comfortable.

The second feature worth mentioning is the HDR sound.  I have come to expect crappy/so-so sound from most earphones/earbuds.  But I do think that the HDR feature actually works.  The sound I get through these earphones is very full.  I can hear very good highs and mid-tones.  You won’t get a very deep, rich, bass sound, but it isn’t bad at all.  I would call the sound just ‘very full’.  I can say that apart from my collection of more expensive headphones that have big cushions that completely cover my ears, these are the best earphones that I own, hands down.

Finally, the feature that is a game changer, in my opinion, is the built-in voice control, which is a feature I don’t have on any other headset/earphones that I own.  When a phone call is coming in you can simply say “Answer call” or “Reject call” and your phone responds accordingly.  When music is playing you can simply say “Play music” or “Pause Music” or “Next song” or “Previous song”, without ever touching the in-line physical controls.  You can even say “Hello VoiceQ” and your phone’s assistant (Google or Siri) will come to attention and provide you all the voice control features that those services provide.  And it works flawlessly every time I use it.

Now, before you object and say “But Steve, my Plantronics headset can do that!”, let me tell you more.  I used to own that Plantronics headset and used it daily before it died.  And yes, I could use hands-free voice controls through it as well, and answer and reject calls as well.  But here is the difference.  My Android phone’s screen has to be on before my phone will respond to direct voice commands to do something.  You know… “Hey Google”.  With the Origem HS-3 my phone can be sitting there with the screen completely off and I can tell the Origem “Hello VoiceQ” and it will awaken my phone so that it is ready to accept whatever voice command I give it. And it is over Bluetooth, which means I don’t have to be sitting right beside my phone to do it either.  I can be across the room.  I am telling you, this is a feature that other headsets are going to want to incorporate into their products because it makes life easier.  I have used it to initiate phone calls, start my music, set calendar items, ask for a ballgame score, ask about the weather, and many more things.

What I like

  • Great comfortable, stay-put, fit
  • Great overall sound quality
  • Amazing voice controls
  • Great price for the value you get

What needs to be improved

  • The zippered pouch is a little too cramped
  • The cushion on the wire that goes behind the ear needs to be more securely fashioned.  It can slide off too easily.

Final thoughts

The price of $99 for these earphones is well worth the price.  My dislikes are petty as well.  I wish the zipper cushioned case was slightly bigger because putting the HS-3s into the case is a bit cramped, and it takes a hot minute to unscramble the wires when you take them out.  I also wish the cushioned covering on the wire behind the ear was a bit tighter, which could have prevented me from letting one of them slip off undetected.  But those are minor squabbles.  I highly recommend these for the person who wants great sounding, great fitting, and highly useful earphones.

Price: $99.00
Where to buy: Origem.com or Amazon.
Source: The sample of this product was provided by Origem.

Filed in categories: Reviews

Tagged:

Origem HS-3 HDR Bluetooth Smart earphones review originally appeared on The Gadgeteer on April 21, 2019 at 2:30 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

KLIP: Titanium Pocket Knife + EDC Suspension Hook review

REVIEW – I have a soft spot for gadgets that are multi-functional.  Any gadget that can perform multiple tasks helps me cut down on the number of EDC items I need to carry.  That’s what piqued my interest about the Dapper Design KLIP.  Let’s have a look!

What is it?

Made from lightweight Titanium, KLIP is a combination knife + pocket clip that is designed to suspend your keys or other items from your pocket while also giving you quick access to a small knife.  In fact, its very name, “KLIP,” is derived from a combination of the words “knife” and “clip.”

What’s in the box?

The KLIP comes in some very classy-looking packaging: a tin with top and bottom halves, and a clear window in the top half that allows the actual product to be seen, at least partially. I always appreciate when companies provide packing like this that.


Inside the package itself are the following items:

  • KLIP
  • Silver twist-lock flexible steel cable ring
  • Black coated twist-lock flexible steel cable ring

Hardware specs

  • Main body: Stonewashed Grade 5 titanium
  • Blade: 440C steel blade
  • Smooth spring-loaded detent ball mechanism (provides satisfying “click” on blade open/close)
  • Adjustable pivot screw
  • Opened length: 85mm / 3.34″
  • Closed length: 60mm / 2.36″
  • Blade length: 27mm / 1.06″
  • Height: 16.25mm / 0.63″
  • Thickness: 8.15mm / 0.32″
  • Weight: 16 grams / 0.56 ounces

Design and features

I love combo items—items that can serve multiple functions.  The KLIP can be your key holder and you can hang them down into your pocket, or from your belt, or even from backpack webbing.  Plus, there’s a little knife hidden in there, in case you need to open a box, etc.  The KLIP is machined from durable, lightweight, stonewashed Grade 5 Titanium and it sports a super-sharp 440C steel blade which locks into position with a “click.”  Its deployment mechanism also features a ball detent and adjustable pivot screw.  KLIP has a lot packed into a small, functional package.

My initial impression of KLIP was that it was small, lightweight, and unobtrusive-looking.  In essence, it’s a relatively minimalistic-looking metal hook with a mechanism at the end.  Its body is made from “Grade 5” Titanium, so it is in fact very lightweight and very durable and should last a long time.  I also think the surface treatment, a light “stonewash” that results in a matte, slightly irregular appearance, is quite attractive.

KLIP has a slim profile, as seen in the above pics, which helps it stay small and easily carried.

Further, in the photo above, you can see the hook, which is an open end that is about 4mm wide.  Overall, the hook has a sort of a “goose neck” shape.

One of the aspects that I very much appreciate in product design is logo minimalism.  Dapper Design has done well with this—their simple, overlapping “D” logo is imprinted into the surface of KLIP, in what appears to be a laser-etching process, and if that is the case, then this logo should never wear off.

KLIP is small, as you can see from the photo above, which makes it quite easy to have on hand just about any time, should the need arise for a small knife.

Besides the hook, which forms the main body of KLIP, its other main feature is the small knife concealed in its body, as seen in the images above.

KLIP utilizes a cam-shaped component that secures a spring-actuated ball detent mechanism that helps secure (but not lock)  the blade in both its folded and extended positions.  It essentially provides a  satisfying “click” sound and feel upon blade opening or closing.   Also, note that the blade has a small channel cut into either side the allows the user to get a fingernail into it to help open the blade.

KLIP utilizes a cam-shaped component that secures a spring-actuated ball detent mechanism that helps secure (but not lock)  the blade in both its folded and extended positions.  It essentially provides a  satisfying “click” sound and feel on blade open/close. In the photo above, you can see that there is a small screw with a tiny slot on one side of the cam-shaped component.  What is its purpose?  Read on to find out.

A small, flat head screwdriver (not included with KLIP) will fit into the slot and this allows KLIP’s detent mechanism to be loosened or tightened, which determines the amount of force required to snap the blade into an extended or folded position.  In fact, out the box, this small screw it tightened down such that the blade cannot be opened without the screw being loosened to some degree, which effectively “unlocks” the detent mechanics.

 

In the photo above, you can see the pocket into which KLIP’s blade fits when folded.

 

The blade itself is relatively small—you aren’t going to field dress an antelope with it, but it is a perfect size for cutting open boxes, cutting a loose thread, slicing open an envelope, or any number of light-duty, everyday tasks for which you might need a small knife blade.

The base of the blade is quite thick relative to the tip of the blade, which tapers to a sharp point in two planes, as seen in the views above.  This makes it excellent for piercing into things if necessary, and, though I didn’t have an opportunity to test this, it seems that a tip as pointed and sharp as this would be very useful for digging out splinters.

In the first week along that I carried KLIP as part of my EDC gear, I found myself using it daily.  I used it to cut through the tape on several boxes and also break down several others at work and to open mail envelopes at home.  KLIP’s blade opens easily and snaps in place thanks to the detent mechanism, and it is just the right length to hold for most quick jobs.

The only accessories that were included with KLIP were a pair of twist-lock flexible steel cable rings, one with a black coating, the other uncoated.  While KLIP could certainly be attached to a standard keyring, these cables are a quick and easy way to attach KLIP to a set of keys, as seen above.

I evaluated a few different methods of carrying KLIP.  It excels when it is attached to a set of keys and carried such that it “hangs” inside your pocket, with KLIP hooked over the edge of your pocket and the keys hanging down inside your pocket, as shown in the phots above.

Alternatively, I tried hanging KLIP on the outside of my pocket, see above left, which was not nearly as secure as allowing the keys to hang inside the pocket.  And finally, I also hung KLIP’s hook over my belt, as see in the photo in the above right.  This is slightly more secure than the method shown in the photo in the above left, but still made me a bit nervous that KLIP—and my keys—-were going to get knocked off by something.

One last thought on KLIP: I am very tempted to put it on my keyring with the idea to leave it there indefinitely because it is just that unobtrusive and I think I would find uses for it nearly every day.  The only thing stopping me is that I suspect that KLIP is so unobtrusive that I myself would forget that it is on my keyring, and I’d forget to remove the next time I took an airline flight, and it would be confiscated by TSA.  Which would be a major bummer.

What I like

  • Small, compact, lightweight
  • Looks nice with matte Titanium finish
  • Includes two twist-lock flexible steel cable ring

What needs to be improved

  • The blade does not technically lock in either the extended or folded positions

Final thoughts

I really like KLIP.  Elegantly machined from Titanium alloy and with an attractive style and finish, it is durable, and its design is both aesthetically pleasing as well as useful: it combines a suspension/keychain hook and a small knife, which makes it a perfect item to add to your EDC gear for when you need quick access to a small knife for small tasks.  While KLIP had it’s very successful debut as a crowdfunded Kickstarter campaign (see here for more info), it is now available for pre-order from Dapper Design (see links below).

Price: $49.00
Where to buy:  dapperdesign.com
Source: The sample of this product was provided by Dapper Design.

Filed in categories: Reviews

Tagged: ,

KLIP: Titanium Pocket Knife + EDC Suspension Hook review originally appeared on The Gadgeteer on April 21, 2019 at 9:30 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Landscape Pro Studio Max 3 photo editing software review

REVIEW – When taking outdoor pictures, you are generally limited to several conditions such as the weather, the lighting, and even the environment itself. You might have your camera and tripod ready but the conditions can become unfavorable. Sometimes, it’s like mother nature just isn’t co-operating when you want to take those landscape pictures. With Landscape Pro Studio Max 3, now you can tweak your landscape photos to compliment or help fix your image to really make them stand out.

What is it?

Landscape Pro Studio Max 3 is a creative editing software for photographers of any level to help enhance and process their landscape photos.

Installation Requirements

  • 1GHz processor or faster recommended.
  • 2GB RAM minimum recommended.
  • Windows 10, Windows 8, Windows 7, Vista or macOS (10.7 or later)

Design and features

What Landscape Pro from Antropics Technology can do for you is help spice up the landscape pictures you take and make them more dramatic by adjusting specific areas in your pictures such as the sky, grass, ground, mountain, water, and more. This software allows you to individually manipulate and fix the selected areas and helps give them a little punch to brighten, sharpen, or add color. Landscape Pro can also straighten images as well as add watermarks and it can also add realistic atmosphere like fog or rain. There is also a feature to remove unwanted objects in your photo, as well. I am very impressed with what this software can do.

If you are not familiar with Anthropics Technology, they are the makers of Portrait Pro which is a powerful editing software for portrait photography. I had a trial of an earlier version of Portrait Pro a few years ago and although it had a few small bugs,  it is very impressive, to say the least. So, it is only natural that Landscape Pro is just as intuitive as Portrait Pro and just as impressive.

Landscape Pro uses advanced image recognition technology to target certain areas that you select on your image. In conjunction with the image recognition, Landscape Pro has many included Presets for the selected areas along with a slider interface to make adjustments and fine tune the areas. It’s all very responsive when making the adjustments and the results are instant. One of the popular features is the Sky replacement with 150 built-in Preset skies to choose from. Believe me when I tell you that there are plenty of skies to select such as clear and cool cloudless skies to dark and dramatic cloud-filled skies. You even have the option to import your own sky picture, too.

To begin editing, you just drag Labels onto specific areas of your image. For example, if you want to change the look of the sky in your image, then you would drag the Sky Label onto an area of the sky in your picture. If you want to adjust the water in your image, then you would drag the Water Label onto the water area in your picture. Want to edit the trees in your picture? Just drag the Tree Label to a tree. Drag the Mountain Label to a mountain in your picture, and so-on and so-forth. There are plenty of Labels for areas in your picture that you can use.

As soon as you are finished labeling the selected areas that you want to edit, then the real fun beings. Whether you choose the Presets or just go straight to manually adjusting your image using the Sliders in the Side Panel. Keep in mind that you will eventually be using the Sliders in the bulk of your edits to fine tune your image. The Side Panel is where all the options to edit your image are grouped. The one-click Presets get you started with a certain look in the areas you selected and then you can go in with the Sliders to tweak the Presets you selected.

Landscape Pro does a great job of reading the elements in your photo like the sky, water, sand, trees, people, etc. to help analyze the scene. And not only can Landscape Pro adjust isolated areas in your photo but it can change the overall mood and feel of the entire image. One of the main features that Landscape Pro has is its Lighting feature. What it does is analyze your picture’s scene and the elements within your photo so that it can make the proper natural 3D adjustments to the lighting as it would be in real life. So, as you move the light source in the picture, the corresponding highlights and shadows move when you adjust the light source. This can add some really nice dynamics to the overall look, mood, and feel of your photo.

Depending on how much editing you want to do to your picture is up to you. You can use Landscape Pro to just tweak a little bit to enhance your photo or you can go overboard and totally change your entire image to make it look like a fantasy dream world. It’s all up to you and what you want to create.

Landscape Pro can be either used as a stand-alone program or as a plug-in filter in Photoshop or Lightroom. I prefer using Landscape Pro as a standalone program because when I used it as a Photoshop plug-in filter the export seems to take a fairly long time for the edits to render out. Whereas, when I use it as a standalone, the export was significantly faster. However, keep in mind that unlike some third party plugin exports, Landscape Pro’s edits don’t show up in a separate layer. The edits were applied directly to my original image. If you are like me and prefer to do non-destructive editing in Photoshop, then it’s probably best to make a copy of the original image and use that one to edit with Landscape Pro. It’s just good practice to never edit the original image.

I noticed that when I used Landscape Pro as a plug-in that the rendering from the Save and Close option is super slow versus if I just did the editing inside Landscape Pro as a standalone program.  When I used Landscape Pro as a standalone program, there was virtually no render time like there was when I use it inside Photoshop. Now, keep in mind that there may be factors on your computer such as RAM, processor, graphics card, etc that may affect the render speed. However, as far as I know, it just may be something in Photoshop that may be the culprit because everything was working just fine except the render speed after I clicked “Save and Close” in Landscape Pro. It literally takes two to three minutes to see the filter applied to my image. Now, the processor on my computer is an Intel i5 2.70 GHz with 8 gigs of RAM and my Dell All-In-One computer may not be the fastest out there but in no way is it slow.  I normally can edit all day with Photoshop and Capture One and never experience any lag.

There are two other versions of Landscape Pro: the Standard and the Studio. Below is a chart that compares the two versions to the Studio Max.

Installation

Installation was very easy. I just downloaded the software from the Landscape Pro website, installed the software and then input the token (activation code/license) that I received. Software installed without any problems. Landscape Pro Studios max 3 is available for both Mac and PC.

What I like

  • Very responsive and fast edits.
  • Numerous Presets to incorporate into your photos.
  • Instant preview inside the Sections of the Side Panels.
  • High Resolution Output Images
  • Works with RAW and DNG formats.
  • Can be used as stand-alone or a plug-in.
  • Video tutorials available on the Home page.

What needs to be improved

  • Couldn’t find a setting to turn off the Help dialog box which pops up when you are in the Side Panel area.
  • Smaller detailed areas are difficult to select and edit.
  • Filter rendering in Photoshop was very slow.

Final thoughts

As someone who takes plenty of landscape photos, whether traveling on vacations, road trips, and even in my hometown, I always want to take the best photos I can right out of the camera. But sometimes I can look at an image I took and decide that I wish it had a little more to it; maybe a little more pop to the picture. Whether I want the image to somehow jump right out into the viewers face or if I just feel like the image needs some tweaking, I found that using Landscape Pro Studio Max 3 is a great tool for enhancing my landscape photos. Using this software was fairly quick and easy. Plus, I really liked seeing the different modifications of my images inside the program so I can make choices right on the fly. I know I will be using this software now and in the future for many of my photos.  Not only will I be editing some of my older landscape photos but I can’t wait to get out there and take more landscape photos. I definitely know that I will have more landscape photos to print and hang on my walls after a little tweaking from Landscape Pro.

Price: $119.95
Where to buy: Landscape Pro Website
Source: The sample of this product was provided by Anthropics Technology.

Filed in categories: Reviews

Tagged:

Landscape Pro Studio Max 3 photo editing software review originally appeared on The Gadgeteer on April 21, 2019 at 8:20 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.