Adonit Droid stylus review

I remember when you had to have a stylus to enter text on your PDA. Then when finger friendly touchscreens took over, styluses became an accessory that most people no longer needed or even wanted. That said, there are still many people who enjoy using styluses to draw and write on their tablets and smartphones. Through the years, Adonit has been an innovator in the stylus market and their latest offering is the Droid stylus that has been designed for Android devices. Let’s take a look.

What is it?

The Adonit Droid is a capacitive stylus just for Android devices. It doesn’t require batteries, Bluetooth, or any special software in order to use it.

Design and features

The Droid stylus is made of anodized aluminum and is available in three colors including the blue version that was sent to me. It has a smooth sandblasted type of finish that makes it comfortable to hold.

With the cap in place, the Droid stylus is 4.72 inches (120mm) in length.

The cap unscrews to reveal the stylus tip which is a small plastic disk that Adonit calls the Precision Disc. The disc swivels on a metal ball joint tip.

This type of stylus tip is not new. Adonit has featured this type of stylus many times over the years. In the image above, I show two other Adonit styluses with the new Droid stylus on the right. The main difference between the Droid and the other Adonit styluses shown here is the size of the disk. It’s significantly smaller at 0.19 inch (4.75mm).

As mentioned above, the Precision Disc swivels on the tip to allow for natural writing. The Adonit website states that the Droid has a non-removable tip, but it appears that Adonit actually sells disc replacements in their shop for $14.99 each. That’s pretty spendy for a tiny piece of plastic and a metal tube. It’s more than half the price of the whole stylus.

The stylus cap can post on the back of the stylus barrel which is a nice feature. The stylus itself is very slim at only 0.27 inches (7mm) wide. Although I didn’t find it uncomfortable to use, a slightly larger version of the Droid stylus might be more comfortable for people with larger hands than mine.


I tested the Adonit Droid stylus on my Samsung Galaxy Tab 3 and my Pixel 2 XL and found that it felt like similar capacitive styluses that I’ve used. I also tried it on an older iPad and it would not work at all which surprised me. The only thing I can think of is that the tip is just too small for iOS devices.

I had no real issues using the Droid stylus, but the experience is not even close to as nice as the Samsung S Pen which truly does feel like using a pen on paper. Granted, the S Pen is only compatible with certain Samsung devices so it’s not fair to compare them.

What I like

  • Small and slim
  • Doesn’t require batteries
  • Doesn’t require Bluetooth or special software

What needs to be improved

  • The price for a replacement disc should not be so expensive

Final thoughts

I still find styluses useful especially for doodling and sketching and occasional note taking. I find that scribbling a long note with a stylus is a lot faster for me than using the onscreen keyboard. I like that the Adonit Droid’s Precision Disc stylus tip is so small because it makes it much easier to see what I’m writing or drawing. Other capacitive styluses can have large rubber tips that block the view of the digital “ink” as you’re trying to work.

If you are an Android user and use a stylus, check out the Adonit Droid. It’s a nicely made stylus that barely takes up any space in your pocket or bag. And although it’s expensive to replace the disc tips, it is nice that the option is available.

Price: $24.99
Where to buy: Amazon
Source: The sample for this review was provided by Adonit.

The post Adonit Droid stylus review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged:

Adonit Droid stylus review originally appeared on The Gadgeteer on May 4, 2018 at 12:00 pm.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

The Olloclip Mobile Photography Box set is the lens accessory your iPhone X deserves

Olloclip was one of the first ever quick-connect lens systems for iPhone featuring fisheye, wide-angle and macro lenses. I owned the first version for the iPhone 4S. I really liked being able to attach different lenses to my iPhone. And I was able to take some really cool photos. Fast forward a few years to the all-new Mobile Photography Box Set for iPhone X. Like the iPhone’s camera, the Olloclip has changed and improved.

Using their new Connect X system (exclusive to the iPhone X) you can easily interchange lenses with just a snap. It unlocks with the push of a button and clips onto the iPhone X’s camera.

Choose from three premium multi-element coated glass lenses, Fisheye, Super-Wide, and my favorite the Macro 15x. The easy to use lens system intuitively aligns with both front and back lenses of your iPhone. This allows you to attach a lens to each simultaneously, which should definitely help up your selfie game. And the mount expands to work with nearly all screen protectors.

Unfortunately, the system doesn’t work if you have a case on your iPhone. However, you can purchase Olloclip’s own Slim Case for $30 if you want that extra protection.

The system even includes a Pendant stand that opens to create a pocket-sized tripod.

The Olloclip Mobile Photography Box Set for iPhone X is available on Amazon for $99.99.

The post The Olloclip Mobile Photography Box set is the lens accessory your iPhone X deserves appeared first on The Gadgeteer.

Filed in categories: News

Tagged:

The Olloclip Mobile Photography Box set is the lens accessory your iPhone X deserves originally appeared on The Gadgeteer on May 4, 2018 at 11:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

My First Lab STEM Starter Kit: Smartphone Microscope and 3D Slides review

As a child long, long, long ago, I remember longing for a microscope in order to study things that were too small for me to see and tragically, I never received one. I now have a marvelous stereo microscope but it is too large and heavy to carry around with me to investigate things while I’m outside. When the My First Lab STEM Starter Kit: Smartphone Microscope and 3D Slides came up for review, it piqued my interest. I eagerly volunteered to review this tiny microscope. After receiving it, I discovered that it is a clever little microscope that works well magnifying small objects, is easily portable, and it allows you to take pictures of your microscopic adventures using your phone’s camera. Perfect for a big kid like me.

What is it?

The My First Lab STEM Starter Kit: Smartphone Microscope and 3D Slides is a science, technology, engineering, and mathematics (STEM) kit that includes a clip-on smartphone (or other mobile devices) microscope and 3D slides. The slides are paperboard slides with small items glued to them to observe using the microscope.

What’s in the box?


  • My First Lab Smartphone Microscope (60x magnification – with the aid of your phone’s camera zoom)
  • LED light and UV light are attached to the microscope (LR1130 button cell battery is replaceable)
  • 3D paperboard slides which contain 15 specimens to observe

Design and features

The smartphone microscope appears to be made out of silver colored hard plastic. It has a clear plastic ring over the end of the microscope to protect the lens. The smartphone microscope is mounted to a white plastic clip and rotates at this juncture. The clip that holds the microscope to the mobile device has black foam padding on both sides. This keeps the microscope from sliding around on your device and it helps to avoid damaging your phone.

Attached to the microscope on a rocker mechanism is the LED/UV light. There is a cap/dial on the end of the light that you’ll need to twist (you might have to push in and twist) to turn on or off the lights or change the battery. To access the dial, you’ll first need to rotate the whole assembly out from under the clip.

In addition to the microscope, you receive 15 specimens to study mounted on paperboard slides. They include samples of salt, sugar, pepper, cotton, silk, wool, a feather, insect leg, animal hair, rocks, sand, broken shells, pine cones (seed?), seeds, and hair.In the photo above, you can see the microscope lens used for magnification.The above photo shows that the light contains three LED bulbs.

The center LED is the UV light.And the everyday use lights are the two outer LEDs.When the cap/dial is removed from the light, you can access and replace the LR1130 button cell battery when necessary.

How to use the microscope

 

The back of the packaging contains the instructions for using the microscope and LED lights. When you clip the microscope on your mobile device, you need to make sure that the microscope covers the camera lens. NOTE: Your camera lens must be within about 2.5 cm from the edge of your phone to use this microscope. The clip will not reach farther. Moreover, my phone only has one camera, so for those of you who have more than one, you may have to experiment which lens to place the microscope over.

The packaging also tells you the correct positions of the dial to turn on the UV light, turn off all lights, turn on the LED lights, and open the battery compartment.

First of all, you’ll need to turn on the LED lights to observe an object. Starting at the very top of the light is the UV light “On” position, the zero represents the “Off” position, the shining icon represents the LED lights “On” position, and the last position allows the cap to come off to replace the battery. To turn on the lights you’ll need to twist the cap to the desired lights “On” position. Again, you may have to push in and twist to do this.

Next, you need to clip the microscope lens over your mobile device’s camera lens.
Finally, to view any specimen, you must place the end of the microscope’s clear plastic ring directly onto the surface containing the specimen to obtain a clearly focused subject. You may increase this distance a maximum of 1 cm by gently pulling the microscope away from the clip, though I never needed to do this. This ring not only protects the microscope lens but also helps place the specimen at the correct distance from the microscope for the clearest view.

Use

When I first used the microscope with my Pixel 2 XL, I used it to study all of the specimens on the prepared slides. The above photo illustrates the magnified view of the insect leg specimen included in the kit. The above photo does NOT include any additional magnification from my camera’s zoom. I used my phone’s camera to take a photo of the microscope’s magnified view. I think this magnification is about 10x.

Even though the microscope says it magnifies objects by 60x, I think the My First Lab company assumes that you have a camera zoom and takes that into account when calculating the total magnification of the microscope. That means if the microscope has a magnification of 10x and your phone magnifies 6x, then the total magnification is 10 x 6 = 60x. This is why I think the microscope, by itself, magnifies 10x.
My Pixel 2 XL magnifies objects by 7x, so my total magnification may be about 70x as shown above.

The above photo is actually the pollen comb of a honey bee’s hind leg. It is also the first tarsal segment of a honey bee foot. The bee brushes all the pollen off her body and places it in the pollen basket just above this segment. Those are the clumps of yellow you see clinging to honey bees’ hind legs. Unfortunately, the rest of the foot (tarsal segments) of the bee’s leg was broken off on my specimen. But WOW, it’s fascinating being able to see the detail of the pollen comb using this tiny microscope’s full magnification!

The next few photos are of insects from an insect collection I made while in graduate school studying entomology.

This is a normal photo taken of a sulfur butterfly (family Pieridae). My camera was about 5″ away from the subject. You can tell the butterfly’s relative size when compared to a quarter.Using just my camera’s maximum magnification (7x) without the microscope, this is what the butterfly’s wing looks like with the quarter in the background.This is the view of the wing after attaching the microscope to my phone (without camera magnification).
This is the view through the microscope with the addition of my camera’s maximum magnification. It is difficult to get a crystal clear, focused picture of any specimen using the maximum magnification of this microscope. However, it makes a great companion while you explore the outdoors because it is small and portable.

My larger, heavier microscope has infinitely better optics and provides 90x magnification to obtain a crystal clear magnified image. However, I do not have the equipment to take photos of what I see while using my larger microscope.I took a picture of another area of the wing using maximum magnification (microscope + my camera’s zoom). Look at the details of the scales and the fringes of the wings! Isn’t that magnificent?Next is a photo of an iridescent bee from the insect family Halictidae (the family of sweat bees). This photo illustrates how large this bee is in relation to a quarter. My camera was about 5″ away from the bee.This is another photo of the bee using my camera’s maximum magnification (without the microscope).I then attached the microscope to my phone and took a photo (no additional magnification from my phone’s camera).
Here is the same bee magnified to about 70x (microscope + camera magnification). I really like this little microscope! You can tell that the compound eye is made up of hundreds of ommatidia – so cool.

Overall, I found that the microscope worked really well for me as long as I placed the clear plastic ring directly on the surface containing the object I wished to see. Every now and then, the LED lights flickered but this was easily addressed by adjusting the dial on the light. I did not use the UV light, but you could use it to look at the patterns on flower petals that only show up under UV light.

What I like

  • The microscope and LED lights work well
  • Microscope magnification + phone magnification ≅ 60x total magnification
  • You may use your phone’s camera to take pictures or videos of your specimen
  • There’s foam padding on both sides of the clip to keep the microscope from sliding around and to prevents scratches
  • It seems durable
  • It’s small and portable
  • Inexpensive

What needs to be improved

  • Don’t expect crystal clear images when using the highest magnification
  • Your camera lens must be within about 2.5 cm from the edge of your phone to use this microscope

Final thoughts

I really enjoyed using the My First Lab STEM Starter Kit: Smartphone Microscope and 3D Slides. The kit includes a small microscope that is perfect for kids ages 6 and up (or big kids like me). In addition, the kit also comes with five prepared paperboard slides which have a total of 15 specimens to study. However, it is important to know that the purpose of the microscope is to magnify macroscopic objects or organisms (things that can be seen with the naked eye). It will not magnify microscopic organisms enough to for you to see (like those in pond water – you’ll need a compound microscope for that).

This microscope is easy to use; works well; is small, portable, and durable; allows you to take pictures of your microscopic adventures (YES!!); and has a replaceable battery for the LED lights. I would have LOVED receiving this as a kid!

NOTE: you may purchase just the microscope without the slides for only $11.

Price: $17.99 (kit) or $11.00 (microscope + LED light only)
Where to buy: Amazon (kit) or Amazon (microscope + LED light only)
Source: The product used in this review was provided by My First Lab.

The post My First Lab STEM Starter Kit: Smartphone Microscope and 3D Slides review appeared first on The Gadgeteer.

Filed in categories: Reviews

Tagged:

My First Lab STEM Starter Kit: Smartphone Microscope and 3D Slides review originally appeared on The Gadgeteer on May 4, 2018 at 10:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

Bomber & Company B-2 Nano Blade looks adorable yet serious

Look, I don’t know if it’s actually possible to look both adorable and serious at the same time, but Bomber and Company might just have pulled it off with their tiny but mighty B-2 Nano Blade knife. In a fully jet black color scheme with angular edges, this keychain-sized folding knife’s appearance was inspired by the U.S. Air Force’s B-2 “Spirit” Stealth Bomber. Weighing in at less than 1 oz, it is 3.15 inches long open, 1.9 inches long closed and has a 1.19 inch blade length, so it is quite small, but a nice size for EDC. Its blade is half straight portion and half aggressively-serrated teeth. Its blade and body are made from 440C heat treated black stainless steel and it also includes a small black spit ring and hook. But one of the B-2 Nano Blade knife’s best features might be its price at $19.99. Visit Bomber & Company for more info or Amazon to order.

The post Bomber & Company B-2 Nano Blade looks adorable yet serious appeared first on The Gadgeteer.

Filed in categories: News

Tagged:

Bomber & Company B-2 Nano Blade looks adorable yet serious originally appeared on The Gadgeteer on May 4, 2018 at 9:00 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.

The BenQ BL2711U 27″ 16:9 4K UHD IPS Monitor is a feature packed display for a bargain price


Since I recently wrote a news story about an amazing BenQ 4K monitor that would work great for photographers and videographers, I decided to write about another BenQ monitor that is also great, but without the price tag of the one in my previous article. While there are many great 4K monitors on the market today, I have always been a fan of the quality of BenQ monitors, so I am taking this time to highlight a few.

The BenQ BL2711U 27″ 16:9 4K UHD IPS Monitor offers a 3840 x 2160 resolution, and 178 degree horizontal and vertical viewing angles. Additional features include a 16:9 aspect ratio, 300 cd/m² brightness rating, 1000:1 contrast ratio, and a 4 ms response time. It also supports up to 1.07 billion colors.

This monitor has a CAD/CAM Mode for “clearly distinguished details in complicated object wireframes”, an Animation Mode “to make distinguishing detailed textures in darkened areas easier”, and a ten-level animation mode that offers “10 levels of display brightness adjustment to reveal details in darkened areas for a precise design”.

There is also Picture-in-Picture (PIP) “for enhanced convenience and productivity”, and BenQ’s proprietary Flicker-free Technology which eliminates any screen flickering.

If you would like to take a closer look at the feature packed monitor, or if you would like to purchase it, head over the Amazon or B&H Photo Video. It has a purchase price of $449.

The post The BenQ BL2711U 27″ 16:9 4K UHD IPS Monitor is a feature packed display for a bargain price appeared first on The Gadgeteer.

Filed in categories: News

Tagged: ,

The BenQ BL2711U 27″ 16:9 4K UHD IPS Monitor is a feature packed display for a bargain price originally appeared on The Gadgeteer on May 4, 2018 at 8:02 am.

Note: If you are subscribed to this feed through FeedBurner, please switch to our native feed URL http://the-gadgeteer.com/feed/ in order to ensure continuous delivery.