Use a little eruption disruption to clean the inside of your microwave

NEWS – OMG, is that a volcano in your microwave?! No, this isn’t a failed science fair project, it’s a little volcano that cleans the inside of your microwave. 

The Kitchen Gizmo Volcano Microwave cleaner is a fun and hassle-free way to clean cooked on grime from the inside of your microwave. No scrubbing required. All you need to do is fill the volcano with the required amounts of vinegar and water, place it in the microwave then run on high for 5-8 minutes.

Now sit back and watch as the Kitchen Gizmo volcano erupts and does all the hard work for you. And don’t worry, it’s only steam and completely safe. 

Afterward, all you need is a sponge, rag or paper towel and all the grime, comes right off. You can even add a few drops of lemon extract to the volcano to freshen up the entire kitchen. Let’s see your junior high science fair project do that.

Who knows, with this little volcano, you might even clean your microwave more than once a year.

The Kitchen Gizmo Volcano Microwave cleaner sells for $11.69 and is available from Amazon.

Filed in categories: News

Tagged: ,

Use a little eruption disruption to clean the inside of your microwave originally appeared on The Gadgeteer on August 15, 2019 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

CookPerfect wireless meat thermometer review

REVIEW – Is anything better than a perfectly cooked meal? The main course, done exactly to your liking, makes for the perfect dining experience. But, how do you know when your main course is done?  And, what if folks like things done to different levels?  CookPerfect can help with its dual-probe wireless meat thermometer.

What is it?

The CookPerfect is a wireless meat thermometer that supports two independent temperature probes. It connects to their app on your Android or IOS device via Bluetooth to provide cooking progress and tells you when the meat is done.

What’s in the box?

  • CookPerfect main unit
  • Temperature probe with storage spool (a second probe/spool was also included for this trial)
  • Screwdriver
  • AAA batteries (2)
  • Quick start guide

Hardware specs

  • Width: 76mm
  • Height: 25mm
  • Probe length: 100mm (134mm overall)
  • Probe cable length: 1m
  • Bluetooth range: 100m
  • Battery life: 150 hours
  • Temperature range: -40C – +300C
  • Water resistance: IP45 (Protected from tools and small wires greater than 1 millimeter. Protected from low-pressure water jets from any direction)

Design and features

The top and bottom of the main unit are covered in shiny stainless steel.  It’s pretty but prone to fingerprinting and spotting. The bottom has a magnet in the base so you can stick it on ferromagnetic surfaces (think: steel).

The round main unit has two probe connectors on opposite sides of the unit.

While they resemble USB ports, the probe connector is a proprietary design.

Setup

Setup involves two steps:

  1. Install the batteries by removing the back of the unit with the included screwdriver, installing the batteries, and reinstalling the back
  2. Download the CookPerfect app to your Android or IOS device (and let it update the firmware…)

Performance

To begin cooking, attach one, or both probes to the main unit.  Connecting a probe powers-up the unit.  The center blue light flashes until it makes a Bluetooth connection to your device, at which point, it turns solid blue. Each probe has its own status light.  Flashing means it is connected.  Fast flashing means the internal temperature is within five degrees of the target.  Solid green means cooking is done.

Once the app is open and a probe is connected, insert the probe into the meat to the scribe mark on the probe.  The probes have multiple sensors along its length allowing for a more accurate core temperature reading. The exposed end of the probe has an ambient temperature sensor so the app can tell what the temperature is in the grill or oven.

Each probe can be programmed for a different cook level or even different type of meat.  To start, after selecting the probe to set up, you get a meat selection grid:

You choose the meat you are cooking, or, just pick quick start and select a target temperature.

If you go the meat choice route, you are presented with three options:

You can just choose the target temperature (same screen shown above), choose target doneness level or pick your doneness level by photo.

Here is the doneness selection screen:

And if you don’t know what those terms mean, you can use the visual doneness selection menu:

To me, the visual guide seems kind of silly, but I guess they are designing for newbie cooks who might know well done from medium-rare.

Once you get the probe in and the meat on the grill or in the oven, clicking Start Cooking brings up the status screen.

Note that the design of the screen needs work.  As long as temperatures are two digits or less, it looks good, but if the temp hits three digits, the degree symbol gets stuck behind the last digit.  Not a big deal, but lack of attention to this makes one wonder what else got missed in the app.

The Time when finished indicator remains a spinning circle for the first five minutes of cooking until the app calculates the remaining time based on internal temperature changes and ambient temperature in the grill or oven. Then it is replaced by an end time estimate in military time.  There is no option for a twelve-hour display.

Note that this screen doesn’t show Bluetooth status.  To make sure that the app is still connected to the CookPerfect, you need to go back a screen to the probe screen.

This screen has the same issue with the degree symbol.  It shows both the core temperature and ambient temperature along with the Bluetooth connection status but doesn’t show the estimated completion time. It sure would be nice to see everything on one screen.

Once cooking the target temperature is reached, the app sounds an alarm, letting you know it’s time to get the meat out of the grill or oven.

All this is fine and good, but it is only of value if the results are perfect.  I targeted medium steaks and the app used an internal temperature of 138 degrees Fahrenheit as the target temperature.  The steaks were perfectly cooked, just as we wanted.

Other niceties in the app include the ability to set multiple alarms based on cook time.  For example, you can set an alarm to let you know when there are 15 minutes remaining in the cooking time, perhaps so you can pop the dinner rolls in the oven or prepare the salad. You can choose between Celcius or Fahrenheit displays, but as I mentioned above target completion time is only in 24-hour format.

The biggest problem I have with the CookPerfect is that the Bluetooth range is nowhere near the 100-meter advertised range.  Granted, my situation isn’t ideal. My house is built with metal studs, and that certainly negatively affects Bluetooth range.  Even so, if the CookPerfect is supposed to have a 100-meter range, you’d think it would work from about 10-meters, even through the two walls between my living room and my grill. But it doesn’t. The Bluetooth disconnected constantly, forcing me to move more in a line-of-sight to my grill. I have another Bluetooth meat thermometer that has the same problem, so this isn’t unique to CookPerfect.  Its promised range is way more than my other thermometer so I was hopeful, but alas, I am disappointed.

What I like

  • Simple setup
  • Temperature sensors seem pretty accurate based on the cooking results
  • The probe cable is sufficiently long to allow easy placement in the grill or oven
  • You can create alarms based on remaining cooking time to help with meal prep

What I’d change

  • Improve Bluetooth range
  • Fix user interface display issues
  • Show time in 12-hour format as an option
  • Have a single screen that shows both cook progress and Bluetooth connection status
  • The app is pretty basic and doesn’t provide resting time after the cook
  • Change the battery compartment to not need a screwdriver to open

Final thoughts

Overall, the CookPerfect is a capable wireless meat thermometer.  It produces great results and is pretty easy to use. Its app is far less sophisticated than others I have used and there are some nagging display issues that I hope can be fixed with a software update. If your needs are basic and the range isn’t an issue, the CookPerfect will most certainly improve your meat cooking results.

Price: $99.99
Where to buy: Amazon
Source: The sample of this product was provided by CookPerfect.

Filed in categories: Reviews

Tagged: ,

CookPerfect wireless meat thermometer review originally appeared on The Gadgeteer on August 12, 2019 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Say goodbye to smelly and clogged drains with FOG Safe drain guards

NEWS – I love bacon, but I don’t like the grease it leaves behind. There’s just no good way to get rid of it. I keep it in a jar in my refrigerator along with other leftover cooking greases. I mean it’s not like you can just dump it down the drain. Or can you? With the FOG Safe grease & oil-absorbing drain guards, you can.

FOG safe specifically targets Fats, Oils, and Grease, hence the name. Each grease catcher is made from recycled paper and absorbs up to four ounces of oil (about the amount of grease from a pound of bacon)

FOG Safe fits all standard size drains. So no more worrying about clogs, smells, or backups. The drain guard can also be used on the counter or inside the sink.

And cleanup is easy. Once all of the oil is absorbed, toss the drain guard into the trash.

The FOG Safe grease & oil-absorbing drain guards come in packs of nine. You can purchase them from The Grommet for $14.95. 

Filed in categories: News

Tagged: , ,

Say goodbye to smelly and clogged drains with FOG Safe drain guards originally appeared on The Gadgeteer on August 8, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Honeywell TurboForce Tower Fan Review

REVIEW – I’ve got quite a few fans around my house, mainly because my wife has asthma and likes the air to circulate – all of the time. The Honeywell TurboForce Tower Fan looked like it might be able to finally make her happy.

What is it?

The Honeywell TurboForce Tower Fan is an oscillating dual tower fan that has separate controls for each fan.

What’s in the box?

List contents – you can remove this heading and section if it doesn’t apply to your review.

  • Honeywell TurboForce Tower Fan
  • Base



Design and features

The Honeywell TurboForce Tower Fan is a pretty simple design that incorporates two fans with an oscillating base. A top and a bottom fan ensure a very wide range of air movement. At 32″ tall it stands tall enough to be a bit off of the floor, but not so tall that it will get in the way.

The smaller top fan unit has a tilt-adjustable head that tilts up to 90 degrees upward which helps circulate the air from the ceiling area of a room. The top fan is a standard circular style 6″ fan. The bottom fan is a 12″ drum style fan that blows air directly forward. It really moves the air!

Each fan has a separate, easy to operate, 3-speed control knob. The unit has a separate on/off push switch for the oscillation feature instead of a rotating knob like some fans have.

This fan really moves a lot of air. My living room is 14’x20′ and this fan is plenty strong enough to not only move the air around, but I actually get chilled from it.

The oscillating tower design is nice in that it does not swing widely from side to side like other oscillating fans. This makes it not only operate in less space, but it does not have any distracting motion that you can see out of the corner of your eye.

What I like

  • The top tilt-adjustable fan is great
  •  4 position knobs (Off-Low-Medium-High)

What I’d change

  • Nothing I can think of

Final thoughts

Overall both my wife and I both love this fan. It moves the air around very nicely and it’s not very loud. It also eliminates the need for several fans. I like the fact that it’s a pretty standard design without any cryptic push-button features that are difficult to figure out. Simply plug it in, turn a knob and enjoy!

Price: $79.99
Where to buy: BestBuy and Amazon
Source: The sample of this product was provided by Honeywell.

Filed in categories: Reviews

Tagged: ,

Honeywell TurboForce Tower Fan Review originally appeared on The Gadgeteer on August 8, 2019 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Kärcher K2000 electric pressure washer review

REVIEW – When I review a gadget, audio gear or household item, I seldom write about a product’s long-term durability. The reason for this is that we at The Gadgeteer strive to write reviews quickly so you can make an informed buying decision sooner. I wish we did, but we don’t have a year to test a product before writing. This review of the Kärcher K2000 electric pressure washer is a bit different. While I don’t have any foreknowledge regarding the K2000’s long-term future, I do have history with Kärcher—and based on that, I have an idea how long the K2000 will last.

What is it?

The Kärcher K2000 is an electric pressure washer that has a pressure rating of 2,000 PSI (per square inch) and 1.3 GPM (gallons of water per minute). It has dual detergent tanks, 25 ft. of hose, 35 ft. electric cord with a GFCI plug, a handy, wind-up hose reel and wrap around cord storage. It’s made for home (not professional) use.

Specs

  • 120-Volt 
  • 13 Amps
  • 35 ft. GFCI cord
  • Wobble Pump
  • Dual 1 quart detergent tanks 
  • Cold temperature 
  • 2000 PSI pressure
  • 1.3 GPM water flow
  • 25 ft. Hose
  • Hose reel 
  • M22 industry standard hose connection
  • 2 wheel cart 
  • Spray gun
  • Three pressure nozzles
  • Weight: 46.4 lbs.
  • Length: 22 in.
  • Width: 18.25 in.
  • Height: 35.5 in.
  • 3 Year warranty

Design and features

Living in a humid climate means dirt, mildew and other stuff showing up on outdoor surfaces, such as backyard decks, siding and concrete driveways and sidewalks. Only a pressure washer can easily and safely remove this. 

For those who’ve never used a pressure washer, think of it as a super-powerful spray nozzle, except that it can actually clean surfaces by blasting away dirt and mildew. I find it kind of therapeutic and fun to pressure wash around my property.

There are two types of pressure washers; gas and electric. I’ve borrowed gas versions from family and friends before and while they are powerful, they drink gas, are loud, stinky and incredibly heavy. Electric models are lighter, quieter and not as powerful as gas, but the gap has narrowed. 2000 PSI on an electric pressure washer is not uncommon and is plenty powerful for home use.

I became familiar with Kärcher when I bought a less powerful pressure washer about ten years ago. That washer was not treated kindly and I lost (and never replaced) the removable water filter long ago, so all kinds of water contaminants were passing through the pump for years. Despite this mistreatment, the Kärcher only became unreliable a few months ago and finally needed replacing. It’s because of the Kärcher’s toughness that I decided to stay with the brand and go with the more powerful K2000.

The K2000 pressure washer is extremely simple to set up out of the box—about 10 minutes. Once assembled, just plug it in, connect the hoses and you’re cleaning. The handle quickly folds down so it takes up less space in the garage. 

Even though the Kärcher K2000 is much lighter than a gas model, it’s still almost 50 lbs. Two oversized wheels make moving the unit around easier. My older Kärcher had small wheels and a too short handle. You had to bend over to move it. It was—literally—a pain in the back to move.

One major change from my previous Karcher washer is a step-controlled on/off switch. This is much more convenient and also easy on the back. There are two large, removable storage bins on the unit for holding detergent bottles for the dual tanks as well as the pressure wand. The dual detergent tanks can be used independently by turning a 1 or 2 dial.    

Using the Kärcher 2000 is easy with one notable exception. It takes some effort to squeeze and hold the trigger on the wand handle. All pressure washers I’ve used are like this and I don’t get it. After using a while, fingers and hand muscles can get tired from continually squeezing the trigger. However, there is a way to make this less stressful on your hands. When using the washer, mentally designate a small area to clean. When that’s done, choose the next small area. This breaks up any large job into smaller jobs which helps make things less overwhelming. Plus, it gives your muscles a rest between sections. It’s also best to use a sweeping motion when spraying. Doing it in these smaller areas gives better results.

One thing I like about the K2000 is that as soon as you stop spraying, the motor shuts off until you start spraying again. You don’t have to listen to a loud motor the whole time, as with a gas model. The downside to this is that when you resume spraying, the motor takes a second to rev up to speed. It’s mildly annoying, but you get used to it.

All hoses and nozzles on the K2000 use M22 quick connections. This is an industry standard that allows you to easily swap parts and provides a secure, water-tight fit. It also allows other branded nozzles and hoses to be used with the Kärcher. However, once I wasn’t careful when connecting a nozzle. When I pressed the trigger, the nozzle flew across the yard and I had trouble finding where it landed. I learned my lesson—double check that the connection is secure before using! 

The K2000 comes with three nozzles. The 15° nozzle concentrates more power on a smaller area. This helps with more stubborn dirt or mildew. The 40° nozzle covers a wider area but with a bit less power. It’s a good nozzle for general cleaning and it’s the one I use 90% of the time. Then there’s the turbo nozzle. This nozzle sprays in a cylindrical, cone-shaped pattern that becomes more powerful as the nozzle is moved closer to the surface being cleaned. I’m not a fan of this nozzle because power severely drops off when the nozzle is raised farther away from the surface. It requires too much thinking to use and I like to switch off the brain while pressure cleaning. 

The nozzles snap into a built-in holder on the K2000, making it easy to quickly grab the one you need while keeping the others safe when not in use. 

There’s a soap nozzle for applying detergent when washing a car or pre-cleaning a driveway or deck before pressure washing. Speaking of using detergent—I don’t. Never have. I also do not use a pressure washer to wash my car because if you’re not careful, the pressurized water can strip paint if it’s already loose on a bumper or it can force water into areas it shouldn’t. A garden hose spray nozzle can’t do that kind of damage. I realize that some people love using a pressure washer for their cars—I’m just wary of it. 

Detergent can help with a dirty deck, but again, I just stick to the 40° nozzle because it works fine as is. Care must be taken with cleaning wooden decks with a pressure washer. The water can damage deck wood if placed too close to the surface for too long. 

Kärcher does not supply a sample-sized detergent bottle with the K2000, so it’s an additional purchase if you want to try it. Trust me though, you don’t need detergent to clean concrete—just time, water and pressure. 

What I like 

  • Powerful
  • Auto shut-off motor
  • Nozzle selection 
  • Standard M22 connections
  • Wheels!
  • Relatively quiet for a pressure washer
  • Foot operated on/off
  • Affordable

What I’d change

  • Trigger could be easier to press

Final Thoughts

I’m a fan of Kärcher pressure washers. Kärcher makes many electric models as well as more powerful gas models if that’s what you need. If you’re a homeowner who only needs a pressure washer occasionally, the K2000 is more than powerful enough to get the job done with minimal fuss. It’s affordable and should last a long time—based on personal experience. Plus, it doesn’t take up much room when stored. 

Price: $279 US
Where to buy: Amazon
Source: The sample for this product was provided by Kärcher.

Filed in categories: Reviews

Tagged: ,

Kärcher K2000 electric pressure washer review originally appeared on The Gadgeteer on August 2, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.