It works by using micro blowers that create pressured airflow through magnetic plates, and usage ultimately results with one partner quiet and the other happy. The colors it comes in are blue, red, and white.
Eliminating snoring and breathing pure air can make your entire night of sleep more enjoyable. Sleeping with a violent snorer is like waking up to an alarm that you never set, and can’t turn off. The heaviest of snorers tend to be in denial, so just gift this to someone who needs it.
Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.
We currently have a security camera on our front doorbell, our driveway, and our back deck. All three are what I call ‘dumb’ type cameras where they just record and can send notifications when they sense movement. What we do not have is a security camera inside our home. When I was offered the chance to review the new Tend Secure Lynx Pro security camera I jumped at the chance to put it in my home and see how it worked.
What is it?
The Tend Lynx Pro is a ‘smart’ camera that has the ability to recognize faces and only send notifications when it does not recognize the person. You can even train the camera when it fails to recognize the person you have set up by pointing out the face in the video and indicating the person whose profile you have set up. It works in both daylight and dark and can be set up outdoors and indoors.
Hardware Specs
This camera is really impressive and gives you a lot for your money.
Camera resolution – 1080p (1920×1080) HD at 30 frames/sec
Built in microphone
Built in speaker
Can handle temps from -4 to 115 degrees Farenheight
Built in battery to handle up to 1 hour of recording for up to 3 days. It also has the internal storage to hold the data. This is perfect for power outages.
You get a full 7 days of cloud storage for no charge.
App works with IOS 9 or higher and Android 5 or higher.
What’s in the box?
The packaging for this camera is excellent. The picture above shows the outer slipcover for the box. Once you pull that off and open the top cover you are presented with the actual camera as you see below.
You then lift that whole blue box top section off and you see the mounting stands on the left and the paperwork and accessories on the right. The power adapter and extra long cord are all in a separate box stored below the Hello paperwork.
The image below shows exactly what is inside the box.
Mounting stands for the wall
Camera
User Manual
Extra power extension cord. It does not have to be used if you do not need it.
Hardware to mount the camera
Power adapter and long power cord.
Design and Features
After unpacking the box, the next thing I did was to place the camera where I wanted it and install the app. Let me state right up front that manual recommends that you mount the camera 6 to 7 feet above ground shooting towards the ground. They state that will help with the facial recognition. For my testing purposes, I ended up placing the camera on top of several boxes that were sitting on top of a bar in our home entryway. So the camera was shooting across horizontally instead of having a nice downward view. The camera still did a pretty good job on the facial recognition. The app will work on IOS and Android. I loaded it onto my Galaxy S9. The screenshot below is the opening screen of the app. I clicked on the ‘I’m setting up a new camera’.
The next screen asked me which type of camera I was setting up. Tend makes several cameras so I chose the Lynx Pro.
The next few screens wanted me to be sure the camera was powered on and the LED was blinking red and green. I then went to my phone settings and connected via WIFI directly to the camera.
Once connected to WIFI, I went back into the app. The app recognized I was connected and asked me to name the camera. As you can see below, I named it ‘Front Door’.
I then got the option to pick the wireless network I wished to connect to. As you can see, there are some networks with some interesting names in our neighborhood!
The last setup screen tells you how to mount the camera for best facial recognition. I will note that originally I had the camera facing my front door, however that was causing way too much back lighting and the camera was having a hard time with facial recognition. Once I moved the camera away from facing direct light it worked much better.
The next few screenshots will show you how the settings screens look in the app. This first screen gives you a lot of great info and options. I want to note that the level you are seeing for talkback volume is rather loud. The speaker on the camera is quite impressive.
This next screen below shows you the secondary screen you get when you turn on motion detection. You can adjust sensitivity and have the camera send notifications for unknown faces. You can even set schedules as to when you want to be notified. Once you start adding folks to profiles for facial recognition, you can turn off notifications profile by profile if the camera recognizes the face.
The screenshot below is the entry screen to set up profiles. You simply take a picture of the person with your phone and they are set in the app.
The screenshot below shows the recordings it made for part of a day in my home. When you see a big question mark it means the app did not recognize the person in the video. I found when lighting was good, the camera did a great job of recognizing both myself and my husband. Of course, when we entered the scene walking away from the camera it almost never recognized us. I believe if I ‘taught’ the camera that it was me by clicking on the head in the video and pointing to my profile it might have learned to recognize us better. You can also see the screen will show you a ‘watched’ indicator if you have already viewed the video. As stated earlier, the app will store up to 7 days of video in the cloud for free.
Below are some sample recordings it made during the day and one from nighttime. There was little to no light in the room when the nighttime recording was made.
What I like
I love the video quality. I think it does a pretty good job of facial recognition. I also love that you get a full week of free cloud storage. The microphone and speaker on the camera are also both excellent. The fact that it also has a backup battery and internal storage in case of power failure is a winner. I used to own a Nest camera at one time and I believe this camera gives you way more bang for the buck.
What needs to be improved
This camera is pretty awesome. If any suggestion could be made it would be to see if they could somehow get this camera to work without wires.
Final thoughts
I really loved this camera. When compared to the outside cameras that I have the video quality is excellent. I feel the video quality is certainly comparable to the Nest home camera I used to have. You can’t beat the free 7-day cloud storage. This camera just offers a ton of options for the price.
Price: $149.00 Where to buy: Tend and Amazon Source: The sample for this review was provided by Tend
Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.
I’m incredibly picky when it comes to pillows. That’s why I’ve been using the same one for more years that I want to admit because apparently, it’s gross to sleep on the same pillow for over a decade (maybe two). I’ve tried several types of pillows over the years but I keep going back to my “old faithful”. I even told the folks at BedGear that I’m a pillow snob, but they were still willing to let me try their M1X Pillows, so let’s take one for a… nap.
What is it?
The Bedgear M1X is a 20 x 26 inch pillow that comes in four sizes: 0.0, 1.0 2.0 and 3.0. Each pillow is identical, except for their profile or size/thickness. I told the folks at Bedgear that I am a side sleeper 99% of the time, so they sent me their M1X 2.0 and 3.0 sizes.
Design and features
The M1X pillow comes packaged in a zippered bag and when I removed it, I immediately realized this was not going to be another $30 Kohl’s special. The Bedgear M1X pillow looks and feels superior to any pillow I’ve ever tried.
First of all, it has a curved area for your shoulder which is perfect for side sleepers like me.
The covering of the pillow features Dri-Tec and Air-X technology with a 3D mesh cover that is made of 98% polyester and 2% spandex and is supposed to help prevent allergens and dander from entering the pillow core. Speaking of the core, the M1X has a soft hypoallergenic shredded latex foam fill that provides great support and won’t bottom out. That’s pillow speak which means the pillow keeps its shape while you’re laying on it and bounces back, unlike some down filled pillows which get flat or lumpy during a sleep session.
The Bedgear is a comfortable pillow and I wanted to love it, but the thickness of the 2.0 and 3.0 pillows was a bit too high for me to comfortably sleep on through the whole night. I think I would be better off with either their 1.0 or even their 0.0 size.
That said, I do like the pillow quite a bit and the Dri-Tec and Air-X tech kept the pillow cool and dry even during the weird in-between weather we were having a few weeks ago when it was hard to regulate temps in the house at night with heat and AC. Even when the bedroom was slightly too warm, I didn’t feel sweaty sleeping on the Bedgear pillow.
There is one thing that’s important to mention about the Bedgear M1X pillow. It’s not machine washable. It’s only spot washable and with a price tag of $119, I think it should be fully washable for people who have problems with allergies.
What I like
Comfortable
Does get lumpy or flat
Stays cool
Comes in 4 sizes to match your sleep style and body size
What needs to be improved
Needs to be washable
Final thoughts
I just returned from a vacation in California where we stayed in 4 different locations, which meant 4 different beds with 4 different pillows. The first night we stayed at a Holiday Inn Express near the Indianapolis airport. It was a very nice hotel that was so new that you could actually smell the newness. The bed was comfortable, but their pillows were like sleeping on a boulder. I don’t think I slept at all that night because like I mentioned in the opening paragraph of this review, I’m a pillow snob and am very picky about the cushion I put under my head at night. The other 3 places where we stayed in California had better pillows, but I would have loved to have had one of the BedGear M1X pillows with me on the trip. Even though the 2.0 and 3.0 sizes are too thick for me, I have little doubt that their thinner versions would make me want to burn my antique pillow once and for all.
Price: $119.00 Where to buy: Bedgear Source: The sample for this review was provided by Bedgear.
Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.
The Wicked Audio Shred 2 wireless earbuds are wireless Bluetooth earphones that are optimized for ease of use and use during exercising and sports activities.
What’s in the box
Package contents:
1 x Wicked Audio Shred 2 wireless earbuds with neck loop
4 x loops (2 black, 2 lime)
4 x Large fins (2 black, 2 lime)
4 x Small fins (2 black, 2 lime)
12 x cushions (6 black, 6 lime)
1 x Instruction Booklet (This was missing from my sample)
1 x USB to Micro USB (This was missing from my sample)
Specifications:
10MM Driver
16Ohms Impedance
99DB Sensitivity
20-20,000 Hz Frequency
Bluetooth 4.2
Range 32ft/10M
Design and features
The Wicked Audio Shred 2 earbuds are nicely designed and built, and they make it easy for you to swap out the fins and loops as desired. The inclusion of both the black and lime colors add a sense of style.
I was able to use the setup right out of the box since they were a perfect fit for me.
The neck loop opens and closes magnetically, and this makes it very easy to hang around your neck.
These earbuds are very comfortable, and I wore them at about 45 minutes to one hour each time with no issues. As a matter of fact, they are so lightweight and comfortable that their presence is hardly noticeable. I tested them speed walking, jogging and with excessive and wild movement, and they stayed in place at all times.
Now on to performance and sound:
I normally listen to music on my iPhone for approximately 45 minutes each way to and from work, for a total of 90 minutes daily. When I first received the earbuds, I charged them fully on a Monday evening and started using them from the next morning.
The control part of the earbuds has 3 buttons for all of the music and phone functions. The bottom has the Micro USB port for charging. There is also the LED that is blue when on and when fully charged, and red when charging.
When you press the power button there is an audible click in the earbuds that indicate that the power is on. It is the same for powering off. Pairing is accomplished by holding down the power button for about 5 seconds until it blinks blue and red, which is typical of most earbuds. Pairing was very simple and without issue. Once the paring is done, there is an audible voice confirmation that says “connected”. If the earbuds disconnect from the Bluetooth connection, there is an audible voice confirmation that says, “Disconnected”. (This only happened when I was in an area with high interference where any and all of my Bluetooth headsets usually disconnect). What I did find to be strange is that when powering off, there is just the click and no voice confirmation. All of my other headsets with voice commands say “Power on” and “Power off” and “Connected” and “Disconnected”.
The power button also works as the “play” and “stop” button when listening to music. The top (+) button in music mode works as “volume up” and “track forwards”, and the bottom (-) button works as “volume down” and “track backwards”.
When using these earbuds for phone functions, the calls were crystal clear on both ends, with no distortion or unwanted frequencies.
These earbuds have better battery life than almost any earbuds I have owned. At 90 minutes of use each day without recharging, the first voice notification to charge them occurred on Friday afternoon after a total of about 5 ¾ hours of playing, and they were still at 40% charge when the alert first started. I was wondering why it alerted at 40% which seemed a bit early, but after approximately another 20 minutes of playing the charge dropped to 20%, and then the earbuds shut off after another 15 minutes. The total play time was over 6 hours at almost full volume, which to me is quite incredible.
I am an Audiophile, and I enjoy several genres of music. I tried these earbuds with Soul, R&B, Rock, Country, Gospel, and Jazz. They performed reasonably well across all genres. I decided to test them without any equalization to make all things equal. I found the Mids to be very present and very pleasant to my ears. The Highs were a bit overwhelming on most genres, and the Lows were ok but not as present and as deep as some of my other earbuds. After I was done with my initial testing, I did try using an equalizer to adjust the Lows, but the threshold was not much lower than without any equalization, and very quickly became just noise.
What I like
I like the fit and comfort of these earbuds. While the overall sound is not Audiophile grade, it is decent. The fact that they remain in place no matter the movements, and that the battery charge lasts very long, makes me a fan.
What can be improved
The only improvements that I would like to see, are with the sound in terms of more capable bass, more balanced Highs, and better voice commands. I would also like to see a volume control included with the controls.
Final thoughts
The Wicked Audio Shred 2 Bluetooth earbuds are very nice. While not perfect, they are great for sports and working out, as well as casual listening. Their long lasting battery life along with the short 1.5 hour charging time make them great for daily use.
Price: Currently not listed Where to buy: Wicked Audio Source: This sample was provided by Wicked Audio.
Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.
A modular photography system for iPhone focused on premium lenses and a CPL filter. Bitplay’s lenses are compatible with their iPhone cases (available for each model) as well as their Clip product if you want an alternative to cases or to use a lens on the front camera while using the SNAP! X case.
Hardware specs
Premium HD wide angle lens
Magnification: 0.604x
Minimum focus distance: 15 mm
Angle of view – Horizontal: 89.7º
Angle of view – Vertical: 102.9º
Lens construction: 6 elements in 6 groups
Dimensions: 44 (Ø) X 25.7 mm (H)
Weight: 36g
Premium HD telephoto lens Magnification: 2x
Minimum focus distance: 240 mm
Angle of view – Horizontal: 32.3º
Angle of view – Vertical: 39.8º
Lens construction: 5 elements in 4 groups
Dimensions: 44 (Ø) X 31.1 mm (H)
Weight: 53g
M52 CPL w/ adapter
Threads: M52 mm
Dimensions: 55 X 11.5 mm (CHECK DIMENSIONS)
Weight: 15.8g (lens only) (CHECK WEIGHT)
SNAP! X Dimensions: 14.4 x 7.4 x 1.65 mm
Weight: 53g
CLIP Dimensions: 35 x 37 x 18 mm
Weight: 10g
What’s in the boxes?
Premium HD Lens Series – Premium HD wide angle lens
– Premium HD telephoto lens
– M52 CPL filter, adapter and gasket
– User manuals
– Lens caps and storage bag included with each HD lens, zip storage case comes with the CPL filter
CLIP – Lens clip for iPhone, user manual
SNAP! X – Snap! camera case for iPhone X, wrist strap, extra adhesive handle, user manual
^ CLIP ^ ^ Premium HD Lens Series ^ SNAP! X camera case
CPL zip case ^ Phone leash ^ HD storage bag and lens caps
Design and features
Bitplay has approached their system from a photographer’s point of view and the result is a product that functionally and visually leans towards a point and shoot camera. For this review of their premium HD lens series, they provided the SNAP! X case as well as their clip, both of which provide the interface to your iPhone. Let’s look at the design of each of these components.
SNAP! X – The most visual aspects of the design is the retro “camera” look of the case, specifically the handle and the trigger button, both of which provide some balance to the camera mount area and lenses when attached.
The trigger button sits more proudly when the phone is installed
So how’d they get a new physical button to work where there’s no button on the iPhone? If you have an iPhone, you likely know that you can take a photo by pressing either volume button when in the camera app. Bitplay created a long lever arm that ties the new trigger button to one that presses the volume (-) button. Looking at the inside of the case you can see a small gap around the perimeter. This plate provides some internal clearance for that lever arm to freely pivot when the case is on a phone.
Most of the case is made up of PC and ABS for durability. The front edge of the case is TPU allowing for flexibility and a non-slip surface. The power and volume + buttons are part of that same injection process, and both have a good tactile response to presses. The handle is also TPU and provides a grippy surface for you to hold the whole setup with a single hand, much like a point and shoot camera.
Unique to the iPhone X model, the lens mount area has two mounting positions; one for each lens. You will only need the lower position if you’re shooting with portrait mode. The mount area is an aluminum insert which creates a butter smooth rotation for screwing in the lenses.
The lenses – The bell shape of the lenses is balanced by the curved glass lenses and it’s instantly apparent that these are not inexpensive lenses. The aluminum bodies have a silky black finish with the lens name for each cleanly printed on the side in white. That print and the telephoto being longer are the only visible differences between the two.
The flare of the bell shape extends past the peak of the glass lens allowing them to safely rest on a table if placed lens down. The mounting side has a small lens nested into the center of shallow threads for connecting to the case or CLIP with slightly more than a single 360º rotation.
Both lenses ship with front and back lens caps. The large front caps are soft, flexible and easy to use. The rear caps are stiffer, small and easy to lose.
M52 CPL Filter – The filter is designed specifically for use with these two premium HD lenses. Comes with the filter, an adapter and a TPU gasket
CLIP – The clip is designed to work on all iPhone models without a case, as well as on their SNAP series cases for the front camera.
Setup
I primarily used the SNAP! X case for this review, so let’s look at that setup first…
To put the case on, lead with the left side of the phone and start to push until both the top and bottom corners are in place, then push the right side of the phone down and into place. This is a pretty straightforward step, but I did have one install where the trigger button was fully depressed before install and the top edge of the volume (-) button got stuck between the case and the phone resulting in a couple hundred photos being taken in burst mode.
To install a lens, remove the back lens cap and screw the lens clockwise into place on the case.
To install the filter, unscrew the filter from the adapter and remove the TPU gasket. Sandwich the lens you want to use between the adapter and the gasket, then mount the lens to the case or clip. When you’re ready to use the filter, just screw it on to the front of the lens. Note that the lens cap does not fit with the filter in place. Bitplay does appear to sell that cap separately however.
To use the CLIP, unlock the clasp, slide the two faces apart and place onto your phone. Align the crosshairs for the center of your phone’s lens, squeeze the faces together and then re-lock the clasp. Now screw in the lens of your choice and you’re good to go.
Performance
The lenses are easier to use when running the case on your phone. I’ve had this case on my phone the majority of the last 4 weeks. I want to call out that fact because I usually switch cases every couple days rotating between a few favorites. I get annoyed with cases quickly and while there are a few things I’d change, the functionality is so good for what it does, that it has stayed on my phone consistently.
Using the system in the real-world brings out a couple of facts quickly. First is that this is a photography setup. The intent is for calculated shots that you’re taking the time to get right, or at least have put a lens on and you’re in ready-to-shoot mode. If something unexpected is happening, you’re unlikely to get your phone out and install a lens quickly. I’d file that under knowing what you’re getting into and not a deal breaker by any means. Second is adapting to a multiple lens scenario. We’ve gotten used to having a phone (camera) at our disposal that fits in your pocket. You can still pocket your phone with one lens, but adding a second lens and a filter and lens caps and it starts feeling pretty fidgety. Switching between lenses feels more than twice as difficult as I definitely did not want to drop a lens. If you’re transitioning from using a multiple lens camera, you’ve got a very different reference point and may not mind at all.
Let’s move past all that stuff though, because once a lens is in place on your phone (case or clip), you immediately forgot how it got there and start seeing what it can do to your photography.
Here’s comparison photos to look at. All should be clickable to zoom into the details.
Stock iPhone cameraHD Wide Angle LensStock iPhone cameraHD Wide Angle LensHD Telephoto LensStock iPhone camera HD Wide Angle Lens HD Wide Angle Lens w/ CPL Filter HD Telephoto Lens HD Telephoto Lens w/ CPKL FilterStock iPhone camera HD Wide Angle Lens HD Telephoto Lens
The lenses work pretty well for video as well. Here’s Muse playing “Uprising” at Bottlerock. This was shot with the HD Telephoto lens and otherwise would have been a lot further away.
Okay. So what’s it all mean? I was really happy with the quality of the images and the options provided by a telephoto and wide angle lens. As you can see above, the wide angle lens really opens up the field both horizontally and vertically providing an image much closer to what you actually see. The telephoto helps to solve that feeling of “I thought I was closer than that” and results in a great focused composition. Both lenses are really well made with a quality heft. They’re also easy to install and remove from the case and I guess that’s why I kept feeling a little anxious about the storage options as I’m not sure I want to find out how they’d fair if I dropped one. They’re heavy enough that I can imagine the bell of the body denting or worse… the glass lens shattering. Bitplay does offer a zipper storage case for both a single and a pair of HD lenses and I’d recommend picking up one of those if you don’t have a camera bag that would work for lenses of this size.
The CPL filter I have less to comment on. I can see some temperature differences in the images above, but I’m not sure it’s something I’d use. There is obviously a demand for filters in the traditional camera market, and similarly in the app world. Again, if you’re coming from a dedicated camera scenario then you’re likely to know if this is something you want.
I’m a huge fan of the case after using it for this review. It offers great protection to the entire phone including the front glass as the TPU edges sit proud of the screen. After using the trigger to take photos, I don’t want to go back to using the screen. It’s really easy to press without jostling the phone. The trigger does extend past the case a good bit and you will get some random photos as a result, or decreasing volume if it gets hit when you aren’t expecting it. The TPU handle is also pretty tall which works great as a handle and less great when you want your phone to lay flat on a table, or charging pad. It did not affect wireless charging, however.
What I like
The trigger button
The fit and durability of the case
Quality of the lenses and security of the mount
The TPU handle
What needs to be improved
Lens cap fidget factor when switching lenses – maybe add tethers?
Case does not lay flat when on a table (tilts phone away from you)
Volume button is really hard to get to
Lens/filter storage
Final thoughts
Bitplay has created a compelling photography system here. All the components are extremely well made, look and feel valuable. And they should, because at ~ $250 it’s a chunk of change to lay down, but the results are hard to argue with. You’ll want to be prepared to answer some questions as it’s hard not to notice either the lens or the case when you’re taking photos in public.
Prices: Multiple
$202.49 – Premium HD Lens Series (Wide Angle, Telephoto, CPL Filter)
$43.99 – SNAP! X camera case
$9.99 – CLIP Where to buy: Bitplay and Amazon Source: The sample for this review was provided by Bitplay.
Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.
SNAP! X camera case
CPL zip case ^ Phone leash ^ HD storage bag and lens caps
The trigger button sits more proudly when the phone is installed
