Incase Compass backpack review

Carrying around all the things we feel we need on a regular basis means most of us take a bag of some sort with us to most places. It may be a purse, waist pack, laptop bag, satchel, or backpack, but it’s all the same in the end: does it carry what you need to get through the day? Incase makes a lot of different models of bags, and they recently sent us a Compass backpack model in solid black to review.

Note: Photos may be tapped or clicked for a larger image.

Here is Incase’s description from their website:

Specs
Dimensions: 18.5” x 11.75” x 5.25” (L x W x H)
Volume: 24L
Compatibility: Up to 15” MacBook Pro, iPad
Material: Durable 270x500D blended weave polyester.
Heavy-duty, triple-coated 900D polyester front panels and base.
Storage: Top access, faux-fur pocket.
Front pocket with zip closure.
Front bottom pocket with key ring clip.
Main compartment with built-in organizers and padded laptop sleeve

I moved my EDC stuff to this bag the first day, and have carried it back and forth to work for a few weeks now. The bag is sized to hold a 15″ MacBook Pro, and/or any size iPad. Across the back of the inside area is a full-height, plush-lined sleeve. There is only an inch or so of room above the inner face, which only the largest laptops will peek out of.


My work laptop is a Lenovo T440s, which has a 14” diagonal screen. It rattles around in the plush inner laptop sleeve and never sees out. My Retina 15” MacBook Pro slides easily inside, even with the walnut case on it I reviewed earlier, and does show over the top of the inner wall, but only a bit. The 12.9” iPad Pro fits without any issues. There is also a non-padded sleeve sewn to the laptop sleeve that does not reach the bottom of the bag. This will hold my iPad Air 2, as well as the larger iPad Pro, but doesn’t offer the full coverage from other items afforded by the laptop sleeve. Letter-sized magazines and papers fit here without a problem. It is also loose enough to slide the headband of non-collapsible headphones into so that they don’t settle to the bottom of the bag.

Across from the rear laptop sleeve, there are two flat pockets about 4” wide, with three pen silos in between. These are sewn in high on the bag, which allows them to be easily accessed, and other bulkier things to settle into the lower part of the bag. The remainder of the interior is open, so that umbrellas, hard drives, lunch bags, or whatever you carry around can fit with ease. It’s quite roomy in there.

On the outside of the bag, on the side that everyone sees, there is a small faux-fur lined pocket suitable for sunglasses, a phone, or a music player accessed from a fine-toothed zipper in the seam. I keep my rechargeable earbuds in there, in their case, so that I can always find them and the case doesn’t get opened accidentally. This pocket is a free-floating sac inside the interior, above the pen loops. My iPhone 6s Plus can fit in, but you have to wiggle it a bit, and there’s no way it would fit with headphones attached.

There is a larger lateral pocket a little lower, across the face of the rear flap, that holds most current phones and even some phablets. It is not furry inside, but easy to access by taking your left arm out of the strap and sliding the pack around to the front. The wide-toothed zipper zips down to open, however, so even though they would fit, I would not keep a passport or wallet in there. There is no way to secure it closed, although I never had it open by itself in use. But on a crowded bus or train, it could easily be opened by “bad actors.”

The last set of pockets is part of the lower heavy-duty coated covered band at the bottom, which extends around three sides. In some colors, this is an accent panel. The one I was sent is just a deeper black, but the coating prevents the bottom third of the pack from getting soaked through. Sitting your bag down on a damp or dirty lawn or floor can be remedied with a damp cloth. The pockets are accessed through a fine-toothed zipper that runs the full width of the back. There are two equal slash pockets on the pack side, but there is a lot of play in the design, so you could easily fit gloves, a phone, a banana, or a power supply into this area. There is a short 2” key strap just inside the opening with a metal clasp for your key ring. There is not near enough slack to actually use the keys while attached, however.

The back of the Compass has 2” horizontal bands sewn into the full back of open weave mesh with padding enough that you don’t feel the hard edges of things in that rear laptop sleeve. The fully-adjustable straps are over 2” wide, but not nearly as padded as some I’ve used. They are sewn in at the top with a 1” wide simple webbing haul loop that is comfortably sized, without being stiff and irritating rubbing on your neck while wearing the pack. During my walks from and to the car for work and around town, I found the pack to allow me to haul much more than I could comfortably carry in my previous pack. While the Compass is too flexible to stand on its own, it holds a lot, organizes that content sensibly, and allows the user to carry along different configurations of items at different times.
At $79.95, it’s well worth the money. The build quality is excellent, and the organization adds to the usefulness. It is available in Black, Black Camo, Navy, Deep Red, and Bronze.

Source: The sample for this review was provided by Incase. Please visit http://incase.com for more info and Amazon to order one.

 

Product Information

Price: $79.95
Manufacturer: Incase
Retailer: Amazon
Requirements:
  • none
Pros:
  • Quality materials and workmanship
  • Faux fur to protect several pockets
  • Thoughtful layout of pockets

Filed in categories: Reviews

Tagged: ,

Incase Compass backpack review originally appeared on The Gadgeteer on October 7, 2017 at 1:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

The Pocket Shot Jr. Slingshot review

You’re familiar with the classic slingshot design, right? Well, the gang at Pocket Shot has tossed that out the window, reimagining the slingshot concept with a completely new form factor. We’ve got the mini-sized version of their product, the Pocket Shot Jr., for testing. I also recruited a pair of teenagers to help with testing. Teens & slingshots: a perfect pairing. If you have kids, you know what I mean.

Let the adult-supervised mayhem begin!

Design and Construction

The Pocket Shot Jr. Doesn’t look like any slingshot you’ve ever seen. There’s no handle, no y-frame, and no rubber band. It’s a ring attached to a latex pouch. The pouch itself tapers to a point where your ammo sits when shooting, and has a set of flanges (Pocket Shot calls these “power fins”) that maximize power and accuracy. The whole design looks like something out of a dystopian sci-fi film… maybe the Hunger Games, or a Mad Max film. Whatever your genre preference, it’s a slick looking design.

The Pocket Shot team didn’t just stop with the new form factor; there’s some nice engineering design going on in the finished product. The grip ring is composed of two parts: an internal threaded sleeve that the pouch snaps onto, and an external locking ring that tightens down to secure the pouch. This allows for quick and easy change-out when your latex pouch needs replacement (they are rated for 200-400 shots before wearing out). There’s also an integrated screw-on lid that allows you to keep your ammo stored in the pouch when not in use, which also doubles as a wrench to tighten the locking ring. With the cap in place, you can stuff the pouch into a ring for super-compact (1/2” by 1-3/4”) package that fits easily into a pocket. The ring components and lid are made from high-impact polycarbonate composite for extended durability. There’s a lot of attention to detail in the design and materials here, and I have no doubt that these components will last a long time under extended use.

Time to Shoot Stuff!

Speaking of use… operation is super-easy. The ammunition drops into the pouch. You hold the ring with one hand, pull back the pouch with the other hand behind the fins. Aim at your target, release, and you’re shooting. We were firing at targets within moments of opening the packages. Reloading takes seconds. The lads both commented on how easy the Pocket Shot Jr. was to operate, and how much fun they were to play with.

If there was one area that the boys had a bit of trouble with, it was learning how to shoot accurately with the Pocket Shot Jr. It takes some practice, and you have to resist the urge to pull the pouch back as far as you can (a short pull is recommended). The practice ammo supplied with the package is made from bright orange 10mm ABS plastic, designed for safety and findability. We had a tough time getting accurate shots from more than 10 feet away from our target setup. When we swapped out the practice ammo for smaller AirSoft pellets, we found that accuracy and distance were much improved. Pocket Shot also makes a variety of metal ammo for more serious applications (like hunting), but we were doing basic target practice here and did not test these alternatives.

It’s also important to note that the model we tested is the smaller model; the full-size Pocket Shot packs a lot more power and includes options for upgrading the pouch to a “pro” version for more power. The big-boy version also includes a variety of upgrade options that work with basic design, including an attachment to shoot arrows! You can check out the full lineup on the Pocket Shot web site, as well as a bunch of fun videos about the product… for kids, I think the Pocket Shot Jr. is an ideal place to start (with the practice ammo) to get all the fun. And it is fun to play with, indeed.

It’s also important to note that the Pocket Shot, like any product in this category, can be dangerous. Our testers wore protective goggles throughout the evaluation and were under adult supervision for the whole process. These devices should never be aimed at other people, and appropriate caution should be used to ensure safe handling!

Conclusion

The Pocket Shot Jr. is an innovative, modern-day upgrade to the classic slingshot. It’s also designed, manufactured, and shipped from right here in the USA. At a retail price of $12, it’s a fun and inexpensive entry point to the world of Pocket Shot products. Replacement pouches and ammunition is inexpensive as well. Check out the Pocket Shot Jr. and the full lineup of Pocket Shot products at their website. You can also check out our review of the regular sized Pocket Shot, Pocket Shot Hammer, and the Pocket Shot Arrow kit.

Source: The sample for this review was provided by Pocket Shot. For more info visit their site and you can order one from Amazon.

 

Product Information

Price: $12.00
Manufacturer: Pocket Shot
Retailer: Amazon
Pros:
  • Innovative design
  • Great construction and materials, all made in the USA
  • Easy to learn and use
  • Compacts nicely for pocket-sized storage
  • Included cap keeps all your ammo stored in the device when not in use
Cons:
  • Takes some practice to shoot accurately

Filed in categories: Reviews

Tagged:

The Pocket Shot Jr. Slingshot review originally appeared on The Gadgeteer on October 7, 2017 at 9:43 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

iVAPO iPad Pro 10.5 case review

When you spend hundreds of dollars for an iPad Pro, you really don’t want to spend another hundred dollars on a case just to protect it. Today I want to show you the iVAPO case for the 10.5 inch iPad Pro. At only $17.49 from Amazon, it can’t possibly be that good right? Let’s find out.

What is it?

The iVAPO iPad Pro 10.5 case is exactly what you guess it is, a case for the 10.5 inch iPad Pro. No surprises there. But there is a small surprise inside.

Design and features

The iVAPO case is similar to other iPad cases that have a folding cover on one side and an iPad holder on the opposite side.

The iVAPO has a grey denim-like look and feel that provides grip when you’re holding the iPad and helps protect the screen and back of the tablet from scratches and wear.

Although the case looks and feels nice in hand, I did notice a problem with it. The material sheds which leaves a thin layer of dust on the iPad’s display that’s hard to clean off without removing the iPad entirely from the case.

The iPad is easy to insert and remove from this case. There are cutouts for the speakers, lightning connector, and camera, so you can use all the features of the iPad just like you would if it weren’t in the case.

The one way the iVAPO sets itself apart from other iPad Pro cases is the built-in holder for the Apple Pencil. The Pencil stays in the holder even if you turn the case and iPad upside down.

To retrieve the Pencil, you can either hook the tip with your fingernail and pull it out or you can push the Pencil out from behind the case.

The iVAPO case cover is like a lot of iPad case covers in that it can fold out of the way behind the case when you’re using the iPad. It can also fold into a stand to prop up the iPad.

The cover has magnets to activate the auto sleep and wake feature. Unfortunately, I found that the cover would not always seat properly over the iPad’s display to engage that feature.

Final thoughts

It’s tough to complain about a case that is priced at less than $20, but there are a few issues that annoyed me about it that are worth repeating. The case material leaves a layer of dust on the iPad and the cover doesn’t always turn the iPad’s display off when the cover is closed.

Other than those issues, there’s not a lot more to say about the iVAPO iPad Pro 10.5 case. It does what it’s been designed to do, which is protect the iPad Pro and hold an Apple Pencil. If you’re on a budget after spending all your money on the iPad Pro and the Pencil, the iVAPO won’t overburden your wallet and is worth a look if you can get past the issues.

Source: The sample for this review was provided by iVAPO. Please visit Amazon for more info and to order.

 

Product Information

Price: $17.49
Manufacturer: iVAPO
Retailer: Amazon
Pros:
  • Affordable
  • Built-in Pencil holder
Cons:
  • Cover doesn't always activate the auto sleep feature
  • Material leaves dust on the iPad's display
  • Bulky

Filed in categories: Reviews

Tagged: ,

iVAPO iPad Pro 10.5 case review originally appeared on The Gadgeteer on October 6, 2017 at 6:09 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

SmartOmi ACE Bluetooth Wireless Earbuds review

The quest continues! For my perfect set of wireless earbuds, that is. Well, for me, anyway. I’ve tried out multiple products, but none has been the “perfect” one yet. Would the Smartomi ACE Bluetooth Wireless Earbuds be “the” ones? With their small size and charging storage case, they looked sleek and all, but would they survive the rigors of my workouts and work out for everyday use? Something told me that the answer might be a yes. Let’s see how they did. Gadget on!

Specs

  • Dimensions: 6.1 x 4.7 x 1.6 inches
  • Weight: 4 ounces including charging case (each earbud is o.2 ounces)
  • Chip: AB1526
  • Charging time: about 2 hours
  • Play/talk time: 2.5 – 3 hours
  • Standby time: about 150 hours
  • Battery capacity per earphone: 55 mAH
  • Battery capacity of charting case: 500 mAH
  • Working range: about 33 feet (1o m)
  • Driver unit: 6mm speaker
  • Bluetooth: v4.2
  • Warranty: 60 days no reason return, 18 months warranty

Packaging

The Smartomi ACE earbuds arrived in some quite nice packaging, a simple black box with the Smartomi logo on top and some minimal info on the bottom.

Contents

  • 1 pair of SmartOmi ACE True Wireless Earbuds
  • 3 pairs of earbuds Tips (in sizes Small, Medium, and Large)
  • 1 portable charging case with 500mAh battery
  • 1 micro USB cable for charging the case
  • 1 user manual

Features, Functions, and Performance

Above are the Smartomi ACE earbuds, along with the three pairs of included eartips in sizes large, medium and small. Since I have cavernous ear canals, I went straight for the size large.  They were easy to install, just push them onto earbud’s posts with a bit of a twist.
Above is the Smartomi ACE’s battery case.  It has a hinged, transparent plastic lid that allows the user to see inside, which is useful because the earbuds light up to indicate charging (more on this below).  There are also two “pockets,” one for each of the earbuds, and each pocket has four tiny brass terminals that charge the earbuds.  Either side of the pockets have a groove that makes it a bit easier to grab the earbuds and pull them out.  A tiny blue LED between the earbud pockets indicates charging.  Additionally, the case has a very Apple-esque design, with a matte aluminum around the bottom half that looks quite a bit like the iPhone’s finish.
One surprisingly cool and useful feature of this case is a set of hidden magnets that interact with magnets in the earbuds themselves. When the earbuds are placed near the charging “pockets,” the magnets attract together and SNAP! the earbuds lock right into position on the charging terminals, perfectly, every time.  The case holds the earbuds so securely that you can actually turn the case upside down and the earbuds stay put.  I really like this feature. I didn’t have to eyeball and manually position the earbuds into their charging pockets as I did with previous earbud charging cases, which sometimes meant that they were not perfectly seated on the charging terminals, thus preventing them from charging.  No bueno.  This case eliminates that.  Also, the earbuds seldom need to be manually powered off.  When you are finished with them, just place them in the case and they power off automatically.  When you remove them from the case to use them, they power back on and re-pair automatically.  Very cool.
Above, I have the included mini-USB plugged into the rear of the case.  This setup charges both the battery in the case as well as the earbuds themselves simultaneously.  The case gives the earbuds a significantly longer usage time.  I was able to easily use the earbuds for well past a full week of 6 or 7 workouts lasting 1-1.5 hours due to the additional boost provided by the battery in the charging case.

Above, the tiny blue LED glows while the case is in charging mode.
Above, a closeup of the inside of the earbuds in which you can see the four charging contact points on each earbud.  This is probably a good point to mention that pairing the Smartomi ACE with my iPhone was simple the first time and they remained paired every time I used them, which was not the case with other wireless earbuds I’ve tried. Pleasant-sounding voice prompts are used to indicate various functions, such as when the earbuds are powered on, when they are paired and so forth.
Above, a closeup of the earbuds from the outside.  Each earbud has a tiny microphone hole that can be used to make phone calls.  A single push button on each earbud that controls various functions, like music pause and phone call answer.  In addition, the chrome-colored rings that encircle these buttons are actually LEDs that glow during charging.
The Smartomi ACE earbuds are quite small, but more than that, they have an ergonomic, smooth shape, which I think helps them fit a bit better in my ears, and remain comfortable for a long time.  How do they sounds?  Excellent.  As long as you have the proper size of silicone ear tips for your ear and you have them securely seated in your ear canal, they produce some sharp highs and solid base.  For listening to podcasts, they were good, but listening to music or movies was where they really shined.

As seen in the image above, these earbuds barely stick out of my ears at all—they really fit right down in my outer ear.  I like that, because it means that they are much less likely to get caught on something and get knocked out, or get jostled out while you are working out.

Above, a shot of the earbuds in the same position as the photo above it.  This is close to how the Smartomi ACE earbuds are intended to fit in the ear, and they fit OK for me like this, but didn’t feel quite secure enough.
The above view shows how the earbuds actually fit best in my ears.  Due to the contoured, teardrop shape of the earbuds, I don’t think this is how they were designed to fit.  However, as mentioned above, I have huge ear canals, and this positioning worked quite well for me.  I’d been wearing the Smartomi ACE earbuds for several weeks at the time of writing this review, both for heavy-duty workouts as well as working at my desk all day.  I’m happy to report that these earbuds stayed in more consistently during my workouts—despite lots of sweat and motion—than any earbuds I’ve tried yet.  And that’s saying something.  They also remained comfortable while wearing them for extended periods while working at my desk.  Also, these earbuds are so small and low-profile that when people stop by my desk to talk to me, they almost never notice that I am even wearing earbuds.

Conclusion

I really like these Smartomi ACE Bluetooth Wireless Earbuds.  They are small and very lightweight, plus have a contoured, teardrop shape, all of which I think helped them more consistently stay in my ears during sweat-drenched workouts than any other earbuds I’ve tried to date.  Operation of these earbuds is dead simple, with just a single, easy-to-push button on each earbud controlling multiple functions like music pause and phone call answer.  They have a good battery life on their own, but their rechargeable, battery-powered storage case can provide the equivalent of up to four additional charges to boost the earbuds’ usage time.  I really like these Smartomi ACE Bluetooth Wireless Earbuds.  If you are looking for a pair of wireless earbuds, I’d recommend taking a look at these.

Source: The sample for this review was provided by Smartomi. Please visit their site for more info and Amazon to order.

 

Product Information

Price: $79.99
Manufacturer: Smartomi
Retailer: Amazon
Requirements:
  • USB port for charging
Pros:
  • Very small, lightweight, contoured earbuds
  • Fit well in my outer ear—nestled right in and stayed there
  • Magnetically "lock" into the charging case
Cons:
  • Water-resistance is unknown

Filed in categories: Reviews

Tagged:

SmartOmi ACE Bluetooth Wireless Earbuds review originally appeared on The Gadgeteer on October 6, 2017 at 10:16 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

TaoTronics 4K action camera review

GoPro has forever changed the approach to action video with their line of HERO cameras.  While the price range of $150-$400 for their latest models is a lot less than comparable professional video equipment, it can still be more than some would like to spend on this type of gadget. Other manufacturers have broken into this market to lure consumers with lower prices and various other features and functions. One such company is TaoTronics. This camera is made in China and has up to 4K30FPS recording. Keep reading to see what I think!

The TaoTronics 4K Action Camera is a GoPro “Clone” that specification-wise sits somewhere between the GoPro HERO Session and HERO4 Black. The comparative Features are summarized in the table below:

HERO4 Silver TaoTronics HERO4 Black
Video Modes*
    4K 15 30 30
    2.7K 30 30 60
    1440 0 0 80
    1080 60 60 120
    720 120 90 240
    480 240 0 240
photo resolution 12 16 12
photo shots/sec 10 10 30
connectivity WiFi, Bluetooth WiFi WiFi, Bluetooth
Water depth 40 30 40
Size (mm) 30 30 30
59 59 59
41 41 41

* Video Mode is the maximum framerate supported in each resolution

The camera comes in a rather ordinary cardboard box.

The camera is about the same size and shape as the HERO4 and comes with a waterproof housing that has a similar hinged attachment point as the GoPro line of cameras. It is therefore compatible with a whole ecosystem of GoPro style attachments.

The camera also comes with a protective mount backing (that fits onto the hinge of the waterproof front and has slots for a nylon belt), a tubeframe mount, several adhesive and hinged mounts for surface mounting.

The system also comes with a snap on case with 1/4-20 mounts on the top and bottom and a spring clip mount for attaching to a belt or similar. Hinged mounts that are orthogonal allow the camera to be tilted in 2 dimensions and a male 1/4-20 mount (which allows any camera with a tripod mount to interface with GoPro fittings) and a female 1/4-20 mount are also included to permit the camera to be swiveled in each direction. Specific mounts, for mounting to the chest or helmet, pontoon and selfie sticks, and suction mounts are not included.

Inside the packaging provides some illustrations of how the included accessories can be used to mount the camera to a helmet or bicycle handlebar.

The buttons on the waterproof case are spring loaded pins that penetrate a gasket. There isn’t an impermeable diaphragm on the inside of the case so water penetration is a definite possibility.

The camera layout is similar to the HERO4 as well, with a power/mode button on the front, an OK/Start/Stop button on the top, an up/down button on the side and a screen on the back.

One noticeable difference is that this camera doesn’t have a LCD status window or LED indicators on the front of the camera. Actually, it is difficult to determine that the camera is recording from the front, so in a situation where you’re recording a selfie, you will have to look at the back or a smartphone with XDV running to make sure the recording has started or is in progress. Another difference is that this camera doesn’t have any feature similar to a highlight button, which is located on the side of the HERO4 and can be used to bookmark significant sections of the video. The screen is not touch sensitive like it is on the HERO4 but since the screen is most often in the housing, and since this doesn’t have the video editing features of the HERO4, a touchscreen isn’t really needed. The screen comes with a matte screen protection on top of a clear glossy screen protector on top of the plastic glossy screen cover that is part of the case. I prefer to leave the matte cover on to reduce glare from the sun. The camera also has a blue LED on the back that is lit while powered and blinking while recording and a red LED that is lit while externally powered and blinking while charging. The LEDs can be disabled if the camera is used as a dashcam.

The camera is powered by the battery below. It appears to be a typical HERO type battery.

The battery door is held in place by a springy piece of plastic and is completely removable. A plastic tab on the battery help to pull it out.

The standard operation is menu driven and circulates through video recording, camera recording, slow-mo recording, playback and settings screen. To change the mode press the mode button and to start or stop operation in the desired mode press the OK button.

The video recording screen shows set resolution, memory remaining, WiFi signal, and battery strength. The bottom of the screen shows if the sound is recorded, if the image is rotated, loop recorded, time lapse recorded, and the elapsed time of the recording.

The still shot screen shows set resolution, memory remaining, WiFi signal, and battery strength. The bottom of the screen shows if dramashot is enabled, what the delay timer or the auto timer is set to, and the current time.

The slow-mo mode is very similar to the video mode

The playback mode displays a preview of the recorded image and what order it is in the camera. The date and time the recording was made, while useful, is not displayed. Once the playback is started the up and down buttons on the side can be used to adjust the speed of the playback from 2x, 4x or 8x speed in either forward or reverse. A long press on OK will bring up a erase menu for the item on the screen.

There are a number of settings on the camera to tailor it to your shooting environment and preferences.

The video resolution setting allows the user to select any of the supported resolutions (even the high frame rate options). Recording sound allows you to select recording a video with or without sound.  The TaoTronics has a time lapse mode and can be set up for 0.5, 1, 2, 5, 10, 30, and 60 seconds intervals for video. Loop intervals are limited to 2, 3, and 5 minute segments. These segments seem short compared to the 5, 20, 60 and 120 minute intervals of the HERO4, however, if this is being used as a dashcam, 5 minutes is usually sufficient to capture the good (awesome car on the road), the bad (awesome car hits car in front of you) and the ugly (you hit car in front of you). The drivemode on the TaoTronics is similar to the QuikCapture mode on the HERO4. Not only will the TaoTroincs begin recording as soon as the camera is powered from the MicroUSB port, the camera will begin recording as soon as the power button is pressed. note that loop recording isn’t available if time lapse recording and vice versa.

The TaoTronics time lapse mode can only be set to 3, 10, 15, 20 and 30 second intervals for photo. The TaoTronics will capture a burst of photos by setting up the feature called DramaShot; the camera can be programmed to capture either 3, 5 or 10 photos each time the OK button is pressed. However, there is no way to record continuous burst photos and there is no way to capture a photo while recording a video. The camera has a 3, 5, 10 or 20 second timer. A timer cannot be set to start a time lapse or DramaShot.

The photos and videos share common exposure settings for white balance (auto, sunny, cloudy, incandescent, and fluorescent) and exposure (-3 to 3 by integer steps) There is no shutter setting for the camera. The camera also has a setting to limit interference by fluorescent light by indicating if the electrical frequency is 50 or 60 Hz.

When mounting the camera upside down there is a setting to rotate the image, but there is no accelerometer in the camera, meaning that the camera is unable to determine the correct orientation automatically.

The settings are available in Chinese, English, Japanese, Korean, Russian, German, French, Italian, Spanish, Polish, Portuguese, Dutch, Hindi, and Turkish.

This review is with the firmware version 20170605V23. The camera is compatible with micro SD cards up to 64 gb. I put a 128 gb card in it and the camera ruined it; I needed to reformat the card afterwards. I made the performance tests with a 16gb Class 2 card, which seemed to work OK even though the data rate on some videos is 5.5 MB/s – about 2.5x the minimum guaranteed capability of the card.

I wanted to demonstrate the camera recording features on their own, but also demonstrate some reference of what is being recorded. using the 1/4-20 mounts from the TaoTronics package and a clamp mount from a GoPro-compatible package I rigged a Canon SX720 HS, LeEco Le Pro3 Smartphone, and the TaoTronics together.

I shot the same scene on all three devices so an unbiased comparison of the recordings can be made. Note that the Canon top resolution is full HD 1920×1080, not 4K. The recording  of me walking is at 4K resolution on the LeEco and TaoTronics. The recording of the 9/11 memorial is in FHD on all three devices. I’m making the videos available on a mega.nz site so that you can see them without re-encoding but downloading from here is slow, so please be patient.


4KTaoTronicWalk


4KLeEcoWalk


FHDCanonWalk


FHDTaoTronic

FHDLeEco


FHDCanon

Note that I trimmed the length of the video with software that doesn’t re-encode the video so no modification of the recorded image occurs during the process. The wide field of view of the TaoTronics means that each item recorded has less resolution. I’m not sure if this is the reason why the shots from the Canon and LeEco look clearer. Also the lens flare and glare off of the TaoTronics lens is significantly more noticeable than on the other two shots. Unless you’re JJ Abrams this isn’t a good thing.

I made some recordings of the camera near a pool. The reflection of the sun off the water is a good test to see if the camera can effectively record very bright scenes. At the same time the shadow of the shrubs is recorded.

4KPoolAbove

The camera does a good job at recording the pale blue of the water under the surface; the block artifacts of the compression process are visible, but small. Key-frames of the shadow of the waves are visible on the pool bottom but I’m not sure the other cameras would not have captured similar artifacts.

4KPoolBelow

distortion became much more obvious at slo-mo speeds

HDSlowMoPool

I literally threw the camera up into the air and had it land in the water. I didn’t notice any water intruding into the case after this test.

To test the action recording I took the camera out for brief run, just holding on to the case so that the picture shook about a lot. I wanted to see how well the camera can record a rapidly changing scene. The results show that the camera recorded the scene without generation of large blocks or skips in the recording. I did have the camera drop audio a couple of times in this situation. I’m not sure why this happened – it may be the sub-optimal MicroSD card I was using. Also, its pretty evident that there is no image stabilization.

4KTaoTronicRun

The camera did a nice job at recording the same scene in slo-mo

HDSlowMoRun

I shot a scene at dusk and the shot looked very similar to what was actually there. I noticed there was a lot of noise in the dimly lit night sky, but some elevated noise at this low lighting is to be expected. I didn’t change the exposure setting but this would have improved the captured image even more.

FHDNight








The companion app for this camera is called XDV and is available from Shenzhen Sunchip Technology on the iPhone and XDV by wisdomplus of the Android play store. The app allows you to set the recording mode of the camera, to view a live stream of the recording, to review recorded images on the camera and to access other settings on the camera. The connection to a camera can only be made by using the WiFi of the camera generated access point, so you’re limited to the range of the camera. It would be great if the camera and smartphone could connect as clients to the same WiFi system, then the range could be arbitrarily large through bridging of multiple antennas.

In the end I think that the recorded video was slightly better on the other two cameras and footage from YouTube (even though this may post processed) looked a bit more polished that what I recorded. If you want to get that last bit of video quality out of your shots or more special features you will probably need to spend a bit more. However, the TaoTronics camera is a very close second. I see myself taking a lot more action shots with this in the future and I think its a good gadget for anyone to have in their arsenal.

Source: The sample for this review was provided by TaoTronics. Please visit their site for more information and Amazon to check prices / order.

 

Product Information

Price: $79.99
Manufacturer: TaoTronics
Retailer: Amazon
Requirements:
  • Class 10 MicroSD card up to 64GB
  • Smartphone for using paired app is optional
Pros:
  • Good Picture
  • Fits GoPro form factor
Cons:
  • No indicator light in front
  • some lens flare/glare in brightly lit scenes
  • only WiFi connection as an access point

Filed in categories: Reviews

Tagged:

TaoTronics 4K action camera review originally appeared on The Gadgeteer on October 5, 2017 at 10:34 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.