X3 Bar home gym review

REVIEW – How can you build muscle without spending hours in a gym each week and spending money on monthly membership dues? Sure, you can work out at home with your own fitness gear, but that can get expensive too and there’s the matter of all the time you have to devote several days a week to do the actual workouts. Then there’s the X3 Complete Home Gym that claims to build muscle by only spending 10 minutes 4 days a week. There has to be a catch right? Let’s find out.

What is it?

The X3 system is a home gym system invented by Dr. John Jaquish, a biomedical engineer. The portable workout system uses three parts. There’s the ground plate, the bar, and a set of heavy-duty latex bands.

What’s in the box?

X3 bar
Ground plate
4 bands
Exercise charts

Design and features

The main and most important component of the system is the X3 bar. The 23.5 inch bar is made of stainless steel with a special hook design to hold the exercise bands and ball bearings that allow the hooks to rotate freely for wrist comfort.

The bar has a well made substantial feel. There’s no way this thing is going to break or bend. I bet you could even run over it with a truck and it wouldn’t be any worse for the wear. I wouldn’t advise testing that theory though.

The biggest part of the X3 system is the ground plate which is a CNC milled high-density polyethylene 19 x 10-inch plate that has been designed to stand on for some of the exercises. The top of the board has raised dots that keep it from being slippery but you’ll want to use the board on a non-slippery surface and not a bare hardwood floor like I’m showing here.

There’s a wide routed slot on the bottom of the ground plate which allows the exercise bands to fit under the plate while you’re standing on it.

X3 bar + bands + ground plate = let’s build some muscle!

Let me start out by saying that I’m not that strong. I’m a 5’6″ 129lb female that had a double mastectomy back in 2011 due to a fun-filled adventure with breast cancer which left me with some minor range of motion and upper body strength issues.

I work out 3 times a week on a lower tier priced Total Gym system, but I am a sucker for workout gear and thought the X3 looked interesting with the claims of building 3x the muscle working out only 10 minutes a day 4 times a week.

The X3 website outlines a 12-week workout program with videos that explain how to do the exercises which consist mainly of

  • Chest press
  • Tricep pushdown
  • Overhead press
  • Squat
  • Deadlift
  • Bicep curl
  • Bent row
  • Upward row
  • Calf raise

In the videos, Dr. Jaquish also talks about nutrition info and medical research info that backs up the system that he’s created. Actually, he talks a lot in his videos and I kept wishing for videos that were less talk and just demonstrations of the exercises that I could follow along with while doing my daily workouts.

The X3 bar ships with 4 latex bands that are different widths which translates into different strengths or weights.

The extra-lightweight band – 10 to 50 lbs, then doubled over 100 lbs
The light weight band – 25 to 80 lbs, then doubled over 160 lbs
The middle weight band – 50 to 120 lbs, then doubled over 240 lbs
The heavy weight band – 60 to 150 lbs, then doubled over 300 lbs

You have to choose the band that is right for you for each exercise so that you can do the exercise with the proper form for as many reps as it takes to get to total fatigue.

The X3 workout system has two different workouts for each week. One workout is done on Monday and Thursday and the other workout is done on Tuesday and Friday. Each workout only has 4 exercises and you only need to do 1 set of each exercise. That hardly sounds like a workout that will build muscle right? Well, trust me when I say that you will work up a sweat because you have to do each exercise to fatigue. That means you do reps until you can’t do another one. That’s all there is to it but it’s not quite as easy as it sounds, especially if you’re not all that strong like me. I had problems with a few of the exercises.

The exercises are done with the band hooked in the bar hooks or looped around the ground plate and the X3 bar. In the image above, I’m doing a chest press with a band doubled around my shoulders. This is one of my favorite X3 exercises because it’s easy to get into position, but sometimes the band separates around the back of your shoulders. It would be nice if there was a clip that could keep the band doubled and stacked correctly.

This is the triceps pushdown position and while I enjoy working triceps, this particular exercise can be uncomfortable because the band needs to rest across your trapezius muscle and not your neck. If you don’t have a big trapezius muscle (I don’t), it can feel awkward and painful especially if you try to use a band that is too strong for you. I have to use the 2nd weakest band for this exercise and sometimes I feel like it’s going to snap my collarbone. You can also do this exercise with the band around the back of your shoulders similar to the chest press exercise, but I find that to feel even more awkward for me.

And here I am demonstrating an upward row with the band under the ground plate and looped once through the X3 bar.

The main X3 exercise that I have trouble with is the squat. For that exercise, you’re supposed to put the band under the ground plate and through the bar as you see above, but then you are supposed to rest the bar across your arms in front of your shoulders/pectoral muscles. Well, I don’t have a chest at all now. I’m completely flat like a 12yr old boy, so I don’t have anything to balance the bar across and it’s a bit painful to have the bar across the tops of my arms when there’s not a lot of padding there. You can see what I mean by watching Dr. Jaquish demonstrate that exercise.

Why is this type of workout equipment effective?

The X3 exercises use variable resistance and stabilizing muscle firing which means that the tension on the muscle is not constant throughout the exercise and puts less stress on your joints where you’re weaker and more stress where you’re strongest. According to Dr. J, exercising this way will cause an increase in the release of human growth hormone which has a lot of health benefits for your whole body including helping your muscles grow.

What I like

  • Compact/portable system
  • 10 minute workouts 4 times a week

What needs to be improved

  • Expensive
  • Can be difficult for beginners to do all the exercises
  • Safety concerns  with some exercises like overhead press, tricep pushdowns, and squats

Final thoughts

In all honesty, I hated the X3 bar the first time I tried it because I found it awkward to use the bands because they would separate or twist across my back. I also had problems with some of the exercises due to my own strength and body shape. After the 3rd or 4th workout, I started becoming more accustomed to getting the bands in position and began liking the workouts a little more. I’ve now used the X3 bar about a dozen times and I definitely feel stronger. I can almost even do a real pushup now (sorta). Don’t laugh but it’s been a goal of mine to be able to do a real pushup for the past 2 years and only just in the last week have I been able to do one. I can only go down about 4-5 inches, but I couldn’t do that at all before and I think the X3 system has made the difference.

Does the X3 system help you build muscle? Yes, I truly believe that it does. But you can get the same results from other workouts and equipment. That means you have to decide if you’re willing to spend $500 on this system. I actually prefer my existing Total Gym to the X3 system because I can do a lot more exercises with it. But that equipment requires a lot more room than the X3 system and I’ve been using that equipment for years and am seeing more results now using the X3 for 10 minutes a day 4 times a week vs. the Total Gym for 30 minutes 3 times a week. I plan to continue using the X3 and the Total Gym so I can have a variety. I’ll update this review in a couple of months as I continue to use this system.

Price: $499.99
Where to buy: X3bar.com
Source: The sample for this review was provided by X3.

Filed in categories: Reviews

Tagged: ,

X3 Bar home gym review originally appeared on The Gadgeteer on October 17, 2018 at 1:43 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

KIZIK handsfree shoes, Doorbird doorbell, Denon Heos speaker, and lots more – Review updates

REVIEW – You’re going to be here a while because we have 20 review updates for you today of reviews from as far back as 2014 and as recent as just this past summer. Check out the list of updated reviews below and you can find the actual updates at the bottom of each review.

Click & Grow Smart Garden 9 review by Julie Strietelmeier

SHOTBOX portable photography light box review by Julie Strietelmeier

Logitech Craft keyboard review by Julie Strietelmeier

Kizik Handsfree New York Shoe review by Howard Sneider

Pluto Pillow Review by Andy Chen

Master & Dynamic MW60 wireless and MW50 wireless headphones review By Bill Henderson

TaoTronics Elune Dimmable LED Desk Lamp review by Kathleen Chapman

Denon Heos 3 wireless speaker review by Kathleen Chapman

OxyLED T120 Dimmable Eye-care LED desk lamp review by Kathleen Chapman

Thermacell Mosquito Repellent review by Kathleen Chapman

DoorBird Video Doorbell review by Kathleen Chapman

MPOW Swift Bluetooth 4.0 Headphones review by Kathleen Chapman

Runtastic Libra Bluetooth Smart Scale and Body Analyzer review by Kathleen Chapman

Scosche EZTIP FlatOut LED Micro-USB Charge & Sync Cable review by Kathleen Chapman

Foobot air quality monitor review by Kathleen Chapman

Garzini Essenziale and Essenziale Finestra wallets review by Kathleen Chapman

WatchAir Smart (WiFi) Antenna review by Kathleen Chapman

Netatmo Presence Outdoor Security Camera review by Kathleen Chapman

Epson WorkForce ET-16500 Wide-format EcoTank all-in-one printer review by Kathleen Chapman

Jaybird X3 Wireless Bluetooth Headphones review by Kathleen Chapman

Filed in categories: Reviews

Tagged:

KIZIK handsfree shoes, Doorbird doorbell, Denon Heos speaker, and lots more – Review updates originally appeared on The Gadgeteer on October 17, 2018 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Give your cat a climbing structure even if you don’t have a lot of free floor space

NEWS – Cats like to climb, and if you don’t give them something to climb on, they’re likely to climb your curtains.  If you don’t have enough floor space to dedicate a chunk of it to one of those big climbing trees, you may think you have no other options, but that’s not true.  The K&H Hangin’ Cat Condo hangs over the back of a door, leaving your floors free for furniture and walking paths.

The condo is made of waterproof, 600-denier nylon fabric that can be washed.  The compartments have a stiffening board in the bottom for support, and there are five levels with a total of seven exterior holes for your cat to climb in and out of.  There are also connecting holes inside so the cat can climb between levels.  It mounts to most any door with four brackets, two on the top and two on the bottom of the door.

The structure is 65″ tall and 16″ deep.  It’s available in your choice of 16″ (small) or 23″ (large) widths.  The small climbing condo is $64.20; the large is $85.63.  The K&H Hangin’ Cat Condo is available at the Chewy website.

Filed in categories: News

Tagged:

Give your cat a climbing structure even if you don’t have a lot of free floor space originally appeared on The Gadgeteer on October 17, 2018 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

LifeShield DIY Home Security System review


REVIEW – For many years, I have been a firm believer in having a home security system not only for protection from theft but also from fires and other important events that can occur without warning. The LifeShield Security System seems to be feature packed and seems to have the potential to be the security system of choice for my home.

What is it?

The LifeShield DIY Home Security System is an all-in-one Do It Yourself security system that offers entry/exit protection, protection from fires and carbon monoxide (not offered as a device), video recording and image snapshots, as well as live monitoring.

What’s in the box

Depending on the package you order, the system comes in a large box that contains designated smaller boxes based on function. For this review, there are 4 boxes within the main box.



1 x Base Unit
1 x AC Power Supply Adapter
1 x Ethernet Cable
1 x Wall Mounting Bracket
1 x Phone Cable
1 x Wall Mounting Bracket
1 x Packet Wall Anchors and Screws
1 x Power cable and Wall Wart (Actually belongs to a component in Box 2 but came ion Box 1)
1 x Instruction Booklet



1 x Entry Keypad
1 x Stand
1 x Wall Mount
1 x Asus Tablet (Touch Control Panel)



2 x Motion Sensors
3 x Entry/Exit Sensors
1 x Keyfob Alarm Control
1 x Keyfob Case
1 x Fire Safety Sensor
Wall Anchors and Adhesive Mounting Strips



1 x Indoor Security Camera
1 x Camera Mount
1 x AC Adapter
1 x Ethernet Cable
1 x Wall Anchors and Screws

Design and features

Starting with the base unit, there is a mounting bracket that you attach to the wall and the base unit attaches to the bracket. You can also place the unit on a horizontal flat surface if you prefer not to mount it. At the bottom of the base unit, there is the AC power port, the Ethernet port, a telephone port, and an antenna jack. Neither the telephone port nor the antenna jack was used for this test and review.




The security pad also comes with a wall mount bracket that I decided to mount as well. I chose an appropriate area near my front door. At the back of the security pad, there are two back up AAA batteries and the AC adapter power jack. Conduits are built into the back of the unit to route the AC wire. On the front of the security pad, there is a numeric pad, one-touch function buttons, and the LCD status display screen.




A Keyfob remote control is also included. It allows you to arm and disarm the system, and to trigger the panic mode if necessary.


On the front of the included camera are the microphone, the lens, and the infrared sensor. This camera produces clear HD images that can be viewed as a single image or as a video via the app.



On the right side, there is a micro SD card slot for onboard recording. Much like cloud recording, the onboard SD card records based on your custom setup which can be set to record at specific dates and times or when a sensor is triggered.


LifeShield also sent a repeater with a built-in sounder to ensure that there is a strong signal from the base unit to all of the sensors and that the alarm is loud enough to attract the desired attention. On the surface of the repeater, there is a status LED and a sound vent. On one side, there is a reset button and the AC jack.


Performance

The alarm system arrived with all of the included sensors already paired to the base unit. The instructions are clear which makes the DIY process simple enough for anyone to accomplish the installation. The hardest part is figuring out the best location in your home for mounting the camera and the motion sensors. The entry/exit sensors go in the obvious places that would protect the exterior access to your premise. Three entry/exit sensors were included. In my case, I installed one on my front door, and one on my fire escape window. Since I live five floors up, the other windows are inherently safe. I decided to use another sensor on the door to my equipment safe. I have a few safes, and I am still contemplating the placement of the third sensor.


I installed the base unit first, and then in order, followed the instructions to set up the included tablet touchpad. There are packages that come without the Touchpad, so I would assume that if yours does not have the touchpad, you would move right on to the security pad. As you can see in the picture below, when you first install the system is in test mode. It remains this way for the first 7 days while you learn to use the system and become familiar with it. The security pad has the keypad to enter your security code, and buttons to are the systems in the available modes and also to disarm it. As a side note, you are also required to set up an account online via the following link: https://login.lifeshield.com/#/login


When the system is active, the LED around the “off” button turns blue.


I mounted one motion sensor on a corner wall of my living room and the other in the kitchen.



The Fire Saftey Sensor recognizes the alarm sound from your existing fire/Carbon Monoxide Sensor to trigger the Lifeshield alarm and to alert the live monitoring station. I use a Nest system, and I mounted the Fire Safety Sensor next to one of the units. The manufacturer suggests a distance of approximately 3 inches between the sensor and your smoke alarm unit.


Below are pictures of the touchpad that once setup allows you to control all of the functions and settings of the system.





App Screenshots


Notification Screenshots

What I like

  • The build quality of all of the components
  • The capabilities and flexibility of the system
  • The professional and prompt customer service
  • The types of integrated components that are available, like the Touchpad
  • The expansion capabilities

What can be improved

  • The package should include an integrated fire/carbon monoxide sensor unit
  • Possibly a slightly lower monthly live monitoring cost

Final thoughts

LifeShield DIY Home Security System is really a very easy system to set up and includes all of the necessary functionality to manage the system both locally and remotely via the app. There were a few times when I had to reach out to their customer service, and they were extremely responsive. The system is very responsive and while I did not trigger a real emergency response for obvious reasons, I did test the sensors in Test Mode. I do believe that the live monitoring would work well. This is a very good security system, and the quality of the included components is great. Overall, it gets two thumbs up!!

Price: 24/7 Professional Monitoring at $39.99 per month for 36 months. (Equipment included for free)
Where to buy: Lifeshield Website
Source: The sample for this review was provided by LifeShield.

Filed in categories: Reviews

Tagged:

LifeShield DIY Home Security System review originally appeared on The Gadgeteer on October 17, 2018 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

The new JLab Flex Sport just might be the ultimate on-ear fitness headphones

NEWS – I love working out, and an essential part of my workouts includes listening to music, so a good pair of headphones is a must. Over the ear, Bluetooth sports headphones are nothing new, but the Flex Sport Wireless Bluetooth Headphones from JLAB Audio may be the perfect workout headphones.

The Flex Sport Wireless Headphones offer 20 hours of listening time and a custom fit adjustable tension headband. Two removable Tension Bands allow for three different fitting preferences. Loose, normal or tight.

And the headband is capable of being twisted 180 degrees without breaking. 

The headphone’s ear pads are sweat resistant and moisture wicking. They can also be removed for quick, easy hand or light machine washing.

As far as audio is concerned there are 3 different equalizer settings, Signature, Balanced, and Bass Boost modes, all without having to download a separate app.

JLab also uses something they call Be Aware Audio which allows you to hear your music and natural ambient noise at the same time. So you can hear things around you like car horns or your workout partner. This feature can also be turned off for those times when you really want to get into the zone.

Other features include universal controls for volume and music track control, Bluetooth 4.2, 40mm drivers along with a built-in microphone for taking calls. The microphone can even be used to activate Siri and Google Assistant.

The JLAB Audio Flex Sport Wireless Bluetooth Headphones sell for $99.99 and are available from the JLab website or Best Buy.

Filed in categories: News

Tagged: ,

The new JLab Flex Sport just might be the ultimate on-ear fitness headphones originally appeared on The Gadgeteer on October 17, 2018 at 8:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.