SpyTracker Nano GPS tracker review

REVIEW – Wanting to track or find physical items by attaching some sort of small device is as old as suspicion. It’s taken until the advent of small wifi and cellular transmitters to make it happen at a price point that normal people can really consider. I’ve been testing out the Nano from SpyTracker, a wireless tracker which would have made for good science fiction just a few years ago.

What is it?

A closed box roughly 3″ x 1.5″ x 1″. There is a smooth face with three LEDs labeled for GPS, PWR, and CEL. On one of the long sides there is a waterproof covered charging port (miniUSB cable included) and on one of the smallest sides there is a power button, also weatherproof. Next to the power port is a SIM card port covered with a piece of plastic and secured by two very small Phillips screws. There’s also a weatherproof SOS button on the face with the LEDs.

What’s in the box?

  • GPS unit itself
  • USB-A to miniUSB cable
  • wall charger

Design and features

The Spytrack Nano is a solid little black box that broadcasts its position every ten seconds. The service is available worldwide and, while it’s not cheap, it’s better than most phone plans. You can view the location of the Nano from within the website, or with a mobile app. This is where all the setup happens.

There’s an SOS button the user can trigger to alert you, or you can determine a geographical area you want it to stay in, and get an alert when it leaves. You can see velocity, position, and travel routes in real-time or as history. If you have serious gear (think video gear for a location crew, or scientific gear that you have to ship to a location for a project), you’re able to see exactly where it is while it’s being shipped. With a ten-day standby time, any but the longest travel times will be covered.


This device is dead simple. While it’s not the “James-Bond, hide-it-in-your-shoe-heel-size,” it’s still able to tell you where it is reliably every ten seconds from anywhere on the globe. Sure, there are creepy ways to use this technology, but there are also very legit ways that this could enhance your life. Say you’ve got a route manager servicing stores with whatever product you’re selling. Someone calls and says, “Hey, when is the guy gonna be here today?” You pull out your phone, check the location of the truck, and see it’s on the way to your caller. Or 20 miles away in traffic. Without bothering your driver, you can give your customer a heads up so they can plan.


Or, in my case, I have an aging mother who still cherishes her independence. She lives near one of my sisters, but if she was in town, you can bet this would be in her bag, and at 63 grams, she’d never notice it. But she’d be happy to know her son was looking out for her. Sure, I could track her iPhone, or get her an Apple Watch to wear, but this is much cheaper, has longer battery life, and even offers her an SOS button if she just wants me to check on her. (Better believe that would be worn out!) The screenshot below will show your location, and that of the tracker, and allow you to plot an intercept course. My phone thought I was across the street in the neighbor’s yard, but the tracker knew right where it was. Different service, different towers, different triangulation.

 

Setup

When the unit arrived, it was already activated and a login assigned. I was able to resign it to a different account with no issues. Loading the app and logging in worked without a hitch. You can purchase additional service time in the app when your plan expires. Prices currently range from £10/device for a month to £85/device for a year, purchased in advance.

Performance

The app behaved itself like a pro throughout my testing period. I was able to see historical routes by date and time, watch the progress in real-time or speeded up, and find my way to the device from my smartphone.

What I like

  • Light and tough
  • No real operational tasks
  • SOS button

What I’d change

  • Price for service is a bit high, but it is global and unlimited

Final thoughts

At some point in your life, there’s going to be something you want to track: a parent, child, vehicle, or shipment. This unit provides that service in a fairly inexpensive package, and you can just toss it in a drawer and reactivate it (top-up) when you want to use it. There is no setup, other than to pair it to the app, which takes all of a minute.

Price: £59.99 (US$72.82 as I write this)
Where to buy: Rewire Security
Source: The sample of this product was provided by Rewire Security.

Filed in categories: Reviews

Tagged: ,

SpyTracker Nano GPS tracker review originally appeared on The Gadgeteer on August 12, 2019 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Deal of the day – Save $70 off a Roborock S6 vacuum

DEAL NEWS – It’s time to put your fears of robot overlords away and embrace the convenience of having one do the chores you don’t want to do, like vacuuming the floors in your home. To help you get over these fears, Roborock is offering a $70 off coupon on Amazon for their S6 vacuum (black model) which is normally priced at $649.99 but through August 18th, the price is down to $579.99. If you’ve not heard of the Roborock brand, I can help you there too because we’ve reviewed several of their vacuums including the Roborock S6 which Samuel said

The RoboRock S6 has become a key appliance in our house, being run on pretty much a daily basis to help clean up the cooking mess that made it to the floor, the stray hairs and the pet dander/hair that accumulates in all the hard to reach places. We love using the mop feature in the kitchen, as it’s apparent that dirt doesn’t always show itself on these floors. With two humans and four 4-legged friends, we need to work to keep the floors clean so it’s very convenient to be able to hit one button on our smartphones rather than go through the hassle of getting the stand-up vacuum out on a daily basis. I would strongly recommend this vacuum for those who need a robotic being to clean up after them from time to time!

So head over to Amazon and make sure you click the $70 off coupon box when you put the vacuum in your cart.

Filed in categories: News

Tagged:

Deal of the day – Save $70 off a Roborock S6 vacuum originally appeared on The Gadgeteer on August 12, 2019 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

CookPerfect wireless meat thermometer review

REVIEW – Is anything better than a perfectly cooked meal? The main course, done exactly to your liking, makes for the perfect dining experience. But, how do you know when your main course is done?  And, what if folks like things done to different levels?  CookPerfect can help with its dual-probe wireless meat thermometer.

What is it?

The CookPerfect is a wireless meat thermometer that supports two independent temperature probes. It connects to their app on your Android or IOS device via Bluetooth to provide cooking progress and tells you when the meat is done.

What’s in the box?

  • CookPerfect main unit
  • Temperature probe with storage spool (a second probe/spool was also included for this trial)
  • Screwdriver
  • AAA batteries (2)
  • Quick start guide

Hardware specs

  • Width: 76mm
  • Height: 25mm
  • Probe length: 100mm (134mm overall)
  • Probe cable length: 1m
  • Bluetooth range: 100m
  • Battery life: 150 hours
  • Temperature range: -40C – +300C
  • Water resistance: IP45 (Protected from tools and small wires greater than 1 millimeter. Protected from low-pressure water jets from any direction)

Design and features

The top and bottom of the main unit are covered in shiny stainless steel.  It’s pretty but prone to fingerprinting and spotting. The bottom has a magnet in the base so you can stick it on ferromagnetic surfaces (think: steel).

The round main unit has two probe connectors on opposite sides of the unit.

While they resemble USB ports, the probe connector is a proprietary design.

Setup

Setup involves two steps:

  1. Install the batteries by removing the back of the unit with the included screwdriver, installing the batteries, and reinstalling the back
  2. Download the CookPerfect app to your Android or IOS device (and let it update the firmware…)

Performance

To begin cooking, attach one, or both probes to the main unit.  Connecting a probe powers-up the unit.  The center blue light flashes until it makes a Bluetooth connection to your device, at which point, it turns solid blue. Each probe has its own status light.  Flashing means it is connected.  Fast flashing means the internal temperature is within five degrees of the target.  Solid green means cooking is done.

Once the app is open and a probe is connected, insert the probe into the meat to the scribe mark on the probe.  The probes have multiple sensors along its length allowing for a more accurate core temperature reading. The exposed end of the probe has an ambient temperature sensor so the app can tell what the temperature is in the grill or oven.

Each probe can be programmed for a different cook level or even different type of meat.  To start, after selecting the probe to set up, you get a meat selection grid:

You choose the meat you are cooking, or, just pick quick start and select a target temperature.

If you go the meat choice route, you are presented with three options:

You can just choose the target temperature (same screen shown above), choose target doneness level or pick your doneness level by photo.

Here is the doneness selection screen:

And if you don’t know what those terms mean, you can use the visual doneness selection menu:

To me, the visual guide seems kind of silly, but I guess they are designing for newbie cooks who might know well done from medium-rare.

Once you get the probe in and the meat on the grill or in the oven, clicking Start Cooking brings up the status screen.

Note that the design of the screen needs work.  As long as temperatures are two digits or less, it looks good, but if the temp hits three digits, the degree symbol gets stuck behind the last digit.  Not a big deal, but lack of attention to this makes one wonder what else got missed in the app.

The Time when finished indicator remains a spinning circle for the first five minutes of cooking until the app calculates the remaining time based on internal temperature changes and ambient temperature in the grill or oven. Then it is replaced by an end time estimate in military time.  There is no option for a twelve-hour display.

Note that this screen doesn’t show Bluetooth status.  To make sure that the app is still connected to the CookPerfect, you need to go back a screen to the probe screen.

This screen has the same issue with the degree symbol.  It shows both the core temperature and ambient temperature along with the Bluetooth connection status but doesn’t show the estimated completion time. It sure would be nice to see everything on one screen.

Once cooking the target temperature is reached, the app sounds an alarm, letting you know it’s time to get the meat out of the grill or oven.

All this is fine and good, but it is only of value if the results are perfect.  I targeted medium steaks and the app used an internal temperature of 138 degrees Fahrenheit as the target temperature.  The steaks were perfectly cooked, just as we wanted.

Other niceties in the app include the ability to set multiple alarms based on cook time.  For example, you can set an alarm to let you know when there are 15 minutes remaining in the cooking time, perhaps so you can pop the dinner rolls in the oven or prepare the salad. You can choose between Celcius or Fahrenheit displays, but as I mentioned above target completion time is only in 24-hour format.

The biggest problem I have with the CookPerfect is that the Bluetooth range is nowhere near the 100-meter advertised range.  Granted, my situation isn’t ideal. My house is built with metal studs, and that certainly negatively affects Bluetooth range.  Even so, if the CookPerfect is supposed to have a 100-meter range, you’d think it would work from about 10-meters, even through the two walls between my living room and my grill. But it doesn’t. The Bluetooth disconnected constantly, forcing me to move more in a line-of-sight to my grill. I have another Bluetooth meat thermometer that has the same problem, so this isn’t unique to CookPerfect.  Its promised range is way more than my other thermometer so I was hopeful, but alas, I am disappointed.

What I like

  • Simple setup
  • Temperature sensors seem pretty accurate based on the cooking results
  • The probe cable is sufficiently long to allow easy placement in the grill or oven
  • You can create alarms based on remaining cooking time to help with meal prep

What I’d change

  • Improve Bluetooth range
  • Fix user interface display issues
  • Show time in 12-hour format as an option
  • Have a single screen that shows both cook progress and Bluetooth connection status
  • The app is pretty basic and doesn’t provide resting time after the cook
  • Change the battery compartment to not need a screwdriver to open

Final thoughts

Overall, the CookPerfect is a capable wireless meat thermometer.  It produces great results and is pretty easy to use. Its app is far less sophisticated than others I have used and there are some nagging display issues that I hope can be fixed with a software update. If your needs are basic and the range isn’t an issue, the CookPerfect will most certainly improve your meat cooking results.

Price: $99.99
Where to buy: Amazon
Source: The sample of this product was provided by CookPerfect.

Filed in categories: Reviews

Tagged: ,

CookPerfect wireless meat thermometer review originally appeared on The Gadgeteer on August 12, 2019 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Destructive Malware Cases Increased By 200% in 2019

When we cover viruses and malware, we usually discuss how the trend of malicious programs has moved away from being simply destructive tools and moved towards spying and harvesting information for profit. However, destructive malware is still very much out there. It’s just not targeting you or your home PCs anymore! Where Destructive Malware Thrives Destructive malware is a choice tool of hackers for two reasons. First, it can be used as espionage to shut down large information servers owned by businesses. Second, it can be used as a threat against someone to pay up, usually via ransomware…. Read more

How to Calibrate Your Android’s Sensors for Better Performance

The sensors in your phone may not be something you think about regularly, but you’ll know when they stop working correctly. Malfunctioning sensors can cause serious issues with the apps that you use. Since they affect the performance of the phone, you should keep them in good working order. Checking the sensors is one thing you should try before taking your phone in for repair because there are several options to fix the problems for free. Related: How Adaptive Battery in Android Makes Your Phone Battery Last Longer Diagnosing Sensor Issues If you are using an app, such as a racing app, that reacts to… Read more