ddpai X2 Pro dual channel dashcam review

Is it wrong every time I receive a new dashcam to review I hope and pray for something crazy/insane to happen in front of me while driving? I firmly believe in the benefits of dashcams and recording the world zipping by while motoring down the road. You never know when something bad is going to happen; when it is your word vs the person who hit you and a picture or in this case video proof could be priceless. For this review I’ll be looking at the X2 Pro, ddpai’s latest and most ambiguous dashcam to date, packed full of high-tech features and is the first duel channel dashcam I have ever tried.

The ddpai X2 Pro features dual cameras/channels enabling one camera facing forward through the front windscreen and one pointed behind. In addition to featuring dual cameras, the X2 Pro is a high resolution, GPS/WiFi enabled, social media capable dashcam. I really like the X2 Pro’s form factor…preferring screen-less dashcams, finding them less distracting or intrusive.

Package Contents:

  • ddpai X2 Pro dashcam
  • xX2 Pro rear dashcam
  • Connection/extension wire for rear dashcam
  • microUSB 12v power cord
  • Remote Snapshot button
  • 32gb microSD card
  • Spare 3M adhesive pads and wire stays
  • Wire shim tool

Specifications:

  • HUAWEI HiSilicon processor; Format H.264 HD video coding
  • OmniVision Image Sensor
  • 6-class glass lens and 1 infrared filter with zero distortion; Front cam – 140°wide angel & F1.8 aperture; Rear cam – 120°wide angel & F2.2 aperture
  • Front cam – 2592×1520P image; Rear cam – 1440×896P image;
  • Digital image stabilization
  • New generation GPS system; High speed positioning
  • 3 axis acceleration sensor
  • High sensitivity microphone; high power loudspeaker (1w)
  • Front cam – 12V@1A~2.1A; Rear cam – 5V@1A~2.1A
  • Built-in super capacitor allows video shooting when electricity is turn off

The top of the X2 Pro dashcam has its mounting hard point which allows for easy installation and removal of the device. The bottom of the X2 has a speaker, microphone, and convenient LED-lit mute button. Even though I installed the X2 Pro in my truck, I find being able to quickly unplug and remove any device a convenient/important security feature so I can lock it in my glovebox vs closing the top of my convertible or if I’m in the wrong part of town.

The front facing camera takes a very respectable 2592 x 1520 resolution for still images and 2560 x 1440 for videos. The front camera has a 6-class glass lens with a 140° wide viewing angle & F1.8 aperture.  The X2 uses an OmniVision Image Sensor that provides “excellent video monitoring performance under low light & WDR”. The front camera is able to be rotated for best line of sight based on the angle of your car’s windshield.

The smaller rear camera’s resolution is 1280 x 720 for both still images and video. Like the front camera, the rear also has a 6-class glass lens but a more narrow 120° wide viewing angle & F2.2 aperture. It can rotate in its mount as well.

The back of the X2 Pro has one microUSB port for power and a port for connecting the rear camera. There is also an indicator LED on the far side. I did find it interesting the camera would not work with my Macgyver’d USB power outlet I mounted behind my rearview mirror or any other microUSB cable I tried. My best guess why neither worked is that the X2 Pro is more power hungry due to the built-in GPS, capacitor, rear camera, etc.

The right side of the dashcam has the microSD card slot. The X2 Pro is compatible with up to 128gb class 10 microSD cards. The left side has a speaker that is loud enough to hear 99% of the time. The X2 Pro has built-in NAND flash memory (D2 Save technology), that acts as a backup should your microSD card fail.

The windshield mount installed as you would expect, quick and easy. ddpai includes an adhesive mount but no suction cup option. There is little to no movement or shaking/vibration in the video when driving on a smooth roadway. Though the X2 Pro has digital image stabilization for bumpy roads.

The rear camera is small and does not interfere with your view. Running the wires to the back of your vehicle may take a bit of trial and error but overall it is a simple enough project depending on the interior of your car. I’m pretty AR and I was relatively pleased with my efforts. Total setup time was less than an hour.

As I mentioned above, the X2 Pro needs the dual USB charger (Front cam 12V@1A / 12V@2.1A; Rear cam5V@1A / 5V@2.1A) ddpai includes in the package. The X2 has IPS (Intelligent Protection System) technology that protects vehicles against extremely low voltage and intense heat by cutting off the power to the dashcam automatically. The X2 Pro has a built-in “super capacitor” that holds a charge and enables it to function in Parking Mode video capture that records even when electricity is turned off.

ddpai also includes a wireless, one-click physical button that when pushed captures a still image and automatically downloads it to your smartphone. It attaches nearly anywhere in your vehicle with a double sided sticky pad. The button is a surprisingly convenient and useful.

The internal GPS acquires the satellites fast enough. It’s not the quickest dashcam in this respect but not the slowest either. The GPS tracks not only location but calculates speed as well. The X2 Pro also has a built-in G-sensor to monitor your acceleration in three-dimensional space and collisions, that will lockdown that video/moment for future review.

Since the X2 Pro does not have a screen, setting up the camera, viewing live video & driving telemetry, watching past recordings, and downloading pictures and video is all done via your smartphone. The X2 Pro is the most complex and capable dashcam I have ever used. It is definitely not a plug & play, beginners dashcam setup by any stretch of the imagination. It’s smartphone control and management app is complicated and does take a bit of time to get used to. It also takes time to understand all the features of the X2 that you can tweak and/or manage via app as well.

The ddpai X2 Pro supports photos, videos, and driving stories sharing via the app linked to multiple social networks (Facebook, Twitter, Instagram, Youtube and etc.).

The I mentioned above, your connection to the X2 Pro is 100% via your smart device. The interface is well designed and thought out. It provides you not only 2k front facing video but a PIP with the rear view/video plus: date, time, speed, temp, power (I believe), G-forces, compass direction, GPS connection, elevation, time and distance traveled. The vertical orientation of the app also adds a map with your location superimposed on it. Though you have to toggle between two screens to get all the telemetry.

It is a shame you do not get all of this data and rear view PIP captured in the video you download from the dashcam. Worse yet, ddpai has not created any desktop software to view all of your driving perimeters holistically from the microSD card.

The X2 Pro records video in H.264 / .mp4 format in 5-minute segments. When the microSD card is full, the dashcam continuously overwrites the oldest video with new. You can tweak the video resolution, various video, and card management settings via the ddpai smartphone app.

Daytime Video:

The 2K video is very clear with more detail than the standard 1080p resolution that a majority of dashcams record at. The 140-degree viewing angle has nearly no fish-eye effect towards the edges. The camera does a great job blocking out glare.

Skipping Video:

Occasionally the video would record with hiccups/skips happening every few seconds for no apparent reason.

In addition to skipping, I did have my fair share of other issues with the X2 Pro as well.

These included:

  • The dashcam occasionally failed to begin recording when I started my vehicle, often never turning on until I unplugged it for a few seconds then reinserting the power plug.
  • When in parking surveillance mode, it occasionally didn’t record or did but in normal time for the whole duration (aka hours). It does have a smart shutdown mode when power is low, but this happened right after driving long distances.
  • Occasionally after sitting in a cool garage all night, it immediately shuts down due to overheating and doesn’t start back up again until I reset the power. Sometimes continuing to shut down over and over again.
  • The rear facing camera does not work every now and then. Turning the X2 Pro on & off occasionally fixes the connections other times not.

I worked with ddpai and some of the issues were fixed with a firmware update. Though I am still working thru many lingering sporadic glitches.

I really wanted to like the ddpai X2 Pro, its screen-less form factor and a long list of high-end features definitely appeal to me. But its poor performance and sporadic reliability are more frustrating than anything…never knowing when it will operate as advertised. Sadly the X2 feels like a beta product still in development. Bottom line — I plan on uninstalling it ASAP and replace it with a more dependable dashcam.

Source:  The sample for this review was provided by ddpai. Please visit their site for more information and Amazon to order.

 

Product Information

Price: $299.00
Manufacturer: ddpai
Retailer: Amazon
Pros:
  • Great form factor
  • Built-in GPS and G-sensor
  • Front and rear cameras
  • 2k video capture
  • Zero fisheye effect
  • Well designed smartdevice app
  • Social media connectivity
Cons:
  • Sporadic/glitchy performance
  • Poor reliability
  • Fails to turn on after vehicle start
  • Shutdown for no reason

Filed in categories: Reviews

Tagged: ,

ddpai X2 Pro dual channel dashcam review originally appeared on on July 11, 2017 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

SnapPower SwitchLight review

I love products that are simply designed, simply packaged, and easily installed. Products from SnapPower tick all three of those boxes. Three years ago I reviewed their GuideLights outlet covers plates which I still use today and today I’m going to show you their newer SwitchLight covers.

What is it?

The SnapPower SwitchLight is a cover that turns your ordinary switch light cover into a night light without any special wiring, batteries or a complicated installation.

What’s in the package?

SnapPower SwitchLight
Instructions

Design and features

SnapPower SwitchLights are available in two styles that include the Toggle style and a Decor style. They also come in white, light almond, and ivory colors. I was sent a Toggle style in white.

The SwitchLight looks like an ordinary switch light cover until you look closely. Then you’ll notice the small switch / ambient light sensor in the lower left corner and a row of LEDs along the bottom edge of the cover.

When you flip the SwitchLight over, you’ll see two tabs with electrical contacts on the end. These expertly designed tabs make installation literally a snap.

Installation

Installing the SnapPower SwitchLight will take you less than 5 minutes. All you will need is a light switch in a room that has a light fixture that is controlled by just one switch. You’ll also need a flat head screwdriver, a flashlight, and you’ll need to know where your electrical panel is located.

Step 1. Turn off the power to the light fixture by flipping one of the switches in your breaker box / electrical panel.

Step 2: remove the existing switch cover.

When I did this, part of the paint and drywall chipped off and I was immediately dreading the annoyed looks that I knew I would be getting from Jeanne as soon as she noticed that I damaged the wall.

Step 3: Notice the screws on the side of the switch. The tabs on the SwitchLight press against these screws to power the built-in LEDs. Genius right?

Step 4: Snap the SwitchLight in place.

Step 5: Tighten the screws.

Step 6: Turn the power back on.

That’s it!

I was overjoyed that the SnapPower SwitchLight plate is slightly longer than the original switch light cover. The extra length hides the chipped paint. Crisis averted!

It’s time to try it out!


Turn off the light and make sure the switch in the lower left corner is set to low or high brightness instead of off. Then as the room gets darker, the LED lights along the bottom edge of the SwitchLight cover will start to glow. The LEDs turn off as the room gets brighter. Simple!

However, I did notice something strange with the SwitchLight cover. If I have the switch set to bright and turn off the overhead light fixture by toggling the switch where the SwitchLight is installed, the LED bulbs in the fixture will still glow dimly. The image above makes the bulbs appear brighter than they are in real life. If I move the switch to the lower brightness setting, this doesn’t happen.

Final thoughts

I think the SnapPower SwitchLight is a great way to add ambient night lights to a room, hallway, etc., without complicated wiring or electrical know-how. Installation is incredibly fast and easy. The LEDs in the SwitchLights should last for 25 years and will only cost about 10 cents a year to power. You can’t beat that!

Source: The sample for this review was provided by SnapPower. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $17.00
Manufacturer: SnapPower
Retailer: Amazon
Pros:
  • Fast and easy to install
  • Simple "night light" without batteries or wiring
  • 3 light settings
Cons:
  • High setting causes LED bulbs in ceiling fixture to continue glowing (dimly)

Filed in categories: Reviews

Tagged:

SnapPower SwitchLight review originally appeared on on July 10, 2017 at 5:25 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

SnapPower SwitchLight review

I love products that are simply designed, simply packaged, and easily installed. Products from SnapPower tick all three of those boxes. Three years ago I reviewed their GuideLights outlet covers plates which I still use today and today I’m going to show you their newer SwitchLight covers.

What is it?

The SnapPower SwitchLight is a cover that turns your ordinary switch light cover into a night light without any special wiring, batteries or a complicated installation.

What’s in the package?

SnapPower SwitchLight
Instructions

Design and features

SnapPower SwitchLights are available in two styles that include the Toggle style and a Decor style. They also come in white, light almond, and ivory colors. I was sent a Toggle style in white.

The SwitchLight looks like an ordinary switch light cover until you look closely. Then you’ll notice the small switch / ambient light sensor in the lower left corner and a row of LEDs along the bottom edge of the cover.

When you flip the SwitchLight over, you’ll see two tabs with electrical contacts on the end. These expertly designed tabs make installation literally a snap.

Installation

Installing the SnapPower SwitchLight will take you less than 5 minutes. All you will need is a light switch in a room that has a light fixture that is controlled by just one switch. You’ll also need a flat head screwdriver, a flashlight, and you’ll need to know where your electrical panel is located.

Step 1. Turn off the power to the light fixture by flipping one of the switches in your breaker box / electrical panel.

Step 2: remove the existing switch cover.

When I did this, part of the paint and drywall chipped off and I was immediately dreading the annoyed looks that I knew I would be getting from Jeanne as soon as she noticed that I damaged the wall.

Step 3: Notice the screws on the side of the switch. The tabs on the SwitchLight press against these screws to power the built-in LEDs. Genius right?

Step 4: Snap the SwitchLight in place.

Step 5: Tighten the screws.

Step 6: Turn the power back on.

That’s it!

I was overjoyed that the SnapPower SwitchLight plate is slightly longer than the original switch light cover. The extra length hides the chipped paint. Crisis averted!

It’s time to try it out!


Turn off the light and make sure the switch in the lower left corner is set to low or high brightness instead of off. Then as the room gets darker, the LED lights along the bottom edge of the SwitchLight cover will start to glow. The LEDs turn off as the room gets brighter. Simple!

However, I did notice something strange with the SwitchLight cover. If I have the switch set to bright and turn off the overhead light fixture by toggling the switch where the SwitchLight is installed, the LED bulbs in the fixture will still glow dimly. The image above makes the bulbs appear brighter than they are in real life. If I move the switch to the lower brightness setting, this doesn’t happen.

Final thoughts

I think the SnapPower SwitchLight is a great way to add ambient night lights to a room, hallway, etc., without complicated wiring or electrical know-how. Installation is incredibly fast and easy. The LEDs in the SwitchLights should last for 25 years and will only cost about 10 cents a year to power. You can’t beat that!

Source: The sample for this review was provided by SnapPower. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $17.00
Manufacturer: SnapPower
Retailer: Amazon
Pros:
  • Fast and easy to install
  • Simple "night light" without batteries or wiring
  • 3 light settings
Cons:
  • High setting causes LED bulbs in ceiling fixture to continue glowing (dimly)

Filed in categories: Reviews

Tagged:

SnapPower SwitchLight review originally appeared on on July 10, 2017 at 5:25 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

SZNS Burnt Sienna wallet review


The popularity of minimalist wallets is driving innovation in this field, providing the people with what they have been craving – the downsizing of the traditional men’s and women’s wallets of the past. I’ll admit that I’m one of those people who has been craving a smaller wallet. This time I’m reviewing the SZNS (pronounced “seasons”) Burnt Sienna wallet. Thus far, I’ve found that it is an attractive minimalist wallet for today’s professional, it’s a nice size for credit cards and business cards, it’s made of very thin leather to minimize thickness, and has RFID blocking in each of its three pockets. However, because it is made of very thin leather, I wonder about the longevity of the wallet.

The SZNS wallet came in an attractive black box with a sliding drawer.

The wallet also came with an SZNS decal and a microfiber cloth to clean the wallet.

Design & Build Quality


First Impression: One of the first things that you notice about the SZNS Burnt Sienna wallet is that it holds your cards and paper money vertically. I love that feature. The front and back of the wallet are similar. Each side has a pocket with a diagonal opening to insert cards and/or banknotes. The front of the wallet displays the “SZNS” logo located along the bottom right corner and the back of the wallet contains a very nice self-retracting pull tab used to extract the cards or banknotes in the center pocket.

When I received the SZNS wallet, I took some pictures of it while it was empty. Then after having inserted all my cards and money into the wallet, I noticed a 5 mm slit in the leather above the logo that I don’t think was there before inserting my cards. It was such a clean cut that it was difficult to see, but it was there. I’m not sure how it happened since I hadn’t even started using the wallet yet – I only inserted my cards and money. However, Mr. Amir Sigari, the co-creator of the SZNS wallets with his mother, was very courteous and very quickly sent out a new wallet. They offer free returns on wallets with defects and will exchange it or give you a full refund. They also offer a two-year warranty on this wallet

Leather: The wallet is made of semi-aniline leather. What is that? Pure or full aniline leather is a full grain leather that has been dyed throughout and “has not received any coating of pigmented finish” (By the way, you want full grain leather as opposed to top grain, genuine leather, or bonded leather). Semi-aniline leather is also a full grain leather that has been dyed throughout like aniline leather, however, semi-aniline leather additionally has a “small quantity of pigment, not so much as to conceal the natural characteristics of the hide” (from leatherusa.org) which gives it a more consistent look, protects the leather from some stains, and makes it more durable. Since this wallet has a small amount of pigment on the surface, it will not develop a patina like full aniline leather wallets.

Thread: The thread used in this wallet is a thin a cotton/nylon thread. Although, according to Mr. Sigari, they intend on increasing the size of the thread in the future.



Lining: Each of the three pockets of the wallet is lined with a satin-like lining that incorporates RFID blocking. The above photo on the right shows how the center pocket has sewn into it a black elastic strap with a leather pull tab which extends through the top of the pocket to the back side of the wallet.

According to Mr. Sigari, “both the leather and the RFID blocking inner fabric are die cut by a large stamping machine, after that everything is done by hand.”

Size: The thickness of the wallet when it is empty is about 5 mm.

The wallet is about 4.25″ long (~11 cm). This is a good size to accommodate credit cards and especially business cards. 

When compared to the Benjamin Bott Chickadee leather wallet that I recently reviewed, the SZNS wallet is taller but about the same width. You can also tell the difference in the leathers and thread used, both of which are thicker in the Chickadee wallet.

Use


I placed two plastic cards in the front pocket and six cards (two plastic cards, 4 paper cards) in the center pocket. I also placed two plastic cards in the back pocket as well as some cash (two banknotes).

Extracting the cards from the center slot was easy with the self-retracting pull tab. It was also easy to extract the cards from the front and back of the wallet because they were exposed enough to do so. The wallet was tight when filled with all these cards/bills but not too tight to make extracting the contents really difficult and yet not too loose so that you would lose your money or cards.
When full, the wallet was a little less that 0.75 inches thick (or about 1.8 cm thick). The wallet fits well in my hand and comfortably carries everything that I need. It really does minimize the bulk of traditional wallets.

Final Thoughts

The SZNS Burnt Sienna wallet is a professional looking lightweight leather wallet. It has the benefit of having three pockets, each lined with RFID blocking material and is tall enough to accommodate business cards as well as credit cards and cash. I was able to insert all of my necessary cards without having to leave anything out (six plastic cards and four paper cards). The wallet was not too tight to make extracting the cards really difficult and yet not too loose so that I would lose cards or money. However, the wallet is made with very thin leather and thin cotton/nylon thread. In addition, the wallet has only a two-year warranty and it is my impression that the wallet may not last a lifetime.

When comparing the SZNS wallet to my two favorite wallets, the Benjamin Bott Chickadee wallet and the Garzini Essenziale Finestra wallet I find that I still prefer the other two. Even though the SZNS wallet has RFID blocking and a self-retracting pull tab, the Chickadee wallet is the best made and the most minimalistic of the three but I also love the design of the Garzini wallet for the accessibility of my cards and money.

Source: The sample for this review was provided by SZNS Apparel. Please visit their site for more info.

 

Product Information

Price: $45.00
Manufacturer: SZNS Apparel
Pros:
  • All three pockets are RFID blocking
  • Attractive wallet for today's professional
  • Tall enough to accommodate buisiness cards and credit cards
  • Easily accommodates six plastic cards and four paper cards
  • Not too loose or tight
Cons:
  • Leather is thin
  • Thread is thin

Filed in categories: Reviews

Tagged:

SZNS Burnt Sienna wallet review originally appeared on on July 10, 2017 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Soap Studio MIND: The Batman vs. Superman Dawn of Justice Cerebral Combat Trainer game review

Do you think the next logical step in video gaming is mind control? If so, then you’ll love the concept of Soap Studio’s MIND: The Batman vs. Superman Dawn of Justice Cerebral Combat Trainer. It’s a video game that I was sent to review. It sounded like fun, but it turned out to be pretty lame. Let’s take a look.

What’s in the package?

MIND headset
Holo-Box
USB charging cable
Instructions

Design and features

The Cerebral Combat Trainer has two main components. The MIND headset and the Holo-Box. First, let’s talk about the MIND headset which is shown above. It looks like a pair of headphones, but the adjustable band rests against your forehead and not the top of your head.

The headset has a micro USB connection for charging the internal batteries. On the top of one of the “ear pieces” is a power button and a tiny status LED.

The shiny parts of the headset rest against the backs of your ears. The headset does not play any sounds. It’s just there to detect your brain waves.

The other component is the Holo-Box which is just a three-sided open-topped plastic box. A clear piece of plastic is inserted into the box at an angle to act as a mirror.

Your Android or iOS device rests face down on the Holo-Box. The phone’s screen reflects off the angled plastic to create a very viewing box.

I tested the MIND Holo-Box with my iPhone 7 Plus and didn’t really see any advantage to using the Holo-Box because the size of the “screen” in the box wasn’t any bigger or better than just viewing with the phone. The info on the package says

By combining a smartphone and a Holo-Box, players can experience a 3D holographic projection, as if in a private cinema.

Yeah… no. Not even close. It’s just a mirror image of your phone’s display. Nothing 3D about it. At all.

It’s time to control Batman with my brain!

Before getting all brainy, you first have to charge the headset with the included (or any) micro USB charging cable. Then you put on the headset with the band touching your forehead and the earpieces resting on your ears like the frames of a pair of eyeglasses. And that’s where I ran into another problem with the MIND Cerebral Combat Trainer. It doesn’t fit if you wear glasses because the eyeglasses temples prevent the headset from properly resting on your ears.

With my glasses removed and the MIND headset in place, I launched the MIND app on my iPhone 7 Plus and was giving the choice of using the Holo-Box or just the phone. I tried it with the Holo-Box first and was instructed to place the phone on the Holo-Box.

The app then begins the headset connection phase.

I had a hard time getting the headset to fit correctly on my head. See that tiny icon in the lower left corner that looks like a pair of headphones with a red X in the center? That icon would continuously switch from X which is bad, to yellow which is good.

I finally got a good connection and went through some calibration tests where I was asked to blink twice and to make the Batman logo spin faster.

Once I passed the calibration steps, the game proceeds.

The game has several levels which are represented in a circular pattern. By double blinking your eyes, you can switch between the levels, but to select the level to play you have to tap the screen. If you’re using the Holo-Box, that means you have to pick up the phone, tap the screen and then set it back on top of the Holo-Box.

Each level instructs you to do something with your mind. In the first level, it’s your job to have Batman fly through gates.

The idea is that you use your mind to make Batman fly higher or lower so that he doesn’t miss a gate.

Easy right? Actually yes. Very easy. I didn’t even try to focus my thoughts on Batman’s flying. I just watched the screen and he was able to get through every gate without problems. Hmmm…. Either my brain is insanely powerful, or this game is lame…

The next level has you help Batman hack a lock by spinning gears until they snap in place. Again, I had no problem getting through this level by no even trying.

I didn’t run into trouble until the third level. In this level, Batman is in a parking garage and bad guys appear out of thin are. You’re supposed to us your mind to move a target over the bad guy and then Batman will zap him. I was horrible at this level and got seriously annoyed at the game because it seemed like it would just do things randomly no matter if I focused or not.

Final thoughts

After the third level, I was done with the Soap Studio’s MIND: The Batman vs. Superman Dawn of Justice Cerebral Combat Trainer. It’s not fun and it’s crazy expensive at $120 with over $80 shipping to the US. A kid might enjoy goofing around with this game (for about 30 minutes), but not at that price. My advice is to skip this one and use your mind for something more productive like reading an actual Batman or Superman comic.

Source: The sample for this review was provided by Soap Studio. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $120 + shipping
Manufacturer: Soap Studio
Pros:
  • I really can't think of anything good to say about this product
Cons:
  • Expensive
  • Shipping is very expensive
  • Not sure you can really control anything in the game with your mind
  • You have to pick up the phone from the Holo device to press buttons on the screen
  • Can't wear glasses with the headset

Filed in categories: Reviews

Tagged:

Soap Studio MIND: The Batman vs. Superman Dawn of Justice Cerebral Combat Trainer game review originally appeared on on July 9, 2017 at 5:22 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.